Danfoss 013G1246 Aveo RA Click Thermostatic Sensor Installation Guide
- June 13, 2024
- Danfoss
Table of Contents
Danfoss 013G1246 Aveo RA Click Thermostatic Sensor
Product Information
The product is a device with code number 013G1246 or 013G1236. It comes with an installation guide that provides step-by-step instructions for setting up and using the product.
Product Usage Instructions
- Follow the installation guide provided with the product.
- Click on the designated areas as indicated in the guide.
- Ensure that the maximum value (MAX) is set to 4. This can be done by following the instructions given in the guide.
- Verify that the maximum value (MAX) is correctly set to 4 by referring to the code number AN447467644489en-000102.
- For minimum value (MIN) settings, follow the instructions in the guide.
- Confirm that the minimum value (MIN) is set to 2 by referring to the code number AN447467644489en-000102.
- The product may have blind marks indicated as “Blind mark Blinde markierung Marque aveugle Marca ciega”
- Pay attention to these marks during installation and usage.
Installation
BIV Installation
Uninstall
Temperature Limitation
Shut of
Theft protection
Theft protection (Removal)
Blind mark
Danfoss A/S
- Climate Solutions
- danfoss.com
- +45 7488 2222
- Cay inges arioripions a vertistles et and whether made viable in writing, orally, attronica dict or sia download sense considered normative, techs data ing fand to manuals, extent serves the right made is putti without notice.
- miss dappies a prot aspired burns deterred proved rais cataliquation be made winduthangats to form, fit or All trademarks in this material are property of Danfoss A/S or Danfoss group companies.
- Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>