Danfoss 015G4063 Aveo Remote Sensor Service Kit Installation Guide
- June 13, 2024
- Danfoss
Table of Contents
Danfoss 015G4063 Aveo Remote Sensor Service Kit
Product Information
- Product Name: Service Kit Thermostatic Sensors Series
- Model Number: Code no. 013G1246
Product Usage Instructions
- Installation Guide: Please refer to the user manual for detailed installation instructions.
- Ensure that the product is installed within a range of 0-2m from the desired location.
- To activate the sensor, press the “click” button on the device.
- For maximum performance, set the maximum temperature limit to 4.
- Adjust the desired temperature by following these steps:
- Press the “MAX” button on the device.
- Enter the desired temperature value, for example: MIN = 2.
- Press the “MAX” button again to confirm the setting.
- Product Code: AN447479025494en-000102
- For any further assistance or inquiries, please refer to the user manual or contact our customer support.
Installation
Remote sensor
Temperature Limitation
Temperature Limitation
Blind mark
Installation
ABOUT COMPANY
- DanfossA/5
- Climate Solutions
- danfoss.com
- +45 7488 2222
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>