ageLOC LumiSpa Care Set User Manual

June 13, 2024
ageLOC

ageLOC LumiSpa Logo

LumiSpa Care Set

agel OC® LumiSpa® iO is a first-of-its-kind, dual-action skin refining system, delivering dramatic skin renewal and deep cleansing in a single treatment. Use morning and night for glowing results that intensify over time Your softer, smoother skin is just one treatment away.

ageLOC LumiSpa Care Set

CHARGING YOUR AGELOC® LUMISPA®iO

Place the ageL OC LumiSpa iO magnetic charger on your ageLOC LumiSpa iO device untilfully charged.
NOTE: When the device is fully charged, the lights will display green. A full charge willlast at least a week with standard use.

ageLOC LumiSpa Care Set - Charged

CONNECTING YOUR AGELOC® LUMISPA® iO TO THE APP

To unlock the full ageLOC LumiSpa iO experience, download the Nu Skin Vera® app on the App Store or Google Play.

| ageLOC LumiSpa Care Set - Apps 1
---|---
https://apps.apple.com/us/app/nu-skin-vera/id1569408041| https://play.google.com/store/apps/details?id=com.nuskin.vera

App Store andthe Apple logo are trademarks of Apple Inc, registered in the U.S. and other countries and regions.
Google Play and the Google Play logo are trademarks of the Google LLC.

USING YOUR AGELOC® LUMISPA*® iO

STEP 1 Moisten face with water. Apply an ample amount of ageLOC LumiSpa treatment cleanser to all areas of the face, avoiding eyes and lips. STEP 2 Wet treatment head by placing it under running water.

ageLOC LumiSpa Care Set - Agel 1

Press the Power button to start a treatment. Gently glide the treatment head back and forth in slow, broad strokes over one of the areas of your face.

ageLOC LumiSpa Care Set - Power button 1

The device will pause briefly between each of the four zones, and the back indicator lights will progress to prompt you to move to the next area.
If you use a scrubbing motion or press too hard, the device will pause and vibrate to remind you to apply normal pressure and resume slow, broad strokes.
STEP 3 Device will stop after your treatment is complete and will turn off automatically.
STEP 4 Rinse your face and pat dry.

ageLOC LumiSpa Care Set - Power button 2

STEP 5 Remove the treatment head from the device.
Rinse it with water while rubbing to remove residual treatment cleanser. Dry thoroughly. Rinse device under water. Wipe device dry.

ageLOC LumiSpa Care Set - Power button 3

SAFETY AND REGULATORY INFORMATION

  • For full details on safety in the User’s Manual, scan QR code
  • Do not expose ageLOC LumiSpa iO to prolonged heat or cold environments.
  • Place device on a heat-resistant surface when charging
  • Charge battery as soon as low battery is indicated.
  • Do not charge near water. Avoid getting the magnetic charger wet.
  • Do not attempt to service o modify the device.
  • Use only as recommended

FORUSE WITH APOWER ADAPTER WITH THE FOLLOWING RATINGS.
Output: 5VDC – 500 mA
Input: 100 VAC to 240 VAC, 50/60 Hz.
UNITED STATES AND CANADA
Operation is subject to the following:

  1. This device may not cause interference
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

United States: FCC ID: 2AZ3A-LS2F; FCC ID: 2AZ3A-LS2R
Canada: ageL OC LumiSpa (O models LS2R and LS2F comply with
CAN RSS-247/CNR247;1C: 26225-LS2R; IC: 26225-LS2F
This device contains license-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s license-exempt RSSs.
ageLOC LumiSpa iO Magnetic Charger models LS2MCR and LS2MCF comply with CAN RSS-216/CNR-216
AUSTRALIA
©2021,22 NSEPRODUCTS, INC.
75 wesT centersTREET. PROVO, UT 84601
NUSKIN .COM 1-800-4871000
002272 945144931

SCAN CODE TO
VIEW FULL USER’S MANUAL OR TYPE IN YOUR BROWSER:

https://www.nuskin.com/content/dam/qr/io/enus.pdf

Documents / Resources

| ageLOC LumiSpa Care Set [pdf] User Manual
LumiSpa Care Set, Care Set, Set
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals