Danfoss 80G8527 Programmable Controller Installation Guide
- June 13, 2024
- Danfoss
Table of Contents
80G8527 Programmable Controller
Installation Guide
Programmable controller
Type AS-UI Snap-on
1 danfoss-logo
2. Dimensions
3. Mouting: Replacement of the display/cover with the cover/display
Remove the display/cover as shown in the figure, first lifting the
right side (point 1 in the figure), applying a slight upward force
to overcome the magnetic attraction between the display/cover
and controller and then releasing the left side (point 2 in figure)
Mount the cover/display as shown in the figure, first hooking
the left side (point 1 in the figure) and then lowering the right
side (point 2 in the figure) until the magnetic connection
between the display/cover and controller is established.
4. Technical data
Electrical data
|
Value
---|---
Supply voltage
|
From the main controller
Function data
|
Value
Display
|
• Graphical LCD black and white transmissive
• Resolution 128 x 64 dots
• Dimmerable backlight via software
Keyboard
|
6 keys individually managed via software
Environmental conditions
|
Value
Ambient temperature range, operating [°C]
|
-20 – +60 °C
Ambient temperature range, transport [°C]
|
-40 – +80 °C
Enclosure rating IP
|
IP40
Relative humidity range [%]
|
5 – 90%, non-condensing
Max. installation height
|
2000 m
© Danfoss | Climate Solutions | 2023.10 AN458231127715en-000101 | 1
3. Installation considerations
Accidental damage, poor installation, or site conditions can give rise to malfunctions of the control system, and ultimately lead to a plant breakdown.
Every possible safeguard is incorporated into our products to prevent this. However, a wrong installation could still present problems. Electronic controls are no substitute for normal, good engineering practice.
Danfoss will not be responsible for any goods, or plant components, damaged as a result of the above defects. It is the installer’s responsibility to check the installation thoroughly, and to fit the necessary safety devices.
Your local Danfoss agent will be pleased to assist with further advice, etc.
4. Certificates, declarations, and approvals (in progress)
Mark(1)
|
Country
---|---
CE
|
EU
cURus
|
NAM (US and Canada)
RCM
|
Australia/New Zealand
EAC
|
Armenia, Kyrgyzstan, Kazakhstan
UA
|
Ukraine
(1) The list contains the main possible approvals for this product type. Individual code number may have some or all of these approvals, and certain local approvals may not appear on the list.
Some approvals may be still in progress and others may change over time. You can check the most current status at the links indicated below.
EU declaration of conformity can be found in the QR code.
Information about usage with flammable refrigerants and others can be found in Manufacturer Declaration in the QR code.
© Danfoss | Climate Solutions | 2023.10 AN458231127715en-000101 | 2