IDK MSD-VIV1UF MSD V6 Modular Input User Guide
- June 13, 2024
- IDK
Table of Contents
IDK MSD-VIV1UF MSD V6 Modular Input
The MSD-VIV1UF is a 10GbE (SDVoE) modular input that is a factory-installed option for the MSD-V6 series. This modular input can receive 10GbE (SDVoE) signal over a fiber optic cable for a long-haul transmission. Up to 4K@60 video and multi-channel audio can be input. RS-232C/LAN control communication is also supported.
Specification
| MSD-VIV1UF
---|---
Video/Audio input| 10GbE2| 1 input
SDVoE, AES-128 Deep Color1
640×480@60 to 2560×1600@60 Reduced Blanking 480p, 576p to
3840×2160@24/25/30/50/59.94/60 (4:4:4), 3840×2160@50/59.94/60 (4:2:0),
4096×2160@24/25/30/50/59.94/60 (4:4:4), 4096×2160@50/59.94/60 (4:2:0)
Color depth: 24/30 bits
For all supported video signals, see the specification of MSD-V6.
LPCM: Up to 8 channels Sampling frequency: 32/44.1/48/88.2/96/176.4/192 kHz
Reference level: -20 dBFS, Max. input level: 0 dBFS
RS-232C/LAN
Connector: SFP+ For SFP+ transceiver specification, see the table below.
1 x.v. Color/3D/HDR/ARC/HEC are not supported.
2 For 10GbE extension, use this product in combination with IDK’s other SDVoE supported products.
SFP+ transceiver specification
| P/N | MSD-VIV1UF-MM | MSD-VIV1UF-SM | Optional | MSD-VIV1UF |
|---|---|---|---|---|
| SFP+ transceiver | 10G-MM-SFP | 10G-SM-SFP | 10G-SM40-SFP | Without SFP+ |
transceiver
Fiber| Multimode fiber| Singlehood fiber| Singlehood fiber| N/A
Wave length| 850 nm (VCSEL laser)| 1310 nm (DFB laser)| 1550 nm (EML laser)
Laser safety| Class 1 (JIS C 6802, IEC60825-1)
Maximum distances| OM3: 984 ft. (300 m)| OS1: 6.21 mi. (10 km)| OS1: 24.85
mi. (40 km)
Receiver sensitivity (OMA) @10.3Gbps| -11.1 dBm or higher| -12.6 dBm or
higher| -16 dBm or higher
Average Launch Power| -5 dBm to -1 dBm| -8.2 dBm to +0.5 dBm| -1 dBm to +2 dBm
Max. input power| +0.5 dBm| +0.5 dBm| -1 dBm
Polishing| PC polishing| UPC polishing, SPC polishing
APC polishing is not supported
Connector| LC (Duplex)
*The maximum transmission distance is measured under the following conditions: Fiber that is polished by a recommended method is used, there is no interconnection, and the allowable bending radius is not exceeded.
Front & Rear Panels
MSD-V62UF with MSD-VIV1UF (Option)
- All specifications and drawings are subject to change without notice.
- HDBaseT™ and the HDBaseT Alliance Logo are trademarks of the HDBaseT Alliance. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
- SDVoE™ and SDVoE logo are trademarks of SDVoE Alliance.
- All other company and product names mentioned in this document are either registered trademarks or trademarks of their respective owners. In this document, the “®” or “™” marks may not be specified.
- ©2023 IDK Corporation, all rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>