SEEBURG A 6 Integrated Digital Amplifier Instructions
- July 4, 2024
- SEEBURG
Table of Contents
SEEBURG A 6 Integrated Digital Amplifier Instructions
Architectural Specifications
SEEBURG A 6
12” / 1” system for high quality music and speech reproduction with a
usable range from 60 Hz to 20 kHz. The multi-functional enclosure allows
horizontal or vertical installation, and use as a floor monitor.
The 1” (DPC = dual pattern circular) horn is 240 mm in diameter and and 210 mm
long, and can be rotated by 90°. The horn can provide two different coverage
patterns. This horn geometry combines the advantages of a
CD horn with those of a spherical wave radiator. Increased volume in the
enclosure behind the horn membrane allows a lower cross-over frequency.
The 12” LF driver has a neodymium magnet and a coated membrane. The dimensions
of the 160 cm² bass-reflex tunnel prevent compression effects at maximum
power.
The loudspeaker features an integrated passive cross-over with phase
compensation, and can also be used without the dedicated controller.
High directivity and the maximum level of 131 dB make the system particularly
suitable for middle distances.
Two M10 and seven M8 mounting points in the enclosure allow safe and simple
flying of the system, horizontally or vertically, in combination with the
range of original accessory fittings. The enclosure features a 35 mm speaker
stand socket on the lower side.
Compact dimensions of 60.6 x 36 x 34 cm (h x w x d) and low weight (17 kg).
The enclosure is constructed from 15 mm birch 11-ply, splash-proofed (IP44),
Polyurea coated, RAL 9005 (other RAL colours available on special order).
Front grille meets DIN 18032-3 (ball proof) and is more that 65% acoustically
transparent, replaceable acoustic foam front.
Simulation data available for Ease and Ulysses. A comprehensive range of
accessories is available.
Product-Specifications:
Speaker Components 12“ Neodym VC = 76 mm, 1“ Neodym driver VC = 44 mm
Description ** Multi Purpose Sound System
Power (AES / Peak) 500
W / 1500 W
Impedance (nominal) 8 Ohm
Maximum Level 131 dB
Usable Range 60 Hz – 20 kHz (- 6 dB)
Coverage (horizontal / vertical) 90° / 60°
(rotatable)
Connectors ** 2 x Speakon NL4MP in/out
Rigging / Fittings 2 x M10, 7 x M8, 35 mm pole mount
Weight ** 17 kg
Size** (height x width x depth) 60,6 x
36,0 x 34,0 cm
Architectural Specifications
SEEBURG A 6 dp 12” / 1” system for high quality music and speech
reproduction with a usable range from 50 Hz to 20 kHz.
The integrated digital amplifier electronics are based on Class D power
amplifiers with a high efficiency, which are controlled via a particularly
low-noise FPGA DSP processing. An electronic transformer balancing ensures an
interference- free signal feed. Various factory-configured presets and volume
settings can be called up. Remote monitoring and control is carried out via
the Ethernet interface using SEEBURG Network Manager. Signal transmission
(AoE) in accordance with the AES 67 standard is also possible.
The multi-functional enclosure allows horizontal or vertical installation, and
use as a floor monitor. The 1” (DPC = dual pattern circular) horn is 240 mm in
diameter and and 210 mm long, and can be rotated by 90°. The horn can provide
two different coverage patterns. This horn geometry combines the advantages of
a CD horn with those of a spherical wave radiator. Increased volume in the
enclosure behind the HF driver membrane allows a lower cross-over frequency.
The 12” LF driver has a neodymium magnet and a coated membrane. The dimensions
of the 160 cm² bass-reflex tunnel prevent compression effects at maximum
power. The loudspeaker features an integrated passive cross-over with phase
compen- sation, and can also be used without the dedicated controller. High
directivity and the maximum level of 128 dB make the system particularly
suitable for middle distances.
Two M10 and seven M8 mounting points in the enclosure allow safe and simple
flying of the system, horizontally or vertically, in combination with the
range of original accessory fittings. The enclosure features a 35mm speaker
stand socket on the lower side. Compact dimensions of 60,6 x 36 x 34 cm (h x w
x d) and low weight (16 kg).
The enclosure is constructed from 15 mm birch 11-ply, splash-proofed (IP44),
Polyurea coated, RAL 9005 (other RAL colours available on special order).
Front grille meets DIN 18032-3 (ball proof) and is more that 65% acoustically
transparent, replaceable acoustic foam front. Simulation data available for
Ease and Ulysses. A comprehensive range of accessories is available.
Product-Specifications:
Speaker Components 12“ Neodym VC = 76 mm, 1“ driver VC = 44 mm
Amp Power (AES) 2 x 500 Watt AES biamped /
110-230 V
Max. Input Signal 25 dBu
Maximum Level 128 dB
DSP ** DPLMx FPGA Processing 32 bit floating point
AD / DA 24 bit / 96 kHz
Usable Range 50 Hz – 20 kHz (-6 dB)
Coverage (horizontal / vertical) 90° / 60° (rotatable)
Connectors ** 2 x XLR in/thru, 2 x Powercon in/out, 1x Ethercon
Rigging / Fittings 2 x M10, 7 x M8, 35 mm pole mount
Weight ** 16 kg
Size** (height x width x depth) 60,6 x 36,0 x 34,0 cm
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>