Danfoss 015G3637 Regus Herz Thermostatic Sensors Installation Guide
- June 13, 2024
- Danfoss
Table of Contents
Danfoss 015G3637 Regus Herz Thermostatic Sensors
Product Information
This product is an installation guide for a device. It provides instructions on how to install and set up the device correctly. The product is designed to operate within a torque range of 15Nm. It has a maximum setting of 30 and a minimum setting of 12.
Product Usage Instructions
- Start by ensuring you have all the necessary tools and components for installation.
- Set the torque to the desired level by adjusting the settings. The maximum setting is 30 and the minimum setting is 12.
- To increase the torque, turn the adjustment knob clockwise. To decrease the torque, turn it counterclockwise.
- For maximum torque, set the device to MAX. For example, if the desired torque is 4, set MAX = 4
- For minimum torque, set the device to MIN. For example, if the desired torque is 2, set MIN = 2.
- Follow the installation steps provided in the guide to securely install and set up the device.
Note : Make sure to refer to the product manual for any additional instructions or safety precautions specific to your device model.
Installation
Temperature Limitation
Blind mark
Solutions•danfoss.com • +45 7488 2222
Any information, including, but not limited to information on the selection of
the product, its application or use, product design, weight, dimensions,
capacity or any other technical data in product manuals, catalog descriptions,
advertisements, etc., and whether made available in writing. orally,
electronically, online, or via download, shall be considered informative, and
is only binding if and to the extent, explicit reference is made in a
quotation or order confirmation. Danfoss cannot accept any responsibility for
possible errors in catalogs, brochures, videos, and other material. Danfoss
reserves the right to alter its products without notice. This also applies to
products ordered but not delivered provided that such alterations can be made
without changes to the form, fit, Or function of the product. All trademarks
in this material are property Of Danfoss AIS Or Danfoss group companies.
Danfoss and the Danfoss logo are trademarks of Danf055 A’S. A’ rights
reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>