EGLOO SC-421P Easy and Smart Security Camera User Guide

EGLOO SC-421P Easy and Smart Security Camera

Product Information

Specifications

• Compliance: FCC Part 15
• Interference Level: Class B Digital Device

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Product Usage Instructions

1. Read and understand all instructions provided in the user manual before operating the product.
2. Ensure compliance with FCC rules and regulations.
3. Install the product in accordance with the provided instructions.
4. Connect the product to a power source using the appropriate power cable.
5. Follow the specific instructions for connecting the product toother devices, if applicable.
6. Turn on the product and follow any additional setup procedures outlined in the user manual.
7. Use the product as intended, following any guidelines or limitations specified in the user manual.
8. If experiencing interference with radio or television reception, turn the product off and on to determine if it is the cause. If interference persists, follow the recommended measures to correct the interference as stated in the FCC Interference Statement.
9. Avoid making any changes or modifications to the product thathave not been expressly approved by the responsible party for compliance.

FAQ

Q: What does FCC compliance mean?
A: FCC compliance means that the product meets the regulations and standards set by the Federal Communications Commission (FCC) in the United States.

Q: How can I determine if the product is causing interference to radio or television reception?
A: To determine if the product is causing interference, you can turn it off and on. If interference persists when the product is on, it may be causing the issue.

Q: What should I do if the product is causing harmful interference?
A: If the product is causing harmful interference to radio or television reception, you are encouraged to follow the measures outlined in the FCC Interference Statement to correct the interference.

Easy and Smart Security
EGLOO Camera
Quick guide for Registtion

What’s in the box

• Egloo Camera
• Micro 5 P’in Cable
• Power Adapter

OVERVIEW

Egloo A2

Quick guide for Registration

Before getting started
You can download the EGLOO App for free from the Apple App Store or Google Play Store .

Sign up & Log in

• If you don’t have an account, please tap “sign up” to create the account using your email address.
• After signing up, please log in with your account.

Registering device

•  Please tap the “Register Device” + icon to start

Adding Device

• Please select the device you want to install.

Camera registration

• Before starting camera registration, you can proceed after watching video.
• If finish to watch video, please move to Wi-Fi router with camera.
• Please connect power.tap “Next’ button if you meet Red LED on camera.

Check the status of camera

• When you hear installation message from camera and the Red LED starts to flicker, please tap the “Next” button

Connect smart phone to Camera

Android Phone

1. Please tap Wi-Fi settings”, move to Wi-Fi list
2. Please select “EGLOO_CAM_XXXX” from Wi-·Fl List
3. “Internet may not be available” message will appear. This means that the connection is done suooessfully. After this message appears, please ignore it and proceed

iPhone

1. Please mCNe to Wi-Fi list using Background
2. Please select “EGLOO_CAM_XXXX” from Wi-·Fi
3. You’re not getting any messages.
   Please proceed to install

Go to the ‘Select camera’

Android Phone
If “EGLOO_CAM_XXXX” Wi-Fi connection is completed,use the “Back” button to go back to the “Select camera” page on No.6

iPhone
If “EGLOOCAM)OO()(” Wi-F, aimectlOO 1s completed,use “Back ground feature on iPhone • to go back to the “Select camera page on No.6

Select Wi-Fi

Please select router’s Wi-Fi to connect the camera

If Wi-Fi isn’t detected in use
When using a telecommunications company’s Wi-Fi router

• Please request 2.4Ghz actication to the telecommunications company.
  When using an individual Wi-Fi router

• Please activate 2.4Ghz in the router’s setting

Enter Wi-Fi password

Please enter a correct Wi-Fi password

Please enter capital, small letter and special character correctly.

Connecting to server

• Please wait until the camera gets connected to the server
• When it’s done,it will proceed to the next step automatically;

Select Service

• Please enter camera name and selct storage method. Cloud or SD card

Cloud Recording

• Please enjoy safe Egloo cloud service.
  Thank you for purchasing Egloo camera,We are providing 3days recording service only for 30days After free service,it will be changed to SD card mode automatically.

Select the camera, and Enjoy!

How to Reset

Rear of the camera, on the power connection part

You will see a reset button.

• With the camera powered on, please press the reset button for about 10 seconds.
• When you hear ” Reset Completed.”, Camera has been reset successfully.

FCC Instructions

FCC Compliance Statement
This device canplies with part 15 of the FCC rules. Operation is subject ta the following two conditions·

1. This device may not cause harmful interference, and
2. this device must accept
   any interference received, including interference that may cause undesired operation.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>