SYMA X220W Gps Drone with 4K HD Camera User Manual

: June 13, 2024
: SYMA

Table of Contents

SYMA X220W Gps Drone with 4K HD Camera
Product Information
Specifications
Package Contents
safety information
Repair and maintenance
Drone diagram
Flight guide
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SYMA X220W Gps Drone with 4K HD Camera

Product Information

The X220W GPS Drone is a high-performance drone designed for both beginners and experienced RC pilots. It is equipped with] advanced features such as GPS positioning, altitude hold, and real-time image transmission. With its durable construction and easy-to-use controls, the X220W GPS Drone offers an exciting and immersive flying experience.

Specifications

Drone Brand Name: SYMA
Model/ITEM NO. : X220W
Drone weight : N/A
Drone Size Range : N/A
Altitude Range : N/A
Image transmission range : N/A
Operating temperature : N/A
Video transmission frequency : N/A
Motor: N/A
Battery : N/A
Charging time : N/A

Package Contents

Drone
Remote control
USB charging cable
Clockwise/anticlockwise propellers
Propeller protectors
User manual

safety information

Thank you for purchasing this SYMA product. To ensure that you operate the drone correctly and conveniently, please read this manual carefully before operating, and keep this manual properly for future reference.

Safety Guide

Adult or experienced RC pilot’s supervision is recommended for children.
Rechargeable batteries are to be removed from the toy before being charged.
Batteries are to be inserted with the correct polarity.
Rechargeable batteries are only to be charged under adult supervision.
Non-rechargeable batteries should not be recharged; Batteries should be inserted with a correct polarity; Diﬀerent types of batteries, new or used batteries should not be mixing.
Turn oﬀ the drone/transmitter and remove the batteries when not in use.
The supply terminals are not be short-circuited.
Keep away from the rotating blades (rotating blades may cause bodily injuries, or damage to property).
Attention ：please assemble the drone with the guidance of adults.
Do not look directly into the LED lights of the drone as it can damage your eyes.
Exhausted batteries are to be removed from the drone.
Please store the smaller-sized drone accessories in places that are out of reach of children.
This drone is very powerful. For all ﬁrst-time ﬂights, the left joystick must be slowly pushed up in order to prevent the drone from ascending too fast to avoid unnecessary collision and possible damage and injury.
When the ﬂight is ended, ﬁrst turn oﬀ the power of the remote control. Then turn oﬀ the power of the drone.
Avoid placing the batteries in places with high temperatures and exposure to heat.
Please keep a safe distance from the spinning propellers to avoid injury.
To ensure the electromagnetic environment requirement of the aviation radio (station), using remote controls in the zone, which is in a radius of about 5000m zone from the circle center of the airport runway, is forbidden. All users also should abide by the regulation of the radio set forth by government and regulatory agencies including the duration and area.
Pay attention to keeping distance of 2-3 meters from the user or other people when the drone is ﬂying, avoid the drone landin to hit the head, face or face or body of anoter person.
Attention ： Drone assembly under adult supervision.
The packing has to be kept since it contains important information.

Repair and maintenance

Use clean and soft cloth to clean the product.
Keep away the product from heat sources.
Avoid water exposure to this product. Moisture may cause damages of drone electronic parts.
Transformers used with the drone should be examined regularly, such as propel blade, motor, battery and other parts. In case of any damages is found, please stop using it unless it is repaired or replaced.

About this product
Speciﬁcations

Drone
Drone weight Approx. 190g(Not included propeller protector)
Drone Size 36030070mm(Install propeller protector)
Brand Name SYMA
Model/ITEM NO. X220W
Range 350m
Altitude 100m
Image transmission range 300m
Operating temperature 0°C to 40°C
Video transmission frequency 5 G
Motor 8520
Battery 7.6V 1300mAh
Charging time Approx. 150 minutes
Flight time Hovers indoors for more than 16-18 minutes
Parameter of shooting
Operating Frequency 5 GHz
Photo Resolution 3840*2160(stored on mobile phone)
Video Resolution 2048*1080(stored on mobile phone)
Lens FOV 62°
Max Transmission Distance 984 feet/300m(outdoor and unobstructed)
FPV Real-time Transmission 720p@25fps
Photo Formats JPEG
Video Formats MP4
Whether to support memory card Not support
Controllable range 90°up and down
Remote control
Operating Frequency 2.4 GHz
Range 300m
Operating temperature 0°C to 40°C
Remote control battery 4*1.5V “AAA” (Not included)
Package contents
Drone 1
Remote control 1
User manual 1

Install the SYMA Air app

Scan the QR code with your mobile device or download the app from your app store.

*Note
** For best results, use a device with iOS 8.0/Android 5.0 or later

Drone diagram

Remote control diagram

Assembling the product

Clockwise propellers

Anticlockwise propellers

Note

Attach the propellers as shown in the diagrams above. Ensure that they are attached in the correct orientation.
Ensure that the clockwise and anticlockwise propellers are attached to the correct arms. The drone will not ﬂy correctly if the propellers are attached in the wrong position.
The propellers are made from delicate material. Pay attention when attaching them to the drone.
Only use propellers that are supplied by the SYMA.
The propellers are consumable parts. If necessary, purchase replacements from the manufacturer .

Installing the propeller protectors

Charging the drone battery

Remove the battery

Insert the battery

Note

Ensure that the battery holder clicks into place.

When charging: t he battery green indicator ﬂashes slowly.
When fully charged: the battery green indicator light is always on.
Abnormal charging: the battery indicator ﬂashes quickly.

Note

The toy is only to be connected to equipment bearing either of the following symbols:
Charge the drone with the USB charging cable that came with the product.
The battery will take longer to charge when you use an adapter with a smaller rated current.

Note

Do not short circuit or compress the battery, as this may cause an explosion.
- Do not disassemble the battery or store it in a hot environment.
- If you do not plan to use the drone for at least 10 days, discharge the battery to 40%-50%.
This helps to prolong the lifespan of the battery.
- Rechargeable batteries should be removed from the drone before charging.
- Rechargeable batteries should only be charged under the supervision of adults. And keep away from flammable materials.
- Caution: Risk of explosion if the battery is replaced with incorrect ones, please install the batteries according to the instructions.
- Failure to follow all the instructions may result in serious injury, irreparable damage to the battery, and may cause a fire, smoke, or explosion.
- Always check the battery’s condition before charging or using it. Replace the battery if it has been dropped, or in case of odor, overheating, discoloration, deformation, or leakage.
- Use only the supplied charging cable.
- The battery temperature must never exceed 60℃(140°F) otherwise the battery could be damaged or ignite.
- Never charge on a flammable surface, near flammable products, or inside a vehicle ( preferably place the battery in a non-flammable and non-conductive container)

Preparing the remote control

Remote control battery installation

Note

- When installing the batteries, ensure that you match the + and ‒ ends of the battery with the + and ‒ signs on the controller.
- During the battery installation, it must be ensured that the polarities of the batteries are matched with that of the battery box. No battery shall be installed with the opposite polarity.
- Please do not use new and old batteries together.
- Please do not use different types of batteries together.
- Do not use rechargeable batteries.

Flight guide

Pairing the remote control with the drone
Switch on the remote control Indicator lights ﬂashes rapidly to slowly

Remote control indicator lights flashes rapidly
Indicator lights stays constant when pairing is complete.

Note

When you switch on the remote control, the indicator light will ﬂash rapidly for approximately 20 seconds to indicate that the remote control is waiting for a signal. The indicator will then ﬂash slowly to indicate that the pairing mode has been disabled.

Calibrating the compass

Press to calibrating the compass
Hold the drone horizontally and rotate 360 degrees a few times. Indicator lights flashes from slowly to rapidly
Hold the drone vertically and rotate 360 degrees a few times. Indicator lights flashes from rapidly to constant

Note

- Do not calibrate the compass near strong electromagnetic ﬁelds or large pieces of metal, car parks or buildings with underground steel reinforcements.
- When holding the drone horizontally, the angle of inclination must not exceed 30 degrees.

Searching for satellites (No need to search for satellites for indoor ﬂight)

- The rear indicator light will change from orange to green when the drone has locked onto a satellite and recorded the take-oﬀ location. The drone is now ready to ﬂy.
- It should take approximately one minute for the drone to lock onto a satellite. If the drone fails to ﬁnd a satellite, recalibrate the compass.
- Before take-oﬀ, place the drone in an open space away from obstacles and ensure that GPS mode is enabled.
- When the rear green indicator light ﬂashes rapidly, this indicates that the GPS signal is weak. If this occurs, land the drone manually and restart the satellite search.

Turning the drone on

Move the left joystick upward

Push the left and right joysticks downward in a V shape for 1 second.

Turning the drone oﬀ

Method one
Push the left joystick downward for 2-3 seconds.

Method two
Push the left and righ joysticks downward in a V shape for 2 seconds

Method three
Press the take-off/landing button to make the drone land automatically and switch off.

Using the remote controller

Optical flow positioning

Front indicator is constant white, rear indicator is constant yellow.

Note

*If the rear indicator starts to flash rapidly, this indicates that the optical signal is weak and the drone cannot determine its position.
- Performance may be impaired in dark surroundings, areas with reflective surfaces (e.g. water), or at altitudes of more than 6 m.
- Optical flow positioning only supports altitudes of less than 6 m.

GPS mode

Front indicator is constant white, rear indicator is constant green.

Note

- When the battery level is normal, the drone can fly to a distance of 350 m at a maximum altitude of 100 m.
- When the battery level is low, the drone can fly to a distance of 20 m at a maximum altitude of 20 m.
- If the rear indicator starts to flash rapidly, this indicates that the GPS signal is weak and the drone cannot determine its position.
- GPS mode cannot be used indoors.

Headless mode
The indicator on the drone will flash once every 4 seconds.

Configuring the forward direction
When you switch on the drone for the first time, the direction in which the front side of the drone is pointing will be set as the forwards direction

Enabling headless mode

After pairing the remote control with the drone, hold down the right joystick for approximately 3 seconds. The remote control will beep 8 times to indicate that headless mode is enabled. To disable headless mode, hold down the right joystick again for approximately 3 seconds.
In headless mode, you do not need to determine the drone orientation. You can move the joysticks on the remote control to make the drone move in the corresponding direction

Flight control
Level calibration

Place the drone on a level surface and move the left and right joysticks to the lower right corner for approximately 3 seconds. The indicator will flash rapidly and then stay constant to indicate that the calibration process is complete.

The drone cannot be calibrated if the angle of inclination is greater than 10 degrees.

High/low speed mode
Place the drone on a level surface and move the left and right joysticks to the lower right corner for approximately 3 seconds. The indicator will flash rapidly and then stay constant to indicate that the calibration process is complete.

The drone cannot be calibrated if the angle of inclination is greater than 10 degrees.

Briefly press the right joystick to switch between high and low speed mode.

Low speed mode is enabled by default when the drone is switched
The remote control beeps twice when high speed mode is enabled and once when low speed mode is enabled.

One-Key take-oﬀ/landing

When the drone is under standby mode, Press the take-oﬀ/landing button to make the drone take oﬀ automatically and hover at a height of 1.5 m.
When the drone is under the active mode, it will automatically land on the ground if you press the one key landing

Remote control photo and video functions

Take a photo : Press the photo button. The indicator on the drone will ﬂash to indicate that a photo is taken.
Record video : Press the record button. The indicator on the drone will ﬂash twice to indicate that recording is in progress. Press the record button again to end the recording. The indicator on the drone will turn on to indicate that recording is complete.
Camera angle adjustment

Return to home function
In GPS mode (when the indicator light is constant), hold the return to home, button so the drone will return to its take-oﬀ position automatically. During the return ﬂight, you can use the joystick to control the drone ascend, descend and move left/right in order to avoid obstacles. To terminate the return ﬂight, hold the return to home button.

If the drone is ﬂying at an altitude less than 20 m, it will automatically ascend to an altitude of 20 m before returning home.
If the drone is ﬂying at an altitude more than 20 m, it will return home at the same altitude.

Failsafe return to home
If the remote control signal is lost for more than 20 seconds, the drone will automatically return to the take-oﬀ position. If the signal is restored during the return ﬂight, you can hold the return to home button to terminate the return ﬂight.

The drone cannot automatically avoid obstacles during the return ﬂight.
· The automatic return to home function is not available when the GPS signal is weak (ﬂashing indicator light).
If the drone does not receive a GPS signal and lost contact with the remote control for more than 20 seconds, it will not be able to return to home but will land automatically.

Low-battery return to home
When the drone battery is low, the drone will automatically return to the take-oﬀ position. During the return ﬂight, you can use the joystick to control the drone to ascend, descend and move left/right in order to avoid obstacles.

I f the drone is further than 20 m from the landing position, the return ﬂight cannot be terminated.
I f the drone is less than 20 m from the landing position, the return ﬂight can be terminated. Landing position: The initial unlock/take-oﬀ position.

Smart app features

Before using the smart app features, watch the video tutorial in the SYMA AIR app or on the SYMA website.
Ensure that you pre-conﬁgure the ﬂight altitude and distance in the SYMA AIR app.

Drone status and maintenance

Troubleshooting

Accessories(available separately)
The following section contains a list of optional accessories that are available to purchase. Accessories can be purchased from your local retailer. Please indicate your preferred colour when making your purchase.

Warning : Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Notice.
Any Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

“This device complies with FCC radiation exposure limits set forth for general population (uncontrolled exposure). This device must not be collocated or operating in conjunction with any other antenna or transmitter.”

RF frequency band : 2408-2478MHz
Transmitter power : 10dBm(Max.)
Product Name : (DRONE)

ecoration of Conformity Inserts : Hereby, Gudang Dong SYMA Model Aircraft Industrial Co., Ltd. declares that the radio equipment type helicopter is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.symatoys.com/down/declaration-of-conformity.html

WARRANTY
LIMITED 2-YEAR WARRANTY AND FREE LIMITED REPLACEMENT PARTS FOR 2-YEARS

Symatoys.com.cn warrants to the original buyer only that its products will be free from defects in material and workmanship for 2 years from the date upon which the product is shipped, either directly from symatoys.com.cn or from an Authorized Re-seller’s location, to the buyer.
The following condition’s must to be eligible for warranty coverage:

During the warranty period product is used as intended by the manufacturer.
The Product has not been disassembled or modified.
The labels and serial numbers show no signs of tampering or altering.
Buyer has a warranty code obtained by registering their product online prior to making a claim.

EXCEPTIONS: THE LIMITED WARRANTY SHALL NOT APPLY TO

Damage caused by normal wear and tear
Accident, negligence, abuse, misuse, misapplication or willful damage by buyer (or its agents), or acts of nature
Crash or burning caused by non-manufacturing factors
Damage caused by authorized modification or disassembly not authorized by the instruction manual
Damage. caused by incorrect use or operation
Damage caused by mismatch or misuse of battery or charger
Failure of the operator to follow the operating instruction or use outside the products operating parameters
Damage caused by operating the product in or around electromagnetic interference (i.e., radio transmitting tower, high-voltage wire, substation, etc.)
Damage caused by operating the product where there may be interference caused by other wireless devices
Operating the product with load capacity in excess of the sale weight listed in the manual
Operating the product with aged, damaged or unauthenticated third-party components
Operating the product with a defective battery

WAR RANTY
PROCEDURE : Any claims for breach of the foregoing limited warranty shall only be valid if buyer makes such claim in writing within 2 year of the date of shipment of the product to which the claim. To make a warranty claim, please email at: warranty@symatoys.com.cn with your full name. address. phone number, order number. vehicle type. part type and purchase date and product issue.

LIMITED REMEDY
liability, and buyer’s sole remedy for any breach of the foregoing warranty shall be at option to exchange the product with a new product or a refurbished product that is functionally equivalent to the original product, or issue a credit or refund to the purchase price the product.

Any replaced products shall be warranted as set forth herein, provided that the period within which buyer may make further claims shall be limited to the remainder of the original period.
for the applicable product or 2 years, whichever is longer (although the warranty period shall be suspended during any period of replacement)

DISCLAIMER
THE WARRANTY AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES.

AND Symatyos.com.cn DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, NON-INFRINGEMENT AND ANY WARRANTIES ARISING OUT OF COURSE OF DEALING, COURSE OF PERFORMANCE AND TRADE USAGE.

Symatoys.com.cn IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY

OTHER LEGAL THEORY. INCLUDING BUT NOT UMITED TO COSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS);
LOSS OF THE USE OF MONEY, LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS COSS OF OPPORTUNITY; LOSS OF GOODWILL, LOSS OF EPUTATION; LOSS OF DAMAGE TO COMPROMISE OR

CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY. ANY COSTS OF RECOVERING OR REPRODUCING ANY DATA STORED IN OR USED WITH THE PRODUCT OR ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF INFORMATION STORED THE PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential damages.so the above limitation or exclusion may not apply to you. In addition, some states do not
allow limitations on how long an implied warranty lasts. so the above limitation may not apply to you.

FREE REPLACEMENT PARTS FOR 2 YEARS: Symatoys.com.cn .com shall also make available any spare part needed for registered vehicles free of charge for 2 years from the date of purchase, with the exception of batteries, motors. circuit boards and transmitters. Shipping charges may apply Limit one part type request per registered vehicle (e.g., registrants are
entitled to one extra set of batteries per registered vehicle}. To request spare parts. please email at: warranty@symatoys.com with your warranty code, vehicle name/model, current shipping address, purchase date and part type

GET YOUR WARRANTY CODE AT symatoys.com.cn/pages/warranty-signup HAVE YOUR ORDER NUMBER AND/OR VEHICLE UPC READ

European Representative

CET PRODUCT SERVICE LTD.
Osterholzallee 144
71636 Ludwigsburg Germany
Phone ：+4971416432236
E-mai l：info.cetservice@gmail.com
British Representative
E-mail:amz@symatoys.com

Manufacturer : GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO.,LTD
Address : NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI , Shantou, China Postal Code: 515800

The company has the right of ﬁnal interpretation of this user manual.