ENGLAON 27G90 27 Inch QHD 2K Gaming Monitor User Guide

ENGLAON 27G90 27 Inch QHD 2K Gaming Monitor

Product Information

The product is a gaming monitor with the model number LED27G90. It has a 27-inch LCD panel with a resolution of 2560 x 1440 pixels and an aspect ratio of 16:9. The monitor has a typical brightness of 250 cd/m² and a contrast ratio of 4000:1. It supports a maximum refresh rate of 165Hz. The monitor offers multiple connectivity options, including HDMI x 2, DP x 1, and USB x 1. It also has an earphone output and built-in speakers with a power output of 2W*2(8). The monitor operates on DC12V power and consumes approximately 48W of power in typical usage. It supports a wide range of operating conditions with a temperature range of 0-40°C and a humidity range of 20% to 85% (non- condensing). The monitor comes with a stand that allows tilt adjustment and VESA mounting. It also includes a Kensington lock adapter for added security. The package includes an HDMI cable and a user manual.

Product Usage Instructions

1. Lay the monitor on a cloth with the LCD panel facing down to prevent damage.
2. Fix the stand body to the back of the monitor using the provided screws.
3. Fasten the bracket to the base using screws.
4. Attach the cover plate by pressing it onto the stand body.
5. Connect the desired input source to the monitor using HDMI, DP, or USB ports.
6. Power on/off the monitor using the power button.
7. Adjust the monitor settings using the control keys on the monitor. Use the Menu key to navigate through the settings and the Up/Down keys to adjust the values. Use the Exit/Auto Adjust key to exit the menu or automatically adjust the settings.
8. Adjust the OSD (On-Screen Display) settings for picture, image setup, color setup, brightness, contrast, ECO mode, flicker-free effect, image ratio, color temperature, low blue mode, language, OSD position, timeout, transparency, LED effect, input select, OSD mute, volume, FreeSync, and overdrive.
9. Refer to the user manual for the frequently asked questions (FAQ) section for additional information and troubleshooting.

Safety Precautions

• Do not leave the Monitor near water sources, such as bathrooms, washing machines, dishwashers, kitchens, swimming pools or in wet basements.
• Do not place the Monitor on an unstable car, chair, or table. If the Monitor falls down, it can injure the user and cause damage to the device. You can place the Monitor in a car or on chair accordance to the recommendations of the manufacturer or Monitor supplier. If you fix Monitor to a wall or shelf, the fixed installation must be approved by the manufacturer and install it in strict accordance with the procedure.
• There are many long and narrow holes in the upper and lower parts of the rear shell for ventilation. To ensure that the Monitor continues to operate without overheating, these holes cannot be blocked or covered. Therefore, the Monitor must not be placed on a bed, sofa, rug, or similar surface, and it cannot be placed close to a radiator or heat source. It cannot be placed in bookcases or boxes,unless ventilation is ensured,
• The operating supply voltage range of Monitor is indicated on the rear shell label. If you cannot confirm the voltage supplied, consult your dealer or local power company.
• When the Monitor is not used for a long time, please turn off the power, which will prevent electric shocks and abnormal power supply voltage damage during lightning storms.
• Do not overload the socket, otherwise it may cause fire or electric shock.
  • Do not hold the base to pull the whole machine upside down.
• Do not put foreign matters inside the machine, which can cause a short circuit and cause fire or electric
• Do not open the rear shell to protect it from high pressure or other hazards. If there is a fault, please contact the after-sales service personnel directly.
• Please plug the Monitor’s plug into the nearest convenient electrical socket.
• The altitude and tropical environment for the adapter are determined by the adapters that are provided.
• The rear nameplate is marked with a « warning sign for this type of machine, which indicates the product is only suitable for safe use at an altitude of 2000m and below.
• The rear nameplate is marked with a warning sign for this type of machine, which indicates that the product is only suitable for safe use in non-tropical climate conditions.

Class one energy efficiency label

21520-2015

Class two energy efficiency label

21520-2015

Warning 1 To prevent fire or explosion, do not expose the display to rain or wet environment. There is a   dangerous high voltage in the Monitor Do not open the shell. If you need repair, you shall find a professional service person.
Warning : It is installed and connected to an output socket with protective earth termination by service personnel.

Connectivity

1. DC-DC IN 12V
2. USB-USB IN 12V
3. HDMI2-HDMI2 IN
4. HDM I 1-HDMI1 IN
5. DP- DP IN
6. EARPHONE-EARPHONE OUT

 Diagram of Control Keys

1. Menu key
2. Press the Up or Down key to adjust the Settings
3. Exit key/Auto adjust key
4. Press the power button to power on/off the monitor.

Installation Instruction

1.  Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged. Fix the stand body to the back of the monitor with the screws.
2. Fasten the bracket to the base with screws.
3. Attach the cover plate by pressing it onto the stand hodv
4. Complete

OSD Adjustment Instructions

Specification parameter

LCD Panel

| Brightness(Typical)| 250 cd/m2（Typ）
NTSC| 72% NSTC
Contrast(Typical)| 4000:1 (Typ)
Resolution (H x V)| 2560 (H) *1440 (V)
Aspect Ratio| 16:9
Response Time(Typical)| 1ms (OD)
View Angles LR,UD(CR>10)| H 178°/ V 178°(Min)
Panel Surface| Anti-Glare
Display Colors| 8bit+FRC colors

PC Input Range

| Vertical Freq.| 165Hz
Max. display frequency

(Resolution H*V/Fv)

| 2560*1440 /165Hz

Interface

| Input 1| HDMI x 2
Input 2| DP x 1
Input 3| USB x 1
Output Terminal| Earphone| Earphone x 1
Speaker(Typic )| 2W*2(8Ω)
Projection screen| Wireless projection| NA
Wired projection| NA

Power

| Consumption(Typical)| Standby≤0.5W
PD POWER| 48W
Power Mode

Indicator Light

| RED/BLUE (LED)
Operating Condition| Temperature| 0℃ ～ 40℃
Humidity| 20% ~ 85%, non-condensing

Physical

| Dimension

(WDH)

| 614196461
Dimension (without base)

(WDH)

| 61470363
Packing Dimension

(WDH)

| 675185435
Net Weight| 5.8
Gross Weight| 7.2
Tilt| -15∘~30∘
VESA Mounting| YES(75mm)
Swivel| YES
Pivot| YES
Kensington Lock| YES

Accessory

| Adapter| 12V 4A
HDMI Cable| x 1（1.0M）
User Manual| YES
Color Plan| Black
Carton Box| Standard

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>