ENGLAON 32G90 32 QHD 2K Gaming Monitor User Guide
- June 13, 2024
- ENGLAON
Table of Contents
Gaming Monitor User Guide
LED32G90
Ⅰ. Safety Precautions
- Do not leave the Monitor near water sources, such as bathrooms, washing machines, dishwashers, kitchens, swimming pools or in wet basements.
- Do not place the Monitor on an unstable car, chair, or table. If the Monitor falls down, it can injure the user and cause damage to the device. You can place the Monitor in a car or on chair accordance to the recommendations of the manufacturer or Monitor supplier. If you fix Monitor to a wall or shelf, the fixed installation must be approved by the manufacturer and install it in strict accordance with the procedure.
- There are many long and narrow holes in the upper and lower parts of the rear shell for ventilation. To ensure that the Monitor continues to operate without overheating, these holes cannot be blocked or covered. Therefore, the Monitor must not be placed on a bed, sofa, rug, or similar surface, and it cannot be placed close to a radiator or heat source. It cannot be placed in bookcases or boxes, unless ventilation is ensured,
- The operating supply voltage range of Monitor is indicated on the rear shell label. If you cannot confirm the voltage supplied, consult your dealer or local power company.
- When the Monitor is not used for a long time, please turn off the power, which will prevent electric shocks and abnormal power supply voltage damage during lightning storms.
- Do not overload the socket, otherwise it may cause fire or electric shock.
- Do not hold the base to pull the whole machine upside down.
- Do not put foreign matters inside the machine, which can cause a short circuit and cause fire or electric
- Do not open the rear shell to protect it from high pressure or other hazards. If there is a fault, please contact the after-sales service personnel directly.
- Please plug the Monitor’s plug into the nearest convenient electrical socket.
- The altitude and tropical environment for the adapter are determined by the adapters that are provided.
- The rear nameplate is marked with a warning sign for this type of machine , which indicates the product is only suitable for safe use at an altitude of 2000m and below.
- The rear nameplate is marked with a warning sign for this type of machine, which indicates that the product is only suitable for safe use in non-tropical climate conditions.
Class one energy efficiency label
| Energy efficiency(cd/W) | >1.05 |
|---|---|
| Energy consumption in closed state(W) | <0.5 |
| Energy efficiency rating | Class 1 |
| The number of energy efficiency national standard based on | GB 21520-2015 |
Class two energy efficiency label
| Energy efficiency(cd/W) | >0.85 |
|---|---|
| Energy consumption in closed state(W) | <1.0 |
| Energy efficiency rating | Class 2 |
| The number of energy efficiency national standard based on | GB 21520-2015 |
Warning 1: To prevent fire or explosion, do not expose the display to rain or
wet environment. There is a dangerous high voltage in the Monitor.
Do not open the shell. If you need repair, you shall find a professional
service person.
Warning 2: It is installed and connected to an output socket with protective
earth termination by service personnel.
Ⅱ. Connectivity
- DC-DC IN 12V
- USB-USB IN 12V
- HDMI2-HDMI2 IN
- HDMI1-HDMI1 IN
- DP-DP IN
- EARPHONE-EARPHONE OUT
Ⅲ. Diagram of Control Keys
- Menu key
- Press the Up or Down key to adjust the Settings
- Exit key/Auto adjust key
- Press the power button to power on/off the monitor.
Ⅳ. Installation Instruction
1. Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged. Fix the stand body to the back of the monitor with the screws.
2. Fasten the bracket to the base with screws.
3. Attach the cover plate by pressing it onto the stand body.
4. Complete
V. OSD Adjustment Instructions
| Main menu item | Main menu icon | Submenu items | Range Of Values | Instructions |
|---|---|---|---|---|
| Picture | Brightness | 0-100 | Users can adjust the brightness display in the |
standard mode.
Contrast| 0-100| Users can adjust the contrast display in the standard mode.
ECO Mode| Standard| Users choose the appropriate ECO mode according to
personal prefrences.
Game
Movie
Text
FPS
RTS
HDR| Off| Users can switch this menu item to adjust the HDR effect.
On
Flikerfree| Off| Users can switch this menu item to adjust the Flikerfree
effect.
On
Image Setup| | lmage Ratio| Wide| Users choose the appropriate image items
according to personal preferences.
4:3
Color Setup| | Color Temp| Warm| Users choose the appropriate color temp.
Items according to personal preferences.
Cool
User
Red| 0-100
Green| 0-100
Blue| 0-100
Low Blue Mode| 0-100| Users can adjust this menu items to reduce eye damage.
OSD Setup | | Language| English| Users choose the appropriate language items
according to personal preferences (Nineteen Language)
Japanese
Korean
Russian
Simplified Chinese
H. Position| 0-100| Users can adjust the OSD position, timer, transparence.
V. Position | 0-100
Timeout| 10-60
Transparence| 0-100
Led Effect | Off| Users can switch this menu item to adjust the Led Effect.
On
Reset| | Reset| /| Press this menu to restore default values.
Extra| | Input Select| DP| Users can select the personal preferences source.
HDMI1
HDMI2
OSD Mute| Off/On| Users can switch menu items to be on/off.
Volume| 0-100| Users choose the appropriate Volume temp. Items according to
personal preferences.
Free Sync| Off/On| Users can switch menu items to be on/off.
Overdrive| Off/On
Ⅵ. Specification parameter
XD-B Series
|
Size
|
32 inch
---|---|---
Model Name
|
LED32G90
LCD Panel
|
Brightness(Typical)
|
250cd/m2(Typ)
NTSC
|
72% NSTC
Contrast(Typical)
|
3500:1 (Typ)
Resolution (H x V)
|
2560 (H) ×1440 (V)
Aspect Ratio
|
16:9
Response Time(Typical)
|
1ms (OD)
View Angles LR,UD(CR>10)
|
H 178°/ V 178°(Min)
Panel Surface
|
Anti-Glare
Display Colors
|
8bit+FRC colors
PC Input Range
|
Vertical Freq.
|
165Hz
Max. display frequency (Resolution H*V/Fv)
|
2560*1440 /165Hz
Interface
|
Input 1
|
HDMI x 2
Input 2
|
DP x 1
Input 3
|
USB x 1
Output Terminal
|
Earphone
|
Earphone x 1
Speaker(Typic )
|
2W*2(8Ω)
Projection screen
|
Wireless projection
|
NA
Wired projection
|
NA
Power
|
Consumption(Typical)
|
Standby≤0.5W
PD POWER
|
60W
Power Mode Indicator Light
|
RED/BLUE (LED)
Operating Condition
|
Temperature
|
0℃ ~40℃
Humidity
|
20% ~ 85%, non-condensing
Physical
|
Dimension (WDH)
|
716211521
Packing Dimension (WDH)
| 790116495
Net Weight|
6.5
Gross Weight
| 8.3
Tilt|
-15∘~30∘
VESA Mounting
| YES(75mm)
Swivel|
YES
Pivot
| YES
Kensington Lock|
YES
Accessory
|
Adapter
| 12V 5A
HDMI Cable|
x 1 (1.0M)
User Manual
|
YES
Color Plan|
Black
Carton Box|
Standard
Ⅶ. Frequently Asked Questions (FAQ)
| Problems that arise | Possible solutions |
|---|---|
| Power indicator light is off | *Check whether to turn on the power |
Check whether or not to connect the power line
Unable to achieve plug and play| Check whether the PC is matched with plug
and play
- Check whether the Monitor card is matched with plug and play
- Check whether the signal cable 15-pin D-shaped connector is bent
Image is dim| Adjust brightness and contrast ratio
Image jumps or appears rippled| There may be electrical devices that cause electrical interference around
The power indicator light is on (flashing),| Check whether the computer power is turned on
But the Monitor has no image display| Check whether the computer video card is inserted - Check whether the Monitor’s signal cable is properly connected to the computer
- Check the Monitor’s signal cable plug and make sure the pins are not bent
- Check whether the computer is operating by pressing the Caps Lock key on the PC keyboard
Lack of color (red, green, blue)| Check the Monitor’s signal cable plug and make sure the pins are not bent
The screen is not in the middle or the size is not suitable| Adjust the clock (CLOCK) or press the hotkey (AUTO)
The image has a color difference (white does not look white)| Adjust RGB color or reselect color temperature
Weak brightness and contrast ratio| When the Monitor is used for a period of time, if the brightness is reduced to affect normal use, please send the Monitor to an authorized service facility for repair
Image horizontal or vertical interference| * Turn off the Windows operating system and adjust CLOCK or execute the AUTO key.
Read this instruction manual carefully before use and retain it for future reference.
Documents / Resources
|
ENGLAON 32G90 32 QHD 2K Gaming
Monitor
[pdf] User Guide
32G90 32 QHD 2K Gaming Monitor, 32G90, 32 QHD 2K Gaming Monitor, 2K Gaming
Monitor, Gaming Monitor, Monitor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>