ENGLAON TV-M10 65 Inch 4K UHD Smart Outdoor TV User Manual
- June 13, 2024
- ENGLAON
Table of Contents
USER’S MANUAL
Smart Outdoor TV
Safety Information
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacture’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A
polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and at the point where they exit from the
apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart or rack is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-
over.
Unplug the apparatus during lightning storms or when unused for long periods
of time.
Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus has
been exposed to rain or moisture, does not operate normally, or has been
dropped.
CAUTION: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless you
are qualified to do so.
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping
or splashing and that objects filled with liquids, such as vases, shall not be
placed on apparatus.
WARNING: The mains plug is used as disconnect device, the disconnect device
shall remain readily operable.
|
CAUTION
|
---|---|---
RISK OF ELECTRIC SHOCK
DO NOT OPEN
– This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
– Warning: To reduce the risk of electric shock, do not remove cover (or back)
as there are no user-serviceable parts inside. Refer servicing to qualified
personnel.
– The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance instructions
in the literature accompanying the appliance.
Apparatus with class I construction shall be connected to a mains socket
outlet with a protective earthing connection.
TV Specification
1500cd/m²
43″
Screen size|
43″
---|---
Display Type|
TFT LED
Resolution|
3840 X 2160
Aspect Ratio|
16:9
Alimentation|
AC 100-240V 50/60Hz
Audio Output|
L/ R 40W X 2
Dimensions(With stand)|
996.8 x 584.4 x 93.5MM
55”
Screen size|
55″
---|---
Display Type|
TFT LED
Resolution|
3840 X 2160
Aspect Ratio|
16:9
Alimentation|
AC 100-240V 50/60Hz
Audio Output|
L/ R 40W X 2
Dimensions(With stand)|
1264.6 x 735.4 x 93.5MM
65”
Screen size|
65″
---|---
Display Type|
TFT LED
Resolution|
3840 X 2160
Aspect Ratio|
16:9
Alimentation|
AC 100-240V 50/60Hz
Audio Output|
L/ R 40W X 2
Dimensions(With stand)|
1502.9 x 879.9 x 131.6MM
Installation
Full Motion Cantilever Mount
For screen sizes: 40″-75″
Max capacity: 45.5kg/100lbs
VESA: 300×200 ~ 600x400mm
Tools required
a) Accessories
- (M4x25)-4pcs
- (M5x25)-4pcs
- (M6x25)-4pcs
- (M8x25)-4pcs
- (M10x60)-5pcs
- (M7x70)-5pcs
- (M15x8x10)-4pcs
- (M15x5x1.5)-4pcs
- (M8)-8pcs
- (M8x10)-8pcs
- (M6)-1 pcs
- (M10)-1pcs
- (M12)-1pcs
- Marked 5 locations on wall
- Marked 3 locations on studs
- Drill 5 holes at marked positions
- Drill 3 holes at marked positions
- Install 5 anchors into drilled holes, then install 5 hex lag screws through wall plate mounting holes and into anchors.
- Install 3 hex lag screws through wall plate mounting holes and into drilled holes.
a) Put TV assembly onto mount
- Cables management
- Trunking cover
- Wires or cables
- Tilt angles adjustment
Overview of back panel
1. WIFI
Connect for Wifi.
2. DVB-T2
Connected to external antenna to receive the ATV/DTV program in ATV/DTV mode.
3. DVB-S2
Connected to external SATELLITE to receive.
4. USB 1/2
Connect media stick for content.
5. CI SLOT
Use to insert the CI card.
6. HDMI3
Connect for HDMI.
7. HDMI2(ARC)
Connect for HDMI.
8. HDMI1(UART)
Connect for HDMI.
9. OPTICAL
Connect for OPTICAL.
10.RJ45
Ethernet connection.
11.AC 100-240V 50/60Hz
12.AUDIO OUT
Speaker terminals then connect to pair of passive speakers.
Accessories
Please make sure the following items are included with your LED TV.
If any items are missing, contact your dealer.
Remote Control
Owner’s Instructions
Battery (CR2032)
Mains lead
Remote Control Unit
No.
| Button| Description
---|---|---
1|
POWER
| Set your TV to power on or standby mode.
2
|
P.MODE
| Select the picture mode.
3
|
S.MODE
| Select the sound mode.
4
|
MUTE
| Press to mute the sound. Press again to regain sound.
5
|
QT
| Quick Tune. Quick TV Channel Autotune Button.
6
|
AUDIO
| Press to display the language of the audio in DTV.
7
|
ASPECT
| Press this button to select the aspect of screen.
8
|
HDMI
| Press this button to select the HDMI.
9
|
DISPLAY
| Press this button to display the information on current input.
10
|
SOURCE
| Press this button to display the input source.
11
|
MENU
| Allows you to navigate on the screen menus (OSD).
12
|
EXIT
| Exit from the current menu or sub-menu.
Press twice to enter HOME.
13
| 
| Allows you to navigate the on-screen menus and adjust the system
settings to your preference.
14
|
FAV
| Selects favorite channels.
15
|
EPG
| Press to display EPG (Electronic Program information).
16
|
TIME SHIFT
| Press to switch to TIME SHIFT mode.
17
|
REC.MENU
| Press to switch to REC.MENU immediately (DTV only).
18
|
CH+/-
| Press these two buttons to change channels up/down.
19
|
VOL+/-
| Press these two buttons to increase/decrease the volume.
20
|
0-9
| Press 0-9 to select a TV channel directly. The channel will change after 2 seconds. Applicable for enter page number in TELETEXT mode.
21
|
SLEEP
| Set the time for the TV to turn off automatically.
22
| | Return to the previously viewed program.
23
|
R (DELETE)
| Delete function button.
24
|
G (RENAME)
| Rename function button.
25
|
Y (MOVE)
| Move function button.
26
|
B (SKIP)
| Skip function button.
Open and close the mouse.
27
|
SUBTITLE
| Press to select the subtle language.
28
|
REVEAL
| Shows hidden words or pages by Teletext.
29
|
TEXT
| Switch on/off of Teletext window.
30
|
REC/
| Press to record the program immediately.
31
|
INDEX
| Returns to Index page by Teletext.
32
|
CANCEL
| Switches the Teletext window to the background; only the current page is not visible.
33
|
MIX
| Sets the transparency of Teletext window.
34
|
REPEAT
| DVD: Repeat mode selection.
35
|
SIZE
| Zoom In or Out of the Teletext window.
36
|
HOLD
| Holds on the current Teletext page.
37
|
SUBPAGE
| Displays a subpage of upper Teletext options.
Boot Wizard
The following language selection menu is displayed when the system is turned on for the first time.
Enter the country selection interface.
The following interface is displayed after country selection.
Choose “Connect” to set network.
Enter the password setting interface after network setting or choosing “Skip Network Settings”.
Enter the password input interface.
Enter the confirmation password interface. The user needs to enter the password again for confirmation.
Enter the TV mode selection interface.
Enter the search type selection interface.
Enter the channel scan selection interface.
Enter the search interface after choosing “Scan”.
The boot wizard is set up.
Enter the disclaimer interface, click accept to enter the TV interface.
If the TV mode is selected as home, you can enter the home interface after completing the wizard:
Otherwise, it will enter the play program interface:
Inputs
Press the [SOURCE] key to display the input source menu.
Press up/down key to select input source, then press OK button to enter.
Main Menu
Press the [MENU] key to display the main menu. The main menu is divided into three columns, channel bar, toolbar, and Record bar.
Channel bar
Program guide allows users to view program list information, including viewing
detailed information such as channel programs and filtering operations on
programs.
New channels Available for users to search for channels.
Tool bar
Channel settings
Click the Channel option to enter the channel interface, as shown below:
Channels
The Channels option mainly provides the user’s channel configuration and
channel program list information.
Channel Installation Mode
Antenna/Cable/Preferred Satellite/General Satellite Allows the user to select
a channel mode.
Auto Channel Update
On->Off.
Parental Controls
Allows users to encrypt some channels.
Audio Language
English/German/…Select the audio language.
Audio Language 2nd
English/German/…Select the second audio language.
Open Source Licenses
Press OK button display Licenses information.
Version
The version information.
Clicking on Channels will jump to the following interface:
Channel Scan
Press Ok button to scan channels.
Update Scan
Press Ok button to scan channels.
Analog Manual Scan
Tuning the Analogue channel by you.
Single RF Scan
Scan Single RF channels.(Digital Only).
LCN
Off/On/Default.
Channel Scan Type
All/Only Encrypted Channels/Only Free Channels.
Channel Store Type
All/Only Digital Channels/Only Radio Channels.
Channel Skip
The selected programme will be skipped in channel list.
Channel Swap
Swap the selected two programme sin channel list.
Channel Move
Move the selected programme in channel list.
Channel Edit
Edit the programme tuned.
Analog Channel Fine-tune
Clear Channel List
The channel list will be empty.
Clicking on Channel Scan will jump to the following interface:
Status
Scanning…/Scan Cancelled (press Exit button)/Scan Completed.
Analog Channels
Show the numbers of Analog Channels.
Digital Channels
Show the numbers of Digital Channels.
Clicking on Analog Manual Scan will jump to the following interface:
Start Frequency(MHZ)
Set the start frequency.
Scan up
Scan Frequency higher than the Start Frequency.
Stan Down
Scan Frequency lower than the Start Frequency.
Clicking on Parental Controls and inputting the correct PIN will jump to the following interface:
Channels Blocked
Block the selected programme. If select “Block All” will block all programmes.
Program Restrictions
Inputs Blocked
TV/Composite/HDMI1/HDMI2, Block the selected input source.
Change PIN
First enter the current PIN, then enter the new PIN, at last confirm your PIN.
Power
Clicking on Power will jump to the following interface:
Sleep Timer
Off/10Minutes/20Minutes/30Minutes/40Minutes/50Minutes/60Minutes/90Minutes/120Minutes,
Select the time you want TV close automatically.
Picture off
Press OK button picture will disappear, then press any key picture will
display again.
Switch off timer
Off/30Minutes/60Minutes/90Minutes/120Minutes/150Minutes/180Minutes/210Minutes/240Minutes.
No Signal Auto Power Off
Off/5Minutes/10Minutes/15Minutes/30Minutes/60Minutes, Select the time you want
TV close automatically when no signal.
Advanced Options
Clicking on Advanced Options will jump to the following interface:
Clicking on Subtitle will jump to the following interface:
Digital Subtitle Lang
English/French/…Select the subtitle language.
Digital Subtitle Lang.2nd
English/French/…Select the the second subtitle language.
Subtitle Type
Normal/Hearing Impaired Select Subtitle Type.
Clicking on Teletext will jump to the following interface:
Digital Teletext Language
English/French/…Select the Teletext language.
Decoding Page Language
WEST EUR/EAST EUR/…Select the the decoding page language.
TTX Presentation Level
Level 1.5.
Record bar
Record List
Look over and manage user’s burned file list.
Device Info
Look over device details.
Schedule List
Timetable list for viewing, adding and deleting users.
Time Shift Mode
Time shift switch, users need to turn on time shift mode to use time shift
function.
Settings
Click the settings icon on the home page and the settings page will appear, as shown below:
Network settings
Click the network & Internet option to enter the network settings page as shown below:
Accounts & sign in
Click the “Accounts & sign in” option will jump to the following interface: Users can set your account(add email address) and sign in.
Apps
Click the “Apps” option will jump to the following interface:
Device Preferences
Click the “Device Preferences” option will jump to the following interface:
FileManager
Click the usb icon in the upper right corner of the home page to enter the
file manager page.
As shown below:
Click the corresponding drive letter to view the contents of the file in the USB, and select the file to view or play. As shown below:
Photo
Click the picture to enter the picture playback interface as shown below, press the left and right keys to move the cursor, and perform different operations according to the prompts. The functions of the icons on the right side of the interface from top to bottom are: picture information, zoom out, zoom in, playlist.
Image Information
enlarge
Zoom out
Playlist
Rotate 90 degrees counterclockwise
Previous picture
Play or pause
Next picture
Rotate 90 degrees clockwise
Music
Click the music file to enter the music playback interface as shown below. Press the left and right keys to move the cursor and perform different operations according to the prompts.
Previous song
Rewind
Play or pause
Fast forward
Next song
Music Information
Set the time begin to play
Set the play mode: Random play/All cycle/List play once/Single cycle
Playlist
Movie
Click the video file to enter the video playback interface as shown below, press the left and right keys to move the cursor, and perform different operations according to the prompts.
Previous movie
Rewind
Play or pause
Fast forward
Next movie
Picture Setting
Video Information
Aspect Ratio: 4:3/16:9/Auto
Breakpoint play/Subtitle/Sound track setting
Segment repeat playback setting
Set the time begin to play
Set the play mode: Random play/All cycle/List play once/Single cycle
Playlist
Troubleshooting
Area
| Problem| No| Potential Cause| Solution
---|---|---|---|---
Power| No red standby light on TV| | Power supply not receiving/ giving power|
Check connection between power lead and PSU – green light should be visible on PSU
Standby light stuck on red
| | Remote not emitting signal| Try new battery in the remote
Standby light green; no picture| | Power supply not receiving/ giving power|
Check connection between power lead and PSU – green light should be solid on PSU
Signal/ Input| DTV – No signal| 1| Not tuned in with channels| Auto-tune using
DTV Auto-search in menu
2| Aerial problem|
Try TV on another aerial in different location – if picks up channels, likely an issue with the location of the bathroom aerial
DTV – Interference on screen
| | Caused by equipment around the the aerial| Move aerial to different
position away from any power cabling
HDMI – No signal| 1| No signal received from source|
Check connection on TV and source
2|
Source emitting 4K signal
| Scale down resolution from source to 1920×1080 (1080p)
USB – Media cannot be played| | File format not compatible|
Change file format and attempt to play
Wifi – no connection
| | Too far from router| Wifi extender
Smart screen not moving with buttons| | Stuck in mouse mode|
Press blue button on remote to toggle mouse mode off to use menu
Audio
| No sound – Speakers| 1| Mute| Try mute button on remote
2| Sound trying to route to external speakers|
Disconnect audio out/earphone port
No sound – external speakers
| | No signal between TV and external speakers|
Check audio connection at either end
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>