legrand BCS-WS-BR Wattstopper Occupancy and Vacancy Sensors User Manual
- June 13, 2024
- Legrand
Table of Contents
- legrand BCS-WS-BR Wattstopper Occupancy and Vacancy Sensors
- Product Information
- Product Usage Instructions
- Legrand’s Building Control Solutions
- Capture Energy Savings And Featured Products
- Wall Box Solutions
- Room Solutions
- Large Space Solutions
- Room Solutions
- More Information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
legrand BCS-WS-BR Wattstopper Occupancy and Vacancy Sensors
Product Information
The Wattstopper product line by Legrand offers a wide range of lighting control solutions to improve energy efficiency and enhance comfort in workspaces. These products are designed to meet the evolving needs of today’s spaces, providing everything from dimmers for ambiance improvement to sensors and timers for automatic energy savings. The product line is stylish, sustainable, and designed to withstand demanding environments.
Key Features
- Unmatched depth and breadth of lighting control products
- Stylish and sustainable commercial solutions
- Variety of sensor technologies: Passive Infrared (PIR), Ultrasonic, and Dual
- Easy installation and configuration to meet energy codes
- Wall box solutions for occupancy and vacancy sensors
Featured Products
Wattstopper offers a range of occupancy and vacancy sensors with different sensor technologies and features:
- Passive Infrared (PIR) Sensor: Detects heat emitted from a human body in motion. Requires a clear line of sight.
- Ultrasonic Sensor: Detects occupant movement within a room and around cubicles.
- Dual Sensor: Combines PIR and ultrasonic technology for hard-to-sense spaces when maximized sensitivity is required.
Product Usage Instructions
To select the appropriate Wattstopper lighting control system for your space, follow these steps:
- Identify the sensor technology that best suits your needs: Passive Infrared (PIR), Ultrasonic, or Dual.
- Consider the coverage area required for your space. The user manual provides coverage information for each sensor model.
- Refer to the product overview section in the user manual to understand the key features and sales tips for each wall switch occupancy sensor model.
- Once you have identified the desired model, locate its SKU in the product overview table.
- Follow the installation instructions provided with the selected wall switch occupancy sensor to install and configure it according to your area’s energy codes.
For more information and detailed specifications on each product, visit www.legrand.us/wattstopper
Legrand’s Building Control Solutions
Building owners have adopted LED lighting fixtures for the long-term benefits of sustainability and cost savings. Adding lighting controls to a workspace increases energy efficiency and provides added comfort. New energy codes require lighting controls as part of their energy reduction programs. Sustainability building rating systems also incentivize total reductions in energy use, of which lighting and plug loads play a key role.
Legrand’s Wattstopper product line delivers unmatched depth and breadth of lighting control products to meet the evolving needs of today’s spaces. Our solutions feature everything from dimmers that help improve ambiance in a space, to sensors and timers that automatically enhance energy savings, to systems that manage everything intelligently.
Wattstopper lighting controls offer a variety of commercial solutions that are both stylish and sustainable. No matter your space, this guide will help you select the Wattstopper lighting control system that is right for you. Adding Legrand’s Wattstopper lighting controls can increase savings and help customers enhance the energy efficiency of their lighting projects. The Wattstopper product line is designed to withstand demanding environments and easily install and configure to meet the energy codes for your area.
Capture Energy Savings And Featured Products
Capture Energy Savings
And grow your business with proven lighting controls. Legrand’s popular stand- alone product line offers proven performance for virtually every application. Our wired Digital Lighting Management solution provides layers of control, offering even more savings. You can rely on us to help solve energy code compliance issues easily and cost effectively. Wattstopper is the most trusted and comprehensive product line in our industry. Customize lighting control to meet your customers’ needs by picking sensor technology and wiring system approach.
FEATURED PRODUCTS
- Wall Box Solutions
- Occupancy and Vacancy Sensors
- Dimmers
- Time Based Controls
- • Room Solutions
- Ceiling Sensors and Power Packs
- Plug Load Controls
- High Bay Sensors and Accessories
- Digital Lighting Management
YOU HAVE CHOICES WHEN IT COMES TO SENSOR TECH
Use this guide to determine the best fit for your customers’ needs.
Passive Infrared (PIR)
Passive infrared technology (PIR) detects heat emitted from a human body in motion. Requires on a clear line of sight.
- Ideal for
- Small offices
- Small conference rooms
- Small storage spaces
Ultrasonic
Ultrasonic technology detects occupant movement within a room and around cubicals.
- Ideal for
- Large restrooms
- Hallways
- Open offices
Dual
Combines PIR and ultrasonic technology for hard-to-sense spaces when maximized sensitivity is required.
- Ideal for
- Executive offices
- Medium and large conference rooms
- Classrooms
Wall Box Solutions
OCCUPANCY AND VACANCY SENSORS
- LOW-PROFILE DESIGN
- ENERGY CODE COMPLIANT
- TURNS LIGHTING OFF WHEN ROOMS ARE UNOCCUPIED
- COLOR-MATCHED LENSES
- OPTIMAL FOR SMALL AND MID-SIZED SPACES
PRODUCT OVERVIEW
Wall switch occupancy and vacancy sensors are optimal for small and mid-sized spaces like office spaces, break rooms, small to mid-sized conference rooms, and restrooms without stalls. An occupancy sensor turns lights ON automatically upon the detection of motion then turns the lights OFF automatically soon after an area is vacated. A vacancy sensor does not offer an option of automatically turning lighting on requiring a manual button press from the occupant (manual/vacancy mode). Our low-profile design and color- matched lenses provide appealing aesthetics for multiple applications.
SALES TIPS AND KEY FEATURES
- Wall Switch Occupancy Sensors automate lighting control based on occupancy, providing both control and sensing capability in a single device.
- PW-311 or DW-311 0-10V dimmable wall switch sensors add dimming as well as occupancy sensing to 0-10V LED retrofit, renovation, or new construction projects.
- PW-311 and DW-311 offer true multi-way technology. When the devices are installedin spaces like large conference rooms with multiple entry points, the devices can communicate with each other so dimming can be controlled from any device.
- Wattstopper Specification Grade products come with a durable color matched lens that provides a unique and clean aesthetic on the wall. Many competitive devices have white lenses that can appear to be the on/off button leading to device damage.
- Many devices, like the WS-301 and PW Series have an Optional Neutral that allow easy installation in retrofit projects.
- The WS-301 is a cost-effective code compliant option for rooms like storage rooms and small public restrooms.
- Durable Trademaster TP26 series wall plates enhance the look of Wattstopper occupancy sensors. Choose the radiant® screwless RWP26 series wall plates for a unique and clean aesthetic for any upscale environment.
WALL SWITCH OCCUPANCY SENSORS
SKU /TECH /VOLTAGE /COVERAGE /DESCRIPTION /NEUTRAL CONDUCTOR REQ’D /COLOR
VACANCY SENSOR MANUAL-ON/AUTOMATIC-OFF
| CS-50-*| PIR| 120V| 600 ft2| Field Customizable| NO| W, I, LA,
| A, B
|
CS-350-N-| PIR| 120V| 600 ft2| Dual Relay, Nightlight| YES| W, I, LA, A, B
CH-250-| PIR| 120V| 600 ft2| Multi-Way| YES| W, I, LA, A, B
| CD-250-| PIR| 120V| 600 ft2| 25-500W Incandescent, Multi-way, Dimming| YES|
W, I, LA, A, B
CU-250-| Ultrasonic| 120V| 600 ft2| Multi-Way| YES| W, I, LA, A, B
RRW600VTC| PIR| 120V| 300 ft²| | NO|
TRI-COLOR
| Interchangeable Face Plates,
| 180° Coverage
OCCUPANCY/VACANCY SENSOR MANUAL-ON OR AUTOMATIC-ON/AUTOMATIC-OFF
RS-150BA-N-*| PIR| 120V| 600 ft2| Nightlight, 30-min. Time Delay| YES| W, I,
LA B
---|---|---|---|---|---|---
PW-100D-*
|
PIR
|
120/277V
|
1050 ft2
| Light Level, up to 600W @ 120V or 1200W @ 277V, Incandescent or 2-wire Fluorescent, Dimmer|
NO
|
W, I, LA, G, B
PW-101D-*
|
PIR
|
120/277V & 347V
|
1050 ft2
| Light Level, up to 600W @ 120V or 1200W @ 277V, Incandescent
Magnetic Low Voltage, Electronic Low Voltage or 2-wire Fluorescent, Dimmer
|
YES
|
W, I, LA, G, B
PW-103N-| PIR| 120/277V| 1050 ft2| Nightlight, Multi-Way, Light Level| YES|
W, I, LA, G, B
PW-301-| PIR| 120/277V & 347V| 1050 ft2| Light Level, Multi-Way| OPTIONAL| W,
I, LA, G, B,R
PW-302-| PIR| 120/277V & 347V| 1050 ft2| Dual Relay, Light Level Multi-Way|
OPTIONAL| W, I, LA, G, B, R
PW-311-| PIR| 120/277V & 347V| 1050 ft2| Partial-On Option, Light Level,
Multi- Way, 0-10V Dimmer| OPTIONAL| W, I, LA, G, B, R
WS-301-*| PIR| 120/277V & 347V| 900 ft2| Light Level, Built-in Light Level|
OPTIONAL| W, I, LA, G, B, R
DW-311-*
|
Dual
|
120/277V & 347V
|
1050 ft²
| Partial-On Option, Light Level, Multi- Way, Selectable Trigger Mode, 0-10V Dimmer|
YES
| W, I, LA, G, B, R
DSW-301-| Dual| 120/277V & 347V| 1050 ft²| Light Level, Multi-Way, Selectable
Trigger Mode| OPTIONAL| W, I, LA, G, B, R
DSW-302-| Dual| 120/277V & 347V| 1050 ft²| Dual Relay, Light Level, Multi-
Way, Selectable Trigger Mode| OPTIONAL| W, I, LA, G, B, R
RRW600UTC| PIR| 120V| 300 ft²| Interchangebale Face Plates, 180° Coverage| NO|
TRI-COLOR
PRODUCT COLOR KEY
DIMMERS
- EASILY UPGRADE FROM A TOGGLE SWITCH
- ENHANCES AMBIANCE AND MOOD
- OPTIMAL FOR RESIDENTIAL AND LIGHT COMMERCIAL
- AVAILABLE IN A VARIETY OF FORM FUNCTIONS
PRODUCT OVERVIEW
From saving energy to setting the mood, our extensive line of easy-to-use dimming solutions delivers an unmatched level of control wherever you live, work, and play. Visually appealing and easy to install, they are a great way to enhance a room’s ambiance while reducing power consumption. They even providemanual lighting control for spaces without energy code requirements. The radiant® collection is all about style with wall plates that have a screwless appearance to provide a smooth and clean aesthetic.
SALES TIPS AND KEY FEATURES
-
Provides an easy way to upgrade a space from standard toggle switches when a neutral wire is available.
-
Interchangeable face plates in the Tri-Color pack (Ivory, White, and Light Almond). Other colors are available in simple and affordable kits.
-
Tru-Universal dimmers work with virtually any 120V dimmable bulb or fixture on typical residential (and light commercial) wiring. Usable in both single-pole and 3-way applications. This reduces the number of SKUs needed for stocking and hauling to job sites.
-
Many Wattstopper dimmers handle larger loads than many competitive offerings.
-
Tru-Universal models self-calibrate when you select your fixture’s lighting type, automatically setting the appropriate minimum voltage to eliminate flicker and poor performance.
-
Low-profile paddle switch offers smoother On/Off control, while a separate, ergonomic slider allows you to adjust light levels with precision.
-
Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
-
Constant memory features returns lights to their previous level when turning back on or after a power outage.
-
No derating* required in multi-gang applications.
-
Reducing the maximum wattage a dimmer can handle.
This is sometimes required for multi-gang applications.
WALL BOX DIMMERS
SKU /VOLTAGE AND LOADS /DESCRIPTION /NEUTRAL CONDUCTOR REQ’D /COLOR
__
RH703PTC
|
120V; 700W Incandescent
|
radiant® Tru Universal Single Pole/3- Way, Preset
|
NO
|
TRI-COLOR
---|---|---|---|---
RH703PTUTC
| 120V; 450W CFL/LED; 700W
Incandescent, Halogen & ELV; 500VA MLV; 5.5A EFL
|
radiant® Tru Universal Single Pole/3- Way, Preset
|
NO
|
TRI-COLOR
RH703PTUW
| 120V; 450W CFL/LED; 700W
Incandescent, Halogen & ELV; 500VA MLV; 5.5A EFL
|
radiant® Tru Universal, Single Pole/3- Way, Preset
|
NO
|
W
RHCL453PTC
|
120V; 450W CFL/LED; 700W
Incandescent
|
radiant® CFL/LED, Single Pole/3-Way, Preset
|
NO
|
TRI-COLOR
RHCL453PW
|
120V; 450W CFL/LED; 700W
Incandescent
|
radiant® CFL/ LED Single Pole/3-Way, Preset
|
NO
|
W
RH4FBL3PTC
|
0-10V 4 wire, dimming of drivers and ballasts
|
radiant® LED/Fluorescent Single Pole/3- Way, Preset
|
NO
|
TRI-COLOR
RH4FBL3PW
|
0-10V 4 wire, dimming of drivers and ballasts)
|
radiant® LED/Fluorescent, Single Pole/3-Way, Preset
|
NO
|
W
TSD703PTUTC
| 700W Incandescent, Halogen & ELV; 500VA MLV; 450W CFL/LED; 5.5A EFL|
Toggle Slide, Tru Universal Single Pole, 3-Way, Preset
|
NO
|
TRI-COLOR
TSD4FBL3PTC
| 120V 10A/277V 5A LED/ fluorescent (0-10V, 4 wire, dimming of drivers and ballasts)|
Toggle Slide, 0-10V, Fluorescent, Single Pole/3-Way, Preset
|
NO
|
TRI-COLOR
PRODUCT COLOR KEY
WALL PLATES
SKU /DESCRIPTION /COLOR
__
TP26*
| __
1-Gang Decorator Trademaster
| __
W, I, LA, GRY, BR, BK, NI, AB, DB
---|---|---
TP262*
|
2-Gang Decorator Trademaster
|
W, I, LA, GRY, BR, BK, O, RED, BL
TP263*
|
3-Gang Decorator Trademaster
|
W, I, LA, GRY, BR, BK, O, RED, BL
TP264*
|
4-Gang Decorator Trademaster
|
W, I, LA, GRY, BR, BK, O, RED, BL
RWP26*
|
1-Gang Decorator radiant® Screwless
|
W, I, LA, GRY, BR, G, BK, NI, DB
RWP262*
|
2-Gang Decorator radiant® Screwless
|
W, I, LA, GRY, BR, G, BK, NI, DB
RWP263*
|
3-Gang Decorator radiant® Screwless
|
W, I, LA, GRY, BR, G, BK, NI, DB
RWP264*
|
4-Gang Decorator radiant® Screwless
|
W, I, LA, GRY, BR, G, BK, NI, DB
INTERCHANGEABLE FACE COVERS
__
RHKIT*
| __
Interchangeable
| __
W, I, LA, GRY, BR, BK, NI, AB, DB
---|---|---
HMKIT*
|
Multi-location dimmer interchangeable
|
W, I, LA, GRY, BR, BK, NI, AB, DB
HMRKIT*
|
Multi-location remote dimmer interchangeable
|
W, I, LA, GRY, BR, BK, NI, AB, DB
PRODUCT COLOR KEY
TIME BASED CONTROLS
- ENERGY CODE COMPLIANT
- TURNS LIGHTING OFF BASED ON PRE-SET SCHEDULES
- EASY TO CUSTOMIZE AND PROGRAM
- OPTIMAL FOR SMALL AND MID-SIZED SPACE
PRODUCT OVERVIEW
Time switches are ideal for controlling outdoor lighting, spa equipment, garage lighting, and lighting in storage areas or rooms where convenience and security are of primary importance. Digital control provides precise control for exact shutoff while preset intervals can be selectable for convenience. Additionally, timers can rovide adjustable audible warnings of impending shutoff. Wattstopper’s Lighting Control Panels provide simple, effective zone- based control of exterior and interior lighting in small applications. Using time-based controls to automatically control lighting and other electrical loads is simple and effortless as well as energy efficient. Both the astronomic and standard scheduling functions provide security by automatically turning lighting on to make the application feel inviting and to provide a lived-in look.
SALES TIPS AND KEY FEATURES
- The RT-100 Programmable Countdown Time Switch automatically turns lighting or other loads off when the programmed on-time expires. Ideal for garages, outdoor lighting, and storage areas.
- The RT-200 Astronomical Time Switch automatically turns lighting or other loads on and off according to user programming. Prior to automatic operation, the local longitude, latitude, time and date must be entered into the time switch. Each of the eight automatic control programs includes user selectable day(s) of operation plus standard and astro on and off times. Day(s) of operation choices include: every day, weekdays, weekends, a selected day, or no days to deactivate the program. A time delay can also be set so lights overridden on will turn off quickly.
- The TS-400 series digital time switches automatically turn lights off after a preset time with an adjustable audible and visual warning before shutoff. The lights will remain on for the duration of the timeout setting which is adjustable from 5 minutes to 12 hours. The TS-400 is an ideal lighting control choice in equipment rooms, storage areas, and closets when allowed by code.
- Lighting Control Panels control up to 8 channels or zones of lighting. Peanut Panels ship pre-assembled in easy-to-install compact packages available for surface and flush mounting. They consist of relays, a system clock, panel intelligence, power supply, tub, and cover. The standard enclosure is NEMA 1-rated.
TIME BASED CONTROLS
RT-20-*
|
120/277V
|
Time Switch, 4 preset on-times from 5 to 30 minutes, 4-Button Countdown
|
YES
| W, I, LA, B
---|---|---|---|---
RT-50-*
|
600W 120V AC, 60Hz
|
6 Button Preset Countdown Time Switch
|
YES
| W, I, LA, B
RT-100-*
|
120V
|
Time Switch, Programmable on-time from 5 minutes to 12 hours, Programmable Countdown
|
YES
| W, I, LA, B
RT-200-*
|
120/277V
| Astronomic Time Switch, includes eight programmable control schedules.
Dawn/Dusk Scheduling with optional time delay or standard time
|
YES
|
W, I, LA, A, B
TS-400-*
|
120/277V
|
Time Switch, Programmable on-time from 5 minutes to 12 hours, Programmable Countdown
|
NO
| W, I, LA, G, B
TS-400–24-*
|
24V AC/DC
|
Time Switch, Programmable on-time from 5 minutes to 12 hours, Programmable Countdown
|
NO
| W, I, LA, G, B
PANELS & RELAYS
PANELS
SKU VOLTAGE| MOUNT| RELAYS| DIMENSIONS (H x W x D) &| WEIGHT| COLOR
|
LP8S-8-115
|
115/277V
|
Surface
|
HDR-11 relays (qty 8) included
|
19″W x 22″L x 5.5″H
29.4 lbs
|
BLACK
| | | | |
|
LP8S-8-G-115
|
115/277V
|
Surface
| HDR-11 relays (qty 8) and group switch card (qty 1) included|
19″W x 22″L x 5.5″H
29.4 lbs
|
BLACK
LC8-120/277
|
120/277V
|
Flush
|
LCSP-2 and/or LCDP-1 (order separately)
|
14.00” x 12.00” x 3.00”
8.1 lbs
|
BLACK
LC8-120/277| | | | | |
RELAYS FOR LC8 PANELS
SKU| VOLTAGE| MOUNT| RELAYS| WEIGHT| | COLOR
LCSP-2| 120/277V| DIN-Rail| Dual 1-pole 20A relay| 0.37 lbs|
N/A
LCDP-1| 208, 240, or 480V| DIN-Rail| Single 2-pole 20A relay| 0.49 lbs|
N/A
PRODUCT COLOR KEY
Room Solutions
CEILING SENSORS AND POWER PACKS
- PLENUM RATED
- ENERGY CODE COMPLIANT
- WALL AND CEILING MOUNT OCCUPANCY SENSORS FOR MEDIUM AND LARGE ROOMS
- OVERCURRENT PROTECTION (LOW VOLTAGE)
- HIGH-EFFICIENCY SWITCHING POWER SUPPLY
PRODUCT OVERVIEW
Ceiling sensors provide clear visibility into the workspaces that are being utilized throughout the workday. Our ceiling sensors provide 360-degree coverage in medium and large sized rooms. Power Packs are necessary to provide power to occupancy sensors as well as load switching circuitry. The BZ-150 and BZ-250 power packs are ideal for providing code compliant manual-on functionality to the DCLV2 wall switch.
SALES TIPS AND KEY FEATURES
- Multiple technology options available:
- PIR sensors are ideal in rooms that have direct line of sight to the sensor like small conference rooms or offices.
- Ultrasonic is an ideal technology to use in rooms that have large partitions, like multistall restrooms or in corridors.
- Dual Technology ceiling sensors are ideal in open office spaces that have cubicles. Dual technology options are preferred in spaces that have obstructions like partitions, furniture, filing cabinets, and indoor plants. Ideal in classrooms, conference rooms and executive offices.
- DCLV2 and BZ-150 or BZ-250 Power Packs combined with a ceiling sensor allows Manual-ON or Partial-ON capability which allows energy code compliance in even the most stringent states driven by IECC or ASHRAE 90.1 energy codes.
- DCLV2 wall switch is an easy to use 0-10V paddle dimmer. It provides a clean aesthetic and looks ideal with decorator plates like radiant screwless wall plates.
- Choose from LVSW switches or DCLV dimmers for 0-10V applications.
- Add photocells in areas that can take advantage of being zoned for daylight harvesting.
- Add emergency lighting devices like the ELCU to provide safety and code compliance to allow for safe egress.
CEILING SENSORS
| SKU | TECH | VOLTAGE | CURRENT | POWER PACK REQ’D. | DESCRIPTION | COVERAGE |
|---|
CI-24
|
PIR
|
24V AC/DC
|
37mA
|
YES
|
Low Profile, Isolated Relay
|
360° 1,200 sq. ft.
CI-200
|
PIR
|
24VDC
|
20mA
|
YES
|
Low Profile, Isolated Relay, Built-In Light Level
|
360° 1,200 sq. ft.
CI-205
|
PIR
|
24VDC
|
11mA
|
YES
|
Low Profile, No Isolated Relay, Built-In Light Level Sensor
|
360° 1,200 sq. ft.
CI-300
|
PIR
|
24VDC
|
20mA
|
YES
|
Isolated Relay, Built-In Light Level Sensor
|
360° 1,200 sq. ft
CI-305
|
PIR
|
24VDC
|
9mA
|
YES
|
Low Profile, Line Voltage
|
360° , 1,200 sq. ft.
CI-355-*
|
PIR
| 120/277V
& 230V & 347V
|
N/A
|
NO
|
Low Profile, Line Voltage
|
360° , 1,200 sq. ft
CX-100-*
|
PIR
|
24VDC
|
19mA
|
YES
|
Corner Mount, Isolated relay, Built-In Light Level Sensor
| 2,000 sq. ft;
50-120 ft. linear
CX-105-*
|
PIR
|
24VDC
|
8mA
|
YES
|
Corner Mount, Isolated Relay, Built-In Light Level Sensor
| 90° 2,000 sq. ft.;
50-120 ft linear
UT-305-2
|
Ultrasonic
|
24VDC
|
30mA
|
YES
|
Configurable zone patterns
|
1,000 sq. ft.
UT-355-*
|
Ultrasonic
|
120/277 & 347V
|
N/A
|
NO
|
Low-profile, Line Voltage
|
500-2000 sq. ft
W-500A
|
Ultrasonic
|
24VDC
|
16mA
|
YES
|
Automatically adjusts detection threshold
|
360° 500 sq. ft.
W-1000A
|
Ultrasonic
|
24VDC
|
16mA
|
YES
|
Automatically adjusts detection threshold
|
360° 1,000 sq. ft.
W-2000A
|
Ultrasonic
|
24VDC
|
16mA
|
YES
|
Automatically adjusts detection threshold
|
360° 2,000 sq. ft.
DT-200
|
Dual
|
24VDC
|
25mA
|
YES
|
Corner Mount, Built-in light level sensor, Walk-through Mode turns lights off three minutes
| 1000 sq. ft. typ. Up to 2,000 sq. ft. walking motion
DT-205
|
Dual
|
24VDC
|
25mA
|
YES
|
Corner Mount
| 1000 sq. ft. typ. Up to 2,000 sq. ft. walking motion
DT-300
|
Dual
|
24VDC
| 25 mA (DC)
/74 mA (AC)
|
YES
|
Low-profile, Isolated Relay, Built-in light level sensor. 40Khz, 8 occupancy logic options
|
360° 1,000 sq. ft.
DT-305
|
Dual
|
24VDC
| 16 mA (DC)
/69 mA (AC)
|
YES
|
Low-profile, 40Khz, 8 occupancy logic options
|
360° 1,000 sq. ft.
DT-355-*
|
Dual
|
120/277 & 347V
|
N/A
|
NO
|
Low-profile, Line Voltage. 40Khz, 8 occupancy logic options
|
1,000 sq. ft. 360°
WALL SWITCHES
| SKU | VOLTAGE | DESCRIPTION | COLORS |
|---|---|---|---|
| LVSW-101-* | 24VDC | 1 button, low voltage | W, I, LA, G, B |
| LVSW-102-* | 24VDC | 2 button, low voltage | W, I, LA, G, B |
| LVSW-103-* | 24VDC | 3 button, low voltage | W, I, LA, G, B |
| LVSW-104-* | 24VDC | 4 button, low voltage | W, I, LA, G, B |
| LVSW-108-* | 24VDC | 8 button, low voltage | W, I, LA, G, B |
| DCLV2-* | 24V AC/DC | 0-10V dimmer Manual-On or Automatic-On | W, I, LA, G, B, R |
POWER PACKS
SKU DESCRIPTION RATING OUTPUT
|
BZ-50
| |
B347D-P
|
347VAC, 15A Ballast Load, 150mA
|
347V, 15A
|
24V DC, 150 mA
BZ-50
|
Automatic On/Off
| 120, 230, 277V,
20A, 50/60Hz
|
24V DC, 225 mA
BZ-150
|
Automatic or Manual On/Off,
| 120, 230, 277V,
20A, 50/60Hz
|
24V DC, 225 mA
| BZ-150| |
BZ-200
|
Auto On/Off, rated for lighting or plug loads; load On/Off Button
| 120-277V, 20A,
50/60Hz
|
24V DC, 225 mA
BZ-250
|
Auto or Manual On/Off, rated for lighting or plug loads; load On/Off Button
| 120-277V, 20A,
50/60Hz
|
24V DC, 225 mA
| | |
BZ-250-347
|
Auto or Manual On/Off, rated for lighting or plug loads, load On/Off Button
| 120-347V, 16A (15A
plug load), 50/60 Hz
|
24V DC, 225 mA
PRODUCT COLOR KEY
PLUG LOAD CONTROLS
- CODE COMPLIANT WITH ASHRAE 90.1 AND CA TITLE 24
- REDUCES “VAMPIRE” LOADS TO SAVE ENERGY
- PAIRS WITH OTHER DEVICES FOR A TOTAL ROOM SOLUTIONS
PRODUCT OVERVIEW
Controlling plug loads can help building owners and facility managers be more energy efficient and code compliant. ASHRAE 90.1 standards require that 50 percent of receptacle loads to be controlled by automatic means in specified spaces. Plug load control is the ability to limit the electricity used by the products that are powered by an ordinary AC plug. These might include coffeemakers, microwaves, printers, water coolers and task lights. Occupancy- Based solutions recognize when people are in the room and sends power to the controlled receptacles. When the room is empty, power is turned off automatically.
SALES TIPS AND KEY FEATURES
- Plug load controls can be integrated with stand-alone occupancy sensors or DLM controls solutions.
- WRC receptacles are available in half-controlled and fully-controlled plugs and are compliant with NEC, CA Title 24, and ASHRAE 90.1.
IDEAL APPLICATIONS
- COMMERCIAL OFFICE: Cut power to monitors, task lighting printers, space heaters, coffee pots, water coolers, toaster ovens, and more when not in use.
- HOSPITALITY: Shut off plugs that control devices like curling irons when room becomes vacant.
- EDUCATION: Eliminate vampire loads in computer labs, like printers, scanners and monitors.
- Simple, three-step binding process for wireless communication with RF Signal Transmitter.
- Feed-thru capability allows for downstream control of multiple standard receptacles.
- LED Indicator Light on the receptacle guides the binding process and indicates power to the receptacle.
- One RF Signal Transmitter can bind multiple receptacles for convenient new and retrofit solutions.
- Communication range of up to 150 feet in ideal environment.
- Pair with a 24V occupancy sensor and universal voltage power pack for an occupancy-based solution.
PLUG LOAD CONTROLS
SKU /TECH /VOLTAGE /DESCRIPTION /COLOR
__
IDP-3050-A
|
PIR
|
120V, 12A,
50/60 Hz
|
Isole Power Strip with Personal Sensor, 8 outlets, 6 controlled & 2 uncontrolled, 48,000A surge protection
|
G
---|---|---|---|---
WRC-TX
|
Proprietary Wireless Signal
|
24V
| Connects to any standalone Wattstopper 24VDC Occupancy Sensor and Power Pack.
RF transmitter sends occupancy sensor status to controlled receptacles
|
W
WRC-15-1-*
|
Proprietary Wireless Signal
|
120V
|
15A duplex receptacle, half controlled
|
W, I, LA, G, B
WRC-15-2-*
|
Proprietary Wireless Signal
|
120V
|
15A duplex receptacle, fully controlled
|
W, I, LA, G, B
WRC-20-1-*
|
Proprietary Wireless Signal
|
120V
|
20A duplex receptacle, half controlled
|
W, I, LA, G, B
WRC-20-2-*
|
Proprietary Wireless Signal
|
120V
|
20A duplex receptacle, fully controlled
|
W, I, LA, G, B
For DLM Rooms, use the same receptacles shown except use the WRC-TX-LM shown on page 20 instead of WRC-TX.
PRODUCT COLOR KEY
Large Space Solutions
HIGH BAY SENSORS
- PROVIDE CODE COMPLIANCE IN WAREHOUSE SPACES
- MAXIMIZE THE LIFE AND PERFORMANCE OF THE HIGH BAY LIGHTING
- CONFIGURABILITY BASED ON SPACE ACTIVITY
- EASY TO INSTALL
PRODUCT OVERVIEW
Controls in the high bay market has been rare in traditional high bay lighting, since the warm up and cool down times are long and degrade High Bay Lamps. With the advent of LED in the High Bay Lighting Market, dimming and on/off controls is not only feasible, but also prolongs the life of the High Bay LED Lighting investment. Adding lighting controls to High Bay Lighting can be an added revenue stream for Distributors and Contractors and can prolong the life of the lighting investment.
SALES TIPS AND KEY FEATURES
- Provide On/Off switching to High Bay Lighting when spaces or aisles go unoccupied.
- HBP-2×2 provides daylight harvesting and 0-10V continuous dimming.
- Lens on many Wattstopper High Bay Sensors provide a wide range of coverage, from 8-40 feet.
- Ideal for warehouse, back-of-house commercial, parking structures, manufacturing or big box retail applications.
- HBP products offer a snap-in installation, which is unique to the market. This allows for fast installation by the contractor.
- HBP-2×2 Series provides code compliance in warehouse spaces by automatically adjust electric light levels based on ambient light contributions.
- Many new warehouse and big box applications are taking advantage of skylights. The HBP-2×2 series can save additional energy costs in these spaces by leveraging daylight harvesting and dim the output of the lighting when ambient lighting is sufficient.
HIGH BAY SENSORS
SKU| TECH| VOLTAGE| POWER PACK REQ’D|
DESCRIPTION| MOUNTING HEIGHT
---|---|---|---|---|---
OCCUPANCY SENSOR KO MOUNT
|
HBP-111-L7
|
PIR
|
120/277/347V
|
NO
| High and Low Bay, Configurable with Wireless Remote, Hold-Off Daylighting Feature. Requires FSIR IR remote|
15-40 feet
HBP-112-L7
|
120/277/347V
|
NO
| High and Low Bay, Hold-Off Daylighting Feature.
Does not require FSIR IR remote
- Select lens for desired coverage, order separately (except for HBP-111-L7 & HPB-112-L7).
HIGH BAY LENSES AND ACCESSORIES
SKU /DESCRIPTION /COVERAGE
__
HBL1
| __
Aisleway Lens for HBxxx-B series
| __
60′ x 20′ Rectangular Coverage @ 40′ mounting
---|---|---
__
HBL1M
| __
Aisleway Lens for HBxxx-B series
| 30′ x 20′ one sided Rectangular Coverage @ 40′ mounting
__
HBL2
| __
Low bay applications for HBxxx-B series
| 48′ Diameter Round Coverage @ 8′ mounting
__
HBL2W
| __
Weatherproof low bay applications for HBxxx-B series
| 48′ Diameter Round Coverage @ 8′ mounting
__
HBL3
| __
Mid-bay, high density lens for HBxxx-B series
| 40′ Diameter Round Coverage @ 20′ mounting
__
HBL3W
| __
Weatherproof mid-bay, high density lens for HBxxx-B series
| 40′ Diameter Round Coverage @ 20′ mounting
__
HBL7
| __
High bay lens for HBxxx-B series
| 100′ Diameter Round Coverage @ 40′ mounting
__
HBL7W
| __
Weatherproof high bay lens for HBxxx-B series
| 100′ Diameter Round
Coverage @ 40′
__
HBEM3
| Extender module for mounting on side of the fixture for HBxxx-B series| __
N/A
__
HBP-EM1
| Extender module for mounting below fixture rotatable snap-on aisleway masking for HBxxx-B series| __
N/A
__
HBP-SM1
| Surface mount module for mounting to bottom of fixture for HBxxx-B series| __
N/A
__
FSIR-100
| __
Remote handheld configuration tool for HBP-111-L7
| __
N/A
Room Solutions
DIGITAL LIGHTING MANAGEMENT
- IDEAL FOR SMALL TO LARGE BUILDING PROJECTS
- ENERGY CODE COMPLIANT
- INTEGRATE WITH BUILDING AUTOMATION SYSTEMS
- SECURE AND EASY-TO-INSTALL DIGITAL LIGHTING CONTROL SOLUTION
PRODUCT OVERVIEW
Evolving energy codes, transformative lighting technology, and high- performance buildings require powerful and robust energy savings solutions. The adaptable Wattstopper Digital Lighting Management (DLM) technology platform and suite of lighting control services provide control infrastructure at every switch, outlet, and lighting load for optimal energy performance. The DLM system is a scalable platform of connected devices for a single office space, floor, or networking entire buildings and campuses. Engineered for customers from designers to installers to end users, DLM is the best-of-class solution ideal of large building projects such as commercial office, healthcare and education facilities.
SALES TIPS AND KEY FEATURES
- System changes can be made manually, using handheld remote or phone App, LMCS software, or Front End Segment Manager.
- Optimizing energy performance with DLM makes it easy to meet the latest code requirements.
- Easy integration with Building Automation Systems (BAS) through use of standard BACnet objects to represent DLM local network device settings and states.
- Building operators can create normal and after-hours lighting control schedules and conveniently monitor and fine tune DLM operation for even greater energy savings.
- Optionally monitor power consumption in real time.
- Enables centralized control of individual DLM local networks.
- Intuitive user interfaces, convenient remote diagnostic support, and Plug n’ Go™ automatic configuration make DLM simple to use and install.
- Plugs together using Cat 5e cables with RJ45 connectors eliminating wiring errors.
- Control of simple to complex sequences of operation via Push n’ Learn™ personalization or LMCS software, an advanced PC-based software programming tool, providing easy system management.
- Support the drive towards a net zero future. DLM scales up to accommodate whole buildings or campuses designed for the highest levels of energy performance.
- Future-proof your building today with Wattstopper DLM.
ROOM & PLUG LOAD CONTROLLERS
SKU /DESCRIPTION /VOLTAGE /LOAD
| LMRC-101| 1 relay On/Off Room Controller| 120/230/277V| Ballast: 20A;
Incandescent: 20A; Motor: 1 Hp
---|---|---|---|---
LMRC-102| 2 relay On/Off Room Controller| 120/230/277V| Ballast: 20A;
Incandescent: 20A; Motor: 1 Hp
LMRC-111-M| 1 relay 0-10V Room Controller, Metered| 120/277V| Ballast: 10A;
Incandescent: 10A
LMRC-112-M| 2 relay 0-10V Room Controller, Metered| 120/277V| Ballast: 10A;
Incandescent: 10A
LMRC-211| 1 relay 0-10V Room Controller, Current Measurement| 120/230/277V &
347V| Ballast: 20A; Incandescent: 20A; Motor: 1 Hp
LMRC-212| 2 relay 0-10V Room Controller, Current Measurement| 120/230/277V &
347V| Ballast: 20A; Incandescent: 20A; Motor: 1 Hp
LMRC-213| 3 relay 0-10V Room Controller, Current Measurement| 120/230/277V &
347V| Ballast: 20A; Incandescent: 20A; Motor: 1 Hp
LMRC-221| 1 Load Forward Phase Dimming Room Controller, Current Measurement|
120/277V| 16A or 20A
LMRC-222| 2 Load Forward Phase Dimming Room Controller, Current Measurement|
120/277V| 16A or 20A
LMPL-111-20M| Digital Enhanced Plug Load Controller, On/Off, Metered| 120V|
Ballast: 20A; Incandescent: 20A; Motor Load: 1 Hp
WRC-TX-LM
| Model connects in Wired DLM Rooms with an occupancy sensor using Cat 5e cable. RF transmitter sends occupancy sensor status to controlled receptacles. Compatible receptacles on page 13|
24V
|
15A or 20A Receptacles
ACCESSORIES
SKU /DESCRIPTION /LENGTH /COLOR /PLENUM RATED V
| LMRJ-P03| RJ45 Cable| 3 ft| Green| YES
---|---|---|---|---|---
LMRJ-P03-W| RJ45 Cable| 3 ft| White| YES
LMRJ-P10| RJ45 Cable| 10 ft| Green| YES
LMRJ-P10-W| RJ45 Cable| 10 ft| White| YES
LMRJ-P15| RJ45 Cable| 15 ft| Green| YES
LMRJ-P15-W| RJ45 Cable| 15 ft| White| YES
LMRJ-P25| RJ45 Cable| 25 ft| Green| YES
LMRJ-P25-W| RJ45 Cable| 25 ft| White| YES
LMRJ-P35| RJ45 Cable| 35 ft| Green| YES
LMRJ-P35-W| RJ45 Cable| 35 ft| White| YES
| LMRJ-P50 | RJ45 Cable | 50 ft | Green | YES |
|---|---|---|---|---|
| LMRJ-P50-W | RJ45 Cable | 50 ft | White | YES |
| LMRJ-P75 | RJ45 Cable | 75 ft | Green | YES |
| LMRJ-P75-W | RJ45 Cable | 75 ft | White | YES |
| LMRJ-P100 | RJ45 Cable | 100 ft | Green | YES |
| LMRJ-P100-W | RJ45 Cable | 100 ft | White | YES |
| LMRJ-01 | RJ45 Cable | 6 in | Green | NO |
WALLBOX DEVICES
| SKU | TECH | DESCRIPTION | RATING | COLOR |
|---|
SWITCH WITH INTEGRATED SENSOR
| LMPW-101-| PIR| 1 Button Wall Mount Sensor w/IR| 24VDC| W, I, LA, G, B, R
LMPW-102-| PIR| 2 Button Wall Mount Sensor w/IR| 24VDC| W, I, LA, G, B, R
LMDW-101-| Dual| 1 Button Wall Mount Sensor w/IR| 24VDC| W, I, LA, G, B, R
LMDW-102-| Dual| 2 Button Wall Mount Sensor w/IR| 24VDC| W, I, LA, G, B, R
SWITCHES AND DIMMERS
| LMDM-101| N/A| Dimming Wall Switch, 1 paddle, w/IR| 24VDC| W, I, LA,
| G, B, R
|
LMSW-102| N/A| Digital w/IR, one button configuration| 24VDC| W, I, LA, G, B,
R
LMSW-102| N/A| Digital w/IR, two button configuration| 24VDC| W, I, LA,
LMDM-101 LMSW-101 LMSW-102| G, B, R
| LMSW-103| N/A| Digital w/IR, three button configuration| 24VDC| W, I, LA, G,
B, R
LMSW-104| N/A| Digital w/IR, four button configuration| 24VDC| W, I, LA, G, B,
R
LMSW-103 LMSW-104 LMSW-108|
LMSW-108| N/A| Digital w/IR, eight button configuration| 24VDC| W, I, LA,
| G, B, R
LMSW & LMDM replacement trim color kits can be custom engraved and are available in: white, light almond, ivory, gray, and black.
PRODUCT COLOR KEY
CONFIGURATION TOOLS
LIGHTING CONTROL PANELS
LMCPxx
|
DLM Control Panel with up to 8, 24, or 48 relays
|
120/277 60Hz; 120/347V, 60Hz; 240V, 50Hz
---|---|---
LMCPxx-10V
|
DLM Control Panel with up to 8, 24, or 48 relays, includes 0-10V dimming
|
120/277 60Hz; 120/347V, 60Hz; 240V, 50Hz
SENSORS
SKU TECH DESCRIPTION RATING
OCCUPANCY SENSORS
| LMPC-100| PIR| Digital Ceiling Mount| 24V
LMUC-100-2| Ultrasonic| Digital Ceiling Mount| 24V
LMDC-100| Dual| Digital Ceiling Mount| 24V
LMPX-100| PIR| Digital Corner Mount| 24V
LMDX-100| Dual| Digital Corner Mount| 24V
DAYLIGHT SENSORS
|
LMLS-400
|
N/A
| Single zone Closed loop photosensor. Photodiode with an extended range of 1-1,553 footcandles (fc).
Spatial response: 100º
|
24V
LMLS-500| N/A| Multi-zone open loop photosensor. Photodiode with an extended range of 1-6,553 footcandles (fc).
Spatial response: 60º
| 24V
WIRELESS DLM DEVICES
ROOM & PLUG LOAD CONTROLLERS
SKU| DESCRIPTION| VOLTAGE| LOAD
| LMRC-611-16M| DLM Single Relay Wireless Room Controller, 0-10V Dimming,
Metered| 120/277VAC| 16A
LMRC-611MCC| 1 Relay with Contact Output, Metered| 0-10V,
120/277VAC
| 10A
LMRC-611MCC-A| 1 Relay with External Antenna, Metered, Chicago Plenum
Approved| 0-10V,
120/277VAC
| 10A
LMRC-611MCC-A| LMPL-611-20M| 1 Relay, Metered, Plug Load Controller| 120V|
20A
WALLBOX DEVICES
| SKU| DESCRIPTION| | COLOR
| LMDM-601-| 1-Button Wireless Dimmer Switch, multiway, battery powered|
W, I, LA, G, B
LMSW-605-| 5-Button Wireless Scene Switch, multiway, battery powered| W, I,
LA, G, B
LMSW-605-I-ENG1-*| DLM Pre-Engraved Scene Switch, Standard engraving is
available.| W, I, LA, G, B
SENSORS
OCCUPANCY SENSORS| SKU| DESCRIPTION| | COVERAGE
| LMPX-600| Corner Mount, Options for long range lens or extra wide angle
lens| 2,000 sq. ft. walking motion
LMPC-600| Ceiling Mount, Options for high density, low profile lens and
extended height lens| 360°, 784 sq. ft.
LMPC-600-5| Ceiling Mount, Extended Heigh Lens| 360°, 3,800 sq. ft
PRODUCT COLOR KEY
More Information
DLM CONFIGURATION APP
Wireless Systems use the DLM App for setting up individual rooms – available at both Android and Apple Store
Contact
BUILDING CONTROL SYSTEMS
- 2240 Campbell Creek Blvd. #110 Richardson, Texas 75082
- 800.879.8585
- www.legrand.us
©2022 Legrand. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>