Betonmischer 120 Liter Pattfield Concrete Mixer Instructions
- June 13, 2024
- Pattfield
Table of Contents
- Betonmischer 120 Liter Pattfield Concrete Mixer
- Product Information
- Product Usage Instructions
- Scope of delivery
- Safety instructions
- Symbols
- Assembly
- Operation
- Care & Maintenance
- Transport/Storage
- Technical Data
- Troubleshooting
- Declaration of conformity
- Disposal
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Betonmischer 120 Liter Pattfield Concrete Mixer
Product Information
The product is a concrete mixer manufactured by Pattfield. It is available in four different sizes: 120 liters, 140 liters, 160 liters, and 180 liters. The mixer is designed for mixing concrete and comes with various fastening parts such as screws, washers, pins, etc. These parts are divided into specially numbered plastic bags (1-7) for easy identification during the assembly process.
Product Usage Instructions
- Before using the machine, read and understand the operating instructions provided in the manual.
- Ensure that all safety precautions mentioned in the maintenance and care manuals are followed.
- For operation, make sure to wear appropriate clothing and protective gloves.
- Keep the machine away from children.
- Check the voltage requirements of the machine and ensure that it matches the specified values mentioned in the technical data section.
- If any defects or issues occur during operation, consult the troubleshooting section of the manual for possible solutions.
- For maintenance and regular care, refer to the maintenance and care manual for detailed instructions.
- During transport or storage, take necessary precautions to ensure the machine’s safety.
- Dispose of the product according to local regulations and guidelines.
Please note that these instructions are a general overview. For more detailed and specific instructions, refer to the provided user manual.
Thank you!
We are convinced that this tool will exceed your expectations and wish you joy
while using it. Read and understand the operating instructions before using
the machine. Abide by all the safety measures stated in the service manual.
Act responsibly toward third parties. In case of any doubts about connection
and operation refer please to our customer center.
Scope of delivery
Please observe the foldout pages to get the overview.
- The concrete mixer can only be used after the complete installation of all parts.
- Check the content of the packing and inform your HORNBACH store in case of any defects.
- The screws, washers, pins, and other fastening parts are reported into specially numbered plastic bags 1-7, which are specified in every step of the assembly instructions.
Safety instructions
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future reference.
WORK AREA SAFETY
- Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate machines in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Ma-chines create sparks that may ignite the dust or fumes.
- Keep children and bystanders away while operating the machine. Distractions can cause you to lose control.
ELECTRICAL SAFETY
- Do not use any provisional electric appliances. Machine plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) machines. Unmodi-fied plugs and matching outlets will reduce the risk of electric shock.
- Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose machines to rain or wet conditions. Water entering a machine will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the machine. Keep the cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
- When operating a machine outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
- Always use a residual current device (RCD) protected supply. The use of an RCD reduces the risk of electric shock. Before use, always check your RCD for function.
- Use extension cables that are intended for outdoor use and are protected against splashes of water. Extension cables up to 25 m need to have a cross-section area of at least 1.5 mm2. Risk of electric shock. Make sure they do not get jammed, or broken and the plug is not wet.
PERSONAL SAFETY
- Stay alert, watch what you are doing, and use common sense when operating a machine. Do not use a machine while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating machines may result in serious personal injury.
- Do not touch, inhale (dust development), or consume the cement or additive. Wear personal protective equipment. Protective equipment such as dust masks, non-skid safety shoes, eye protection and hearing protection used for appropriate conditions will reduce personal injuries.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source or relocating the machine. Running machines invite accidents.
- Remove any adjusting key or wrench before turning the machine on. A wrench or a key left attached to a rotating part of the machine may result in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations.
- Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
- Keep adequate safety distance from the machine. Don‘t touch the running mixer drum. There is a risk of getting caught and injured.
MACHINE USE AND CARE
- Do not use the machine if the switches do not turn it on and off. Any machine that cannot be controlled with the switches is dangerous and must be repaired.
- Disconnect the plug from the power source before:
- relocation and transport
- cleaning, checking, and maintenance
- failure removal
- Leaving (even in case of short interruption) storing.
- Such preventive safety measures reduce the risk of starting the machine accidentally.
- Store idle machines out of the reach of children and do not allow persons unfamiliar with the machine or these instructions to operate the machine. Machines are dangerous in the hands of untrained users.
- Maintain machines. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the machine’s operation. If damaged, have the machine repaired before use. Many accidents are caused by poorly maintained machines.
- Never operate a machine with missing, defective, or damaged parts, labels, or cables. Have defective machines been repaired immediately? Properly maintained ma-chines reduce the risk of injury.
- Use the machine in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the machine for operations different from those intended could result in a hazardous situation.
- Do not modify the machine or any of its parts. Many accidents are caused by manipulated machines.
SERVICE
- Have your machine serviced by a recognized workshop using only identical replacement parts. This will ensure that the safety of the machine is maintained.
MACHINE SPECIFIC SAFETY WARNINGS
- Do not operate the mixer unattended. as this may lead to accidents.
- Only fill and empty the mixer drum when the motor is running. to avoid damage to the machine.
- Do not change the motor speed. Excessive speed may damage the motor and all rotating parts.
- Move the concrete mixer only by manual movement. Falling Injury.
- Keep any equipment not being used in dry, frost-free, and locked locations. Damage to the machine injury.
- The machine shall not be operating when it is being moved.
- Position the mixer on level and stable ground. Unstable machines may tip over and cause injury and damage.
- Risk of trapping/entanglement! Do not reach into the drum interior to the rotating blades.
- Use only the original standard of insulation material for repair and maintenance of insulation distances.
- Disconnect the mixer from the power supply before opening the enclosure and do not operate it unless the enclosure is fully closed.
- Warning! Hazard of inhalation of fumes.
Symbols
Assembly
Operation
Fill and empty the mixer drum only when the motor is running. Check the mixer for stability. The full mixer drum is heavy – be careful when emptying the drum.
Mixture production
-
Add water and a couple of additive shovels like sand (1), gravel (2), etc. (see page VIII).
-
Add a couple of binder shovels (cement, lime, etc.).
-
Repeat points 1 and 2 until the required mixture ratio is achieved.
-
Let the mixture mix up properly.
See the right positioning of the drum:- Choose position I on the adjusting plate for mortar
- Choose position II on the adjusting plate for concrete
Intended Use
The concrete mixer has been designed to be used only outdoors and exclusively
for concrete and mortar production by persons over 16 years of age. Any other
use or modification to the machine not described in this manual, especially
working with flammable and explosive material or employment in food processing,
is considered as improper use and could cause considerable dangers. Improper
use will void any warranty claim.
Care & Maintenance
Before carrying out any work on the machine, disconnect the plug from the power supply.
-
Prior to every use, visually check the machine to rule out any defects, in particular on the power cable and the plug.
-
Never operate a damaged machine. Have it repaired immediately by a recognized workshop using only original spare parts.
-
Never clean the machine and its components with solvents, flammable, or toxic liquids. Lubricate regularly all moving metal parts with oil (e.g. wheels and rotary equipment).
Never lubricate the gear ring! -
Only a regularly maintained and treated ma-chine can serve as a satisfactory aid. Insuf-ficient maintenance and care can lead to unforeseen accidents and injuries.
Caution!
If the supply cord is damaged, it must be replaced by a recognized workshop in
order to avoid hazards.
Transport/Storage
Before any transport, disconnect the plug from the power supply.
Turn the opening of the mixing drum downwards when transporting or before
storing. Before longer periods of storing, lubricate the rotary equipment with
an environmentally friendly spraying oil.
Technical Data
Betonmischer
**120 Liter Pattfield**
| Betonmischer
140 Liter Pattfield ****
| Betonmischer
160 Liter Pattfield ****
| Betonmischer 180 Liter Pattfield
---|---|---|---
Art. No **| 10452084| 10450905/10450906| 10450907| 10450908
Nominal voltage **| 230 V~ 50 Hz| 230 V~ 50 Hz| 230 V~ 50 Hz| 230
V~ 50 Hz
Motor output **| 550 W/P1| 550 W/P1| 650 W/P1| 650 W/P1
Protection class **| II (reinforced isolation)| II (reinforced
isolation)| II (reinforced isolation)| II (reinforced isolation)
Degree of protection **| IP44| IP44| IP44| IP44
Max. motor speed **| 2800 min-1| 2800 min-1| 2800 min-1| 2800
min-1
Drum capacity **| 120 l| 140 l| 160 l| 180 l
Mixer drum speed **| 26 min-1| 26 min-1| 26 min-1| 26 min-1
Drum arrest **| 20-fold| 18-fold| 20-fold| 20-fold
Ø- Handwheel **| 520 mm| 520 mm| 520 mm| 520 mm
Weight **| 46 kg| 50.5 kg| 53.5 kg| 55.5 kg
Measured sound power level (L WA) **Uncertainty ****| 95 dB (A),
K= 3 dB(A)
| 95 dB (A),
K= 3 dB(A)
| 95 dB (A),
K= 3 dB(A)
| 95 dB (A),
K= 3 dB(A)
Sound power level (Guaranteed) **| 98 dB (A)| 98 dB (A)|
98 dB (A)| 98 dB (A)
Sound pressure level (L pA)**
Uncertainty ****
| 71 dB(A),
K= 3 dB(A)
| 71 dB(A),
K= 3 dB(A)
| 71 dB(A),
K= 3 dB(A)
| 71 dB(A),
K= 3 dB(A)
Operating temperature ****| 0° – 40° C| 0° – 40° C| 0° – 40° C| 0° – 40° C
The product contains the following substance in the current list of candidates, in accordance with article 59(1) of Regulation (EC) No 1907/2006 (REACH), in a concentration of more than 0.1% by mass: Lead (CAS No.: 7439-92-1).
Noise
- The values given in these instructions have been measured in accordance with a standardized measurement procedure specified in 2000/14/EC and can be used to compare machines.
- It may be used for a preliminary assessment of exposure.
- Local regulations may restrict the operating times.
Troubleshooting
Problem **** | Possible cause **** | Solution **** |
---|---|---|
The motor does not run | No power supply | Make sure the voltage meets the |
requirements stated in the technical data
Defective cable| Deliver the machine to a recognized workshop for repairing
The motor is growling, running but not starting| The gear ring is blocked|
Clean the ring gear
Defective condenser| Deliver the machine to a recognized workshop for
repairing
Mixer gets blocked by small loads, switches off automatically| The extension
cable does not meet the requirements| Required cross-section area for
extension cables:
- 1.5 mm2 – up to 25 m
- 2.5 mm2 – longer cables
The contact pressure on the hand wheel is too loose| The pressure spring is
not sufficiently tight| Tighten the screw (page IX)
The drum is not rotating after starting| Defective V-Belt or mismatching
voltage| Make sure the voltage meets the requirements stated in the technical
data Deliver the machine to a recognized workshop for changing the V-Belt
Declaration of conformity
We declare, that the product described in Technical Data:
- 10452084 Betonmischer 120 Liter Pattfield
- 10450905/10450906 Betonmischer 140 Liter Pattfield
- 10450907 Betonmischer 160 Liter Pattfield
- 10450908 Betonmischer 180 Liter Pattfield
manufactured for:
HORNBACH Baumarkt AG
Hornbachstraße 11 76879 Bornheim/Germany.
is in conformity with the following directives:
- Machinery Directive 2006/42/EC
- Outdoor Directive 2000/14/EC
- EMC Directive 2014/30/EU
- RoHS Directive 2011/65/EU
and in accordance to the following applicable harmonized standards:
- EN 12151:2007
- EN 60204-1:2018
- EN 55014-1:2017/A11:2020
- EN 55014-2:2015
- EN IEC 61000-3-2:2019
- EN 61000-3-3:2013/A1:2019
The conformity with the Noise Emission of Outdoor Equipment Directive is verified by the conformity assessment procedure according to Annex VI, and the Directive 2005/88/EC.
- Measured sound power level: 95 dB(A)
- Guaranteed sound power level: 98 dB(A)
Andreas Back
Head of Quality Management, Environment & CSR Person authorized to compile the
technical file Bornheim, 10.05.2021
HORNBACH Baumarkt AG
Hornbachstraße 11 76879 Bornheim/Germany.
Disposal
The crossed-out wheeled bin symbol requires separate disposal for waste electrical and electronic equipment (WEEE). Such equipment may contain valuable, but dangerous and hazardous substances. You are required by law to return these products to a designated collection point for the recycling of WEEE and must not under any circumstances dispose of them as unsorted municipal waste. In this way, you can help to conserve resources and protect the environment.
In Germany, HORNBACH is obliged:
- to take back old appliances of the same type free of charge in HORNBACH stores when you purchase a new electrical or electronic appliance.
- to take back up to 3 WEEE of the same type (up to max. 25 cm edge length) free of charge in HORNBACH stores, even if you do not purchase a new appliance.
- when delivering a new electrical or electronic appliance to a private household, to collect an old appliance of the same type free of charge, or to enable you to return it in your immediate vicinity.
For further details, please consult www.hornbach.com or your local authorities. Children must not play with plastic bags and packaging material, due to the risk of injury and suffocation. Store such material safely or dispose of it in an environmentally friendly way.