RANSHOU Bonsai Keyhole Saw 120mm Instruction Manual
- June 13, 2024
- RANSHOU
Table of Contents
RANSHOU Bonsai Keyhole Saw 120mm Instruction Manual
Product introduction
Since the blade width is narrow, it is convenient for hollowing out wood and
cutting curves.
It can also be used for bonsai pruning work.
Please read this manual carefully and use it properly.
CAUTION
- Wear safety goggles and gloves when working.
- Do not remodel or use it for anything other than its intended purpose.
- Do not use it for materials other than wood(plastic, concrete, metal, etc.).
- Check the product for rattling or damage before use.
- Do not point the cutting edge to people and animals.
- Applying excessive force or rough handling may cause damage to the product.
- Fix the object firmly and work.
- Make sure that no foreign objects such as nails or wires are stuck in the wood.
- Do not touch the cutting edge directly as with bare hands.
- Keep out of reach of children.
Parts introduction
- Product material
Blade: High carbon steel SK85
Handle: magnolia
How to use
-
You can cleanly cut thick branches that cannot be cut with scissors.
-
It can also be used for pruning bonsai.
-
How to cut out the board
The narrow width of the saw allows you to cut out wooden or drywall board.You can also cut the material into curves. -
Draw a marking line and make a hole over 6mm with a drill.
-
Insert the keyhole saw into the hole and cut along with the line.
Care and maintenance
- After use, wipe off any dirt on the product with a dry cloth. Then, apply the included blade oil to a dry cloth and wipe the blade.
- Keep the blade in a dry place as it is easy to rust.
Support
1-2-50 Suguecho,Sanjo City, Niigata Prefecture,Japan
E-mail: [email protected]
URL: https://www.sgsupport.jp/
MADE INJAPAN
Documents / Resources
|
RANSHOU Bonsai Keyhole Saw
120mm
[pdf] Instruction Manual
Bonsai Keyhole Saw 120mm, Bonsai, Keyhole Saw 120mm, Saw 120mm
---|---