ventev WRLSPADPLUSVNV Wireless Chargepad User Manual
- June 16, 2024
- ventev
Table of Contents
ventev WRLSPADPLUSVNV Wireless Chargepad
Product Information
Specifications
- Input: DC5V,2.0A DC9V,1.67A
- Dimensions: 90mm x 9.5mm
- Charging distance: 10mm
- Wireless Output: 10W
Product Usage Instructions
Connect to the Power Adapter
- Connect the power adapter to an AC outlet.
- Connect the power adapter to the USB-A to USB-C cable.
- Connect the USB-C end of the cable to the wireless charge pad.
- The LED will flash blue rapidly and then return to off.
Note: Only QC 2.0 and QC 3.0 power adapters support this product’s quick charge function.
Charging Mode
- Ensure the wireless chargepad is plugged in.
- Place the Qi-enabled smartphone on the chargepad, the indicator light will flash blue for 30 seconds. This signals charging has begun.
- The device enters standby mode when the phone is removed from the charging pad.
- A rapidly blinking or red light may indicate there is metal or an obstruction between the charger and the device/phone.
FAQs
- Q: Which devices are compatible with the Ventev wireless chargepad?
- A: The Ventev wireless chargepad is capable of Fast Wireless Charging select devices from Apple, Samsung, Motorola, LG, Sony, and Nokia.
- Q: What type of power adapters support the quick charge function of the chargepad?
- A: Only QC 2.0 and QC 3.0 power adapters support the quick charge function of the Ventev wireless chargepad.
- Q: What should I do if the indicator light on the charge pad is rapidly blinking or red?
- A: If the indicator light on the charge is rapidly blinking or red, it may indicate that there is metal or an obstruction between the charger and your device/phone.
User Manual
Thanks for choosing Ventev! Your new wireless chargepad is capable of Fast
Wireless Charging select devices from Apple, Samsung, Motorola, LG, Sony, and
Nokia. Please read the user manual carefully before using this product to
ensure the optimum performance of your new wireless charge pad. Discover all
of Ventev’s mobile power solutions online at
https://mobileacessories.ventev.com.
Specifications
- Input: DC5V,2.0A DC9V, 1.67A
- Dimensions: 90mm x 9.5mm
- Charging distance: 10mm
- Wireless Output: 10W
Connect to the Power Adapter
- Connect the power adapter to an AC outlet.
- Connect the power adapter to the USB-A to USB-C cable.
- Connect the USB-C end of the cable to the wireless charge.
- The LED will flash blue rapidly and then return to off.
Note: Only QC 2.0 and QC 3.0 power adapters support this product’s quick charge function.
Charging Mode
- Ensure the wireless chargepad is plugged in.
- Place the Qi-enabled smartphone on the chargepad, the indicator light will flash blue for 30 seconds. This signals charging has begun. The device enters standby mode when the phone is removed from the charging pad.
- A rapidly blinking or red light may indicate there is metal or an obstruction between the charger and the device/phone.
Notes
- Do not expose the product to fire or other high-temperature environments. The recommended usage temperature is between 32˚F – 113˚F.
- Stop using if any of the following conditions occur: overheating, colour change, or any other unusual conditions.
- To reduce the risk of electrical shock use only in dry locations. For indoor use only. Never use a product if it is damaged.
- Do not place too close to magnetic strips or chip cards (ID cards, ATM cards, etc.) to avoid magnetic failure.
- Please keep at least a 20cm distance between implanted medical devices (pacemakers, implanted cochlear, etc.) and the wireless charger to avoid potential interference with the medical device.
- Keep out of the reach of children.
- Improper use of this product shall void the manufacturer’s warranty. No liability is accepted for damage.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This Class B device complies with Canadian ICES-3(B)/NMB-3(B).
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CONTACT
- Discover the power of Ventev.
- View all of Ventev’s mobile power
- solutions online at
- www.mobileaccessories.ventev.com.
Manufactured by Ventev®
- ©2018 Ventev
- All rights reserved
- Made in China ventevmobility.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>