RTR-MAX VI-44565 Cordless Drill Instruction Manual

RTR-MAX VI-44565 Cordless Drill

Product Information

The Cordless Drill, Model RTM332, is a versatile power tool designed for drilling in concrete, stone, wood, and steel. It can also be used for light chipping and chiseling applications. The drill features several key components and technical specifications:

• Keyless Chuck: The drill is equipped with a keyless chuck that has a capacity of 10mm (3/8”). It can accept any accessory with a shank diameter not exceeding 10mm.
• Torque Control: The drill has torque control, allowing for precise tightening and loosening of screws and other fixings.
• Reversing Switch: The reversing switch enables forward and reverse operation of the drill.
• Variable Speed Trigger: The drill has a variable speed trigger, providing control over the drilling speed. The speed range is from 0-350r/min to 0-1300r/min.
• Battery Release Button: The drill features a battery release button for easy removal and replacement of the battery pack.
• Battery Pack: The drill is powered by a removable battery pack.
• Gear Selector: The drill has a gear selector for choosing the appropriate gear setting.
• Technical Data: The RTM332 model operates at 12V and delivers a maximum torque of 22NM.

Product Usage Instructions

Before using the Cordless Drill, please read and follow all safety instructions provided in the user manual. Failure to do so may result in electric shock, fire, or serious injury. Here are some important guidelines for using the drill:

• Make sure the voltage of the power source matches the value specified on the drill’s nameplate.
• Inspect the tool and its power connections for any damage before use. Do not connect the plug to the power source when the switch is on.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, and ranges.
• Do not operate the drill in explosive atmospheres where flammable liquids, gases, or dust are present.
• When lending or giving the drill to others, always provide them with the instruction manual.
• For maintenance and cleaning, keep the machine and ventilation slots clean. If the drill fails despite proper care, have it serviced by an authorized customer services agent for RTRMAX power tools?

Charging the Battery:
To charge the battery, follow these steps:

1. Insert the battery pack into the designated slot on the drill.
2. Connect the charger to a power source.
3. Wait until the charging indicator turns green, indicating that the battery is fully charged.

Using the Drill:
To use the drill, follow these steps:

1. Select the desired gear setting using the gear selector.
2. Hold the drill firmly and position it at the desired drilling location.
3. Press and hold the variable speed trigger to start drilling. Adjust the trigger pressure to control the drilling speed.
4. Release the trigger to stop drilling.

Maintenance and Cleaning:
To ensure safe and proper operation, regularly maintain and clean the drill. If any issues occur, have the drill serviced by an authorized customer services agent for RTRMAX power tools.

TOOLS UNITS

1. KEYLESS CHUCK
2. TORQUE CONTROL
3. REVERSING SWITCH
4. VARIABLE SPEED TRIGGER
5. BATTERY RELEASE BUTTON
6. BATTERY PACK
7. GEAR SELECTOR

TECHNICAL DATA

RTM332

• VOLTAGE 12V
• MAX. DRILL BIT 10 MM
• SPEED 0-350 / 0-1300r/min
• MAX. TORQUE 22 NM

USING AREAS

YOUR ‘RTRMAX’ CORDLESS DRILL HAS BEEN DESIGNED FOR DRILLING IN CONCRETE, STONE, WOOD, AND STEEL AND LIGHT CHIPPING AND CHISELING APPLICATIONS.

SAFETY INSTRUCTIONS

Read all instructions failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• The voltage of the power source must agree with the value given on the nameplate of the machine.
• Before using the tool, check the tool and its power connections if there is any management. Don’t connect the plug to a power source when the switch is on.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Extreme temperature differences cause water droplets on power conducting parts. Before switching on the tool, wait tool to get the same temperature working room temperature.
• Use the power tool, accessories tool bits, etc. in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the work conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.
• Fit workpieces and for fitting the workpieces, use clamping equipment or vice.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Losing clothes, jewelry, or long hair can be caught in moving parts.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection are used appropriately.
• When working with the machine, hold it firmly with both hands and provide for a secure stance. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a  cord suitable for outdoor use reduces the risk of electric shock.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite the dust or fumes.
• When the power tool is given to other people, this instruction manual must be given with the power tool.
• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

WARNING : Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

• Keep the tools out of reach of children.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
• Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventative safety measures reduce the risk of starting the power tools accidentally.
• Never use the cord for carrying, pulling or unplugging the power tool.
• Don’t switch off the tool when it is on load.
• Keep the work area clean and well-lit. Cluttered and dark areas invite accidents.
• Avoid the normal body moving when operating the tools.
• Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Avoid stopping very often while working, because it damages the battery.
• Place the battery only 230V AC. Aküyü sadece 230V AC’ ye bağlayın.
• Charge the screwing/drilling battery by only giving the available charger. Vidalama / Delme aküsünü tahsis edilen şarj aleti ile doldurun.
• Battery and screwing/drilling parts must be safe from humidity.
• The tool mustn’t be used when the battery is charging.
• Don’t allow the batteries over 50° temperature because of damaging batteries.

Warning : Don’t make short circuit Battery connections and charger

• Carefully check the anode and cathode when charging.
• Do not throw the batteries to fire.

KEYLESS CHUCK

The keyless chuck fitted to your cordless drill has a capacity of 10mm(3/8’’) and will accept any accessory with a shank diameter not exceeding 10mm. All model have variable speed control and forward and reverse making the drill ideal for tightening and loosening screws and other fixings.

CHARGING THE BATTERY

• Before use, charge the battery for at least 1 hour.
• Remove the battery from the drill by pressing the battery release button on each side of the battery pack.
• Push the battery into the charging base. The battery will only fit into the base in one direction. DO NOT FORCE the battery into the base.
• Plug the adaptor into a suitable mains supply.
• The battery will be fully charged in 1hour.
• Do not take out the battery from the charging base during the charging process till the red light turns to green!

USING THE DRILL

• Push the battery into the bottom of the drill body until it clicks into position.
• The drill is now ready to use.
• The forward/reverse button controls the direction of rotation of the chuck. This has 3 positions. When pushed to the left, the chuck rotates clockwise and when pushed to the right, counterclockwise. When the lever is set in the central position, the trigger switch is locked and the drill cannot be used – use this when storing or transporting the tool.
• Loosen the cuck by holding the back part of the chuck with one hand and turning the front part. Insert the required accessory and tighten using hand pressure only.
• Slide the forward/reverse button to the direction required.
• The drill can now be used by squeezing the trigger switch.
• All models have a variable speed function built into the trigger switch.

TORQUE SETTINGS

Your drill is fitted with a torque-adjusting ring(2). This allows you to set the drill to ‘slip’ at a pre-set torque. This tool has a 23-position torque control and therefore a very precise setting is obtainable.

Mechanical Gear Selection
Two-speed ranges can be preselected with the gear selector:

• 1st gear: Low rotational speed, high power.
• 2nd gear: High rotational speed, low power.

The speed settings may only be changed when the machine is motionless. If the speed setting notches only partially, briefly press the On/Off switch.

MAINTENANCE AND CLEANING

For safe and proper working, always keep the machine and the ventilation slots clean. If the machine should happen to fail despite the care taken in manufacture and testing, repair should be carried out by an authorized customer services agent for RTRMAX power tools.
valerii.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>