Alpha Antenna 2.1 HOA Buster User Guide

June 13, 2024
ALPHA ANTENNA

Alpha-Antenna-logo

Alpha Antenna 2.1 HOA Buster

Alpha-Antenna-2-1-HOA-Buster-product

Product Information

The HOA Buster Version 2.1 is an antenna designed to overcome the restrictions imposed on amateur ham radio operators by using existing metal gutters as an antenna. It allows external tuners to achieve a near-perfect match, enabling efficient signal transmission.

Product Usage Instructions

  1. Clip the jumper wire to your gutter.
  2. Extend the full length of the jumper wire so that it is not touching the ground.
  3. Clip the jumper wire to the Hex Nut on the bottom of the match.
  4. Attach your coax to the SO239 connector on the bottom of the Match and run the coax to your equipment.
    • Make sure the coax does not run parallel to the jumper wire.
  5. Place the included metal 10-inch stake into the ground with the included mount installed on the stake.

If you have any questions or need further assistance with your antenna, please feel free to email us at alphaantenna@gmail.com.

Introduction

This ‘HOA Buster’ antenna defeats the rules imposed upon amateur ham radio operators by using existing metal gutters as an antenna and enables external tuners to achieve a near-perfect match.

Product Overview

  • 1 Top of Mast Mount
  • 1 Ground rod
  • 1 Eight-foot jumper wire with clips
  • 1 Alpha Match with riser

Product Specifications

  • Frequency Coverage – 1.8MHz to 54MHz; the 1.8MHz band is dependent upon the length of the gutter being long enough.
  • Power – 250 PEP SSB, 125 CW, or 25 watts digital modes

Installation and Setup

  1. Clip the jumper wire to your gutter.
  2. Extend the full length of the jumper wire so that it is not touching the ground.
  3. Clip the jumper wire to the Hex Nut on the bottom of the match.
  4. Then attach your coax to the SO239 connector on the bottom of the Match and run the coax to your equipment.
    • a. Ensure the coax does not run parallel to the jumper wire.
  5. Place the included metal 10-inch stake into the ground with the included mount installed on the stake.Alpha-Antenna-2-1-HOA-Buster-fig-1

Support Contacts

If you have questions about your antenna, please feel free to email us at alphaantenna@gmail.com. HOA Buster Version 2.1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals