SEEBURG DT1 Digital Electronic Consolette Instructions
- June 13, 2024
- SEEBURG
Table of Contents
SEEBURG “Digital Electronic Consolette” 2-WIRE TRANSLATOR
DT1 Digital Electronic Consolette
*WALLBOX SPEAKERS
The Audio Ground, Right and Left terminals connect to the wallbox speakers through the Soft/Loud “Volume Control Switches”.
OPERATING MODE
Factory shipped in “Adapter Mode” to allow the direct connection to a Wallbox
Adapter player system.
If connecting to a jukebox stepper, move the red W1 jumper to the two lower
pins as shown above.
FREE PLAY
To allow Free Play operation, pull out the “Seeburg Programmer” board from the
Digital Transmitter and Pricing Unit (Black Box).
CAUTION: Do not attempt to hook up a wallbox power supply if you are not
familiar with electrical wiring, consult with a qualified person or an
electrician.
Do not leave any wires exposed, always use wire-nuts or electrical tape on all
connections. Improper wiring can result in a fire or shock hazard.
DEC wallboxes can be daisy-chained together, but as a general rule, each group
of four wallboxes should be powered from a separate 24VAC 2-Amp power supply.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>