Cruiser Head Fj60 Sun Visor Swivel Refresh Kit User Manual
- June 4, 2024
- Cruiser Head
Table of Contents
Cruiser Head Fj60 Sun Visor Swivel Refresh Kit
Includes
- x1 Plastic
- Mount, x1
- Internal locking star washer
INSTRUCTION STEPS
Step One
Remove the Sun Visor mount from your FJ60. Loosen screw ‘A’ then twist the
Bracket arm must be rotated as shown to align the shaft locking key with the
shaft sleeve. No excessive force should be needed to remove this piece. shaft
arm as shown In the picture below to slide out the shaft.
Step Two
Bend off the existing Internal tooth star washer from the shaft and remove
the shaft and spring from your original plastic swivel mount.
Step Three
Put assembly into a vise as shown, reusing the existing spring. DO NOT
OVER-TIGHTEN ASSEMBLY. Verify shaft rotational play in the new swivel mount as
you tighten the assembly. Overtightening this assembly will cause the swivel
mount or the internal locking star washer to break I used a socket to assist
in assembling the new swivel mount. DO NOT OVER TIGHTEN THE SPRING.
Step Four
Install visor into the truck.
For more FJ60 Products check out these links
https://forum.ih8mud.com/threads/fj60-part-reproductions-and- solutions.1234894/
References
- IH8MUD.com - Your Online Toyota Land Cruiser Offroad Resource
- Cruiser Head Parts for Toyota Land Cruisers
- Cruiser Head [15% off Everything Sale!] | IH8MUD Forum
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>