ZEVIO Babyfoon Comfort HD with Camera Instructions

ZEVIO Babyfoon Comfort HD with Camera

Product Information

• Product Name: Zevio Babyfoon Comfort HD
• Product Type: Baby Monitor

Product Usage Instructions

1. Read the user’s manual thoroughly before using the device.
2. Ensure that the adapter cable is kept away from the baby to avoid any choking hazards.
3. Keep the baby camera unit and cable out of the reach ofc hildren more than 3 feet or 1 meter away.
4. Do not place the camera or power supply in a child’s cot/crib.
5. Fix the camera in a place where it can observe children/babies well.
6. Place the camera on a flat surface such as a dressing table, writing desk, or shelf.
7. This baby monitor is safe to use when operating in accordance with the instructions provided.
8. Do not use the baby monitor as a substitute for adultg uardianship.
9. Keep the user guide in a safe place for future reference.
10. Do not cover the baby monitor with a towel or blanket.
11. Avoid using the baby monitor near water.
12. Do not install the baby monitor near a heat source.
13. Only use the supplied charger and power adaptor. Do not use another charger or power adaptor as it may damage the device.
14. Avoid touching the plug with a sharp or metal object.
15. Ensure wireless communication can be established between the camera and displayer.
16. Avoid placing large metal objects, refrigerators, metal doors, or reinforced concrete between the camera and displayer as they may block wireless signals.
17. The signal strength may be affected by solid buildings, such as walls, radios, or electrical equipment like televisions and computers.
18. If the signal is lost, try moving the device to a different location indoors.
19. Avoid placing the displayer and the camera within a range of 1.5 meters to prevent howling.

Zevio Babyfoon Comfort HD
Handleiding
1

Dear Customer,
This user’s manual can help you have a thorough understanding of this product, and
solve any problem that customers may encounter in using our products. Please read carefully for the user guide before using the device.
If you have any questions, feel free to reach out to us at any time.
Warning
DANGER – Keep the adapter cable away from the baby to
avoid a choking hazard from entangling the baby’s neck. Keep the baby camera unit and cable out of the reach of children more than 3 feet or 1 meter away. Do not place the camera or power supply in a child’s cot/crib.
Camera settings and usage
Fix the camera in a place where can be observed well of children/babies. Place the camera on a flat surface such as a dressing table, writing desk or shelf.
This baby monitor meets all relevant standards related to electromagnetic fields and is safe to use when operating in accordance with the instructions of the user guide.
Therefore, please read the user guide carefully before using the device. Must be assembled by an adult.
2

This baby monitor can not be used instead of adult guardianship. Keep this user guide in a safe place for future reference. Do not cover the baby monitor with a towel or blanket. Do not use the baby monitor near water. Do not install the baby monitor near a heat source.
Only use the supplied charger and power adaptor. Never use another charger o power adaptor as this may damage the device. Do not touch the plug with a sharp or metal object.

Important notes for installing a baby monitor
When using the camera and the displayer, it’s a must to be able to establish a wireless communication between them. The communication distance between the two devices is affected by environmental conditions.
Any large metal objects between two devices may block wireless signals,such a refrigerators, metal doors or reinforced concrete. The strength of the signal may be attenuated by other solid buildings (such as walls), radios or electrical equipment (such as televisions, computers). If the signal lost, try to move the device to a different location indoors.
Do not place the displayer and the camera in a range of 1.5 meter, otherwise it will cause howling.

Product list

1 * Camera

1 * Displayer

1 * User Manual

2 * Power Adapter+ power-charging cable

Longer charging cable for camera

PRODUCT OVERVIEW

DISPLAYER OVERVIEW

INDICATOR LIGHT

MIC AUDIO KEY

OK DIRECTI MENU
ON KEY

SPEAKER BRACKET

POWE R SWITC H
POWERCHARGING PORT
RESET KEY

5

DISPLAYER STATUS BAR ICON

SIGNAL LEVEL (5 Levels) NO SIGNAL CAMERA 1 CAMERA 2 (customized) CAMERA IMAGE ZOOM IN 10 TIMES CAMERA SWITCH LULLABY TURN ON /OFF Volume setting (6 levels can be set)
INTERCOM MODE

NIGHT VISION MODE

CRYING DETECTION HIGH,MED,LOW

BABY ROOM TEMPERATURE DISPLAY

SYSTEM TIME

TURN ON KEY-PRESS SOUNDS BATTERY POWER

1.3 DISPLAYER MENU ICON

Volume setting (6 levels)

Feeding Reminder Time Setting

Can Set 5 Alarms

Lullaby Selection (8

Lullabies) System

Time Setting

Temperature Setting
( / / Temperature alarm on
and off) Camera Selection (add/delete/switch) VOX Sound Detection Setting LCD brightness (6 levels)

Camera zoom in / out

6

1.4 CAMERA OVERVIEW
SENSOR LEN
INFRARED LIGHT INDICATOR LIGHT

MIC
SPEAKER POWER PORT

2. OPERATION

THERMISTOR

PAIRING KEY

HOW TO TURN ON DEVICE
The baby monitor provides two power adaptors + power-charging cables. One is to connect the camera, and the other is to connect the displayer for charging battery. (1) Connect the camera with power adaptor + cable, and plug the power adapter to the 110-240V AC outlet. The camera will automatically be turned on, and the blue
indicator will be on (the night mode will automatically turn off)Connect the
displayer with power adaptor + cable, and plug the power adapter to the 110-240V AC outlet. pressing the power key to turn on monitor. (2) Press and hold the power button of the display device for 3 seconds to turn it on or off.

PAIRING
Once the camera and the displayer are both turned on, they will be paired automatically. If not, follow the steps as below: (1) Turn on the displayer and press menu key . Pressor

to select camera and press to confirm. In the pop-up bar, press button to select and press to confirm, and then press or to chooseor to pair. At this time, the blue indicator light of the display
device will flash and a prompt will appear on the display device

7

screen, the blue indicator light stops blinking when the device is paired successfully. If no device is paired for 30 seconds, it will automatically exit the pairing mode, or you can press and hold for 1.5 seconds within 30 seconds to exit the pairing mode directly. (2) When the camera is connected to the power supply and turned on, Press and
hold the pairing key for 3 seconds, and then the blue light will flash quickly. It means that the camera is now in the pairing mode. Once the camera has connected with the displayer, the indicator light will turn off. Now the displayer can show the image that the camera captures. If there is no device pairing for 1 minute, it will automatically exit the pairing mode.
(Note: One camera can only be connected to one monitor. If the pairing fails several times in a row, please contact the after-sales service or local dealer.)

CHECKING THE IMAGE OF BABY CAMERA
When both the camera and the displayer are normally turned on, the displayer should be able to show the image from the camera (If the displayer does not show the image properly, please check the pairing condition.).
1 If the connection fails, please re-pair according to the 2.2 PAIRING instruction.
2 Press the key to enter the menu, and select the camera you want to watch.

3. CAMERA USE 3.1 Camera button function
Keep pressing the button for 3 seconds to enter the pairing mode. Quit the pairing mode in 1 minute.
3.2 NIGHT VISION MODE
8

The camera is equipped with 1 pcs high -intensity infrared LED light, which helps to capture clear images in the dark. When the built-in optical sensor detects that the ambient light is weak, the infrared LED will become automatically light up. The
screen of the displayer will be shown in black and white color, and the icon will be displayed in the status bar at the top of the screen.
3.3 INSTALLATION
1 Place the camera at the area you want to monitor.
2 Adjust the camera view angle by turning the camera up, down, left or right
until a satisfactory image is obtained on the displayer.
4. THE DISPLAYER MENU

4.1 INTERCOM MODE

Please press the key if you want to enter the two-way talkback mode, and then you can talk with your little baby. And release the key when the
conversation is over. Meanwhile, the camera system will enter intercom mode after releasing the key of the displayer.
4.2 VOLUME ADJUSTMENT
There are two ways to adjust the volume.
1 In the main interface, short press the key or to adjust volume in a
shortcut way.
2 Or press the key to pop up the menu. Press the key or to choose , and press the key to confirm to enter the volume mode. And then press press or button to adjust volume of the camera. The volume has 6 levels for option.

4.3 FEEDING REMINDER (ALARM)

1Press the key to enter the main menu.

Press the key or to choose , and press the key

2

9

to confirm.

3Press the key or to select the alarm time for the feeding reminder(0.5h 1h 2h 3h 4h). Press the key to return to the previous step.

If the alarm time is set, the displayer will beep every 0.5h/1h/2h/3h/ 4h, and the
flashing feeding mark will appear on the screen. Press any key to cancel feeding reminder.
4.4 LULLABY
1 Press the key to enter the main menu.
2 Press the key or to choose , and press the key to confirm.
3 In the pop-up menu bar, press the key or to select the lullaby, and press the key to confirm. To play all the music in a loop, select and

press the key to confirm. Press the key to return to the previous step.

4.5 SYSTEM TIME SETTING
1 Press the key to enter the main menu.

2 Press the key or to choose , and press the key to confirm. 3 In the pop-

up menu bar, press the key to choose in turn the

hour,minute,second, and press the key or to adjust in turn the hour,minute,second. Press the key to return to the previous step after completing the system time setting.

4.6 TEMPERATURE DISPLAY
1 Press the key to enter the main menu.
2 Press the key or to , and press the key to confirm.
3 In the pop-up menu bar, press the key or button to select or , and press the key to confirm. Press the key to return to the previous step.
10

4 Press the key or in the pop-up bar menu, select and press the key to enter the sub-menu of setting the alarming temperature .

Press the key and to choose to set the high or low warning temperature.

Press the key andto set the temperature value to be warned setting range

28~37 setting range 82~98

. If the current ambient temperature is

higher than the set warning temperature, the system automatically prompts a high

temperature warning.

Do the same to set the low warning temperature setting range 0~26

setting range 32~78 . If the current ambient temperature is lower than the

warning temperature, the system automatically prompts a low temperature

warning.
5 The screen status bar will show the temperature from the temperature sensor at the back of the camera. If the temperature is higher than the high warning

temperature, the temperature reading will become red, and the red mark will

appear on the screen. If the temperature is lower than the low warning temperature, the temperature reading will become blue, and the blue mark will appear. Meanwhile, above or below the set temperature will emit BB.alarm sound, and press any key to cancel BB.sound. If the temperature is not restored to the set temperature range, the BB alarm sound will still be emitted 30 seconds later.

4.7 CAMERA DISPLAY SELECTION

1 Press the key to enter the main menu.

2 Press the key or to choose and then press the key to enter

the sub-menu .

3 Select and press the key to choose or for pairing. After the

pairing is successful, the displayer will show the image from or .

11

4 Select to enter delete mode and then press to delete or . If delete

successfully, no-camera-connection will be reminded.

5 Select , and press the key to see the sub-menu, and choose the or to view the image. Or you can choose to enter cyclic mode, and

the image from the cam1 or cam2 will switch in every 15 seconds.

4.8 VOX SETTING
VOX detection: Turn on the VOX mode, and the display screen will become light off in 30 seconds. When the ambient volume of the camera is louder than the set value, the displayer screen will become light up.
1 Press the key to enter the main menu.
(2)Press the key or , and press to enter mode.
3 Select or press button to turn off VOX mode.
4 Even in the VOX-off mode, short press the key to enter VOX mode in a
shortcut way (the screen will be turned off , but it will keep transferring sound from the camera).
Note: At the status of VOX-off, press the key , and the displayer screen will become light off. The sound from the camera is still heard at any time. This mode is suitable while the baby is playing but the adult needs to leave for a while.
When the VOX mode is turned on, the screen and sound will be turned off in 30 seconds. When the ambient sound of the camera is louder than the set value, the display screen will become light up and the speaker will make a sound. This mode is suitable to use at night.

4.9 DISPLAY BRIGHTNESS
There are two ways to adjust the display brightness.

(1) In the main interface, press the key or to adjust the display brightness in a shortcut way.

12

(2) Press the key to enter the main menu. Press the key and or

press . The mark appear. Press the key

or

display brightness. It has 6 levels.

to choose , to adjust the

5 CAMERAM ZOOM IN
1 Press the key to enter main menu. (2) Press the or , and choose , and then press the key to zoom in and the mark will appear. Press the key again to recover to the original image size.
6. BUTTON SOUND
Pressing the key for 5 seconds on the displayer interface to turn off the button sound. Keep pressing the key again for 5 seconds again to turn on the button sound.
7. POWER LEVEL
The mark shows the current power level. The mark is lower
power level, and will prompt LOW BATTERY. After the 5 consecutive beep sound , the beep sound will disappear, and only keep reminding LOW BATTERY. 8. SIGNAL
(1) Signal mark. If there is a large signal tower base station or high power signal interference equipment in the current environment, it may cause interference to the product, and the mark appears. When the signal has been disconnected for 5 seconds, the mark will appear and flashes, and the monitor will make beep sound for 5 times. After the 5 times of beep sound, the monitor will only leave the mark flashing. Now the monitor is disconnected with the camera.

9. CLEANING
Clean the device with a slightly damp cloth or an antistatic wipe. Never use detergents or abrasive solvents.
13

Cleaning and maintenance Do not use thinner, other solvents or chemicals to clean any part of the product,
which will result in damage to the product. This damage is not covered by the warranty.
Do not expose the product to high temperatures, humidity, or strong sunlight, and do not get it wet.
10. FAQ & TROUBLESHOOTING
1. Q: Why is the signal in the room is bad? A:a. Check if the receiving antenna of the displayer terminal is turned on;
b. Due to different wall materials of different houses, the blocking of 2.4G signals is different. When the signal is not satisfied, the position can be adjusted. 2. Q:Why there is always some noise in the background?
A:It is impossible to eliminate all the noise. This kind of howling has always been a problem in the audio field. Please keep the displayer and the camera separate in
1.5 meters away or more. Tip: The microphone of the receiver and camera cannot be the opposite. That is
the reason why some users get confused when they operate the devices and
always get noise in the background. This phenomenon is an uncontrollable factor.
3.Q:Why the temperature is not precision shown on the screen? A:a. There is a difference in indoor air circulation.
b. The temperature sensor just placed in a new environment, and there will be a deviation within two hours. 4.Q:How to eliminate howling? A:Please keep your receiver and camera separate in 1.5 meters away or more.
Tip: The microphone of the receiver and camera cannot be the opposite. That is the reason why some users get confused when they operate the devices and
always get noise in the background. This phenomenon is an uncontrollable factor.
14

SPECIFIACATION

Technical Parameter

Model

Comfort HD Display size

Monitor Resolution

1080P x 720P

Camera

Sensor

CMOS 1/4

Transmission method

Transmission

View Angle

60 Degree

distance

Temperature

Battery
Monitor power consumption

1500 mAh 1.6W

detection Cry reminder

Camera power consumption
Working
temperature

1.5W
-20 ~65

Lullaby Feeding reminder

Material

ABS Night vision

Monitor N.W

Monitor size

Camera N.W

Camera size

2.8-Inch IPS 1280720P 2.4GHz FHSS
300M(Open Space)
Support
Support
Support
Support Support 88x81x19mm(LWT) 46x46x75mm(LW*T)

15

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>