KALEVOL 2A99K-1 Professional Weather Station User Manual

KALEVOL 2A99K-1 Professional Weather Station

Functions

• Perpetual Calendar Up to Year 2099
• Day of week in 7 languages: English, German, Italian, French, Spanish, Netherlands and Danish
• Two daily alarms with automatic snooze function (OFF or 5~6omin)
• Temperature:
  • Indoor temperature measurement ranges:0°C (32°F) to 50°C (122°F)
  • Outdoor temperature measurement ranges: -40°C (-40°F) to70°C (158°F)
• Humidity:
  • Indoor and outdoor humidity measurement ranges: 20% to 95%
• Air pressure:
  • Air pressure range: 600 to 1100 hPa (17.72 to 32.48 in Hg or 450 to 825.1 mm Hg)
• Rain :
  • Rain range: 0 to 9999mm (0-393.6 inches)
• Wind:
  • Wind speed range: 0 to 180 km/h (Oto 111 mph)
  • Wind direction range: 0 to 359 degrees
• Multi-combination wireless Outdoor Sensor:
  • 433.92MHz RF transmitting frequency
  • 100 meters (300 feet) transmission range in an open area
• Data record of temperature, humidity, wind speed and rainfall
• Alert of temperature, humidity, wind speed, rainfall
• Display of feels like temperature, wind chill temperature, heat index, dew point temperature
• The weather forecasting function
• 3 levels display backlight
• USB charging port function
  • Power Supply:
  • Weather station:
  • USB power cable: DC5Vl.2A
  • Battery: 2 x LR6 AA 1.5V
  • Multi-combination Wireless Remote Sensor: Battery:3 x LR6 AAA 1.5V

Weather Station Appearance

1. Weather forecast
2. Wind speed
3. Wind direction steering wheel
4. Wind direction or wind top speed of lHr
5. Feels like temperature
6. Daily highest and lowest temperature record
7. Day of the week
8. Calendar
9. Rainfall
10. Outdoor temperature
11. Outdoor humidity
12. Outdoor sensor channel
13. Indoor temperature
14. Indoor humidity
15. Air pressure
16. Time

1. Hanging hole
2. Battery compartment
3. USB charging port
4. Power supply socket
5. Support frame

Multi-combination Wireless Remote Sensor Appearance

1. Solar panel
2. Rain funnel
3. Wind cups
4. Bubble level
5. Temperature I humidity induction box
6. Wind Directional Vane
7. Reset button
8. LED indicator
9. Manual transmit signal button
10. Battery compartment
11. Support rod
12. Fixed base
13. Socket head cap screws
14. Drain vents For rain sensor
15. North direction mark
16. Rain funnel rotation mark
17. Large nut for fixing the support rod and the base

Setup Preparation

• Items you will need to setup your station (not included):

1. Cross-head screwdriver and hex driver for assembly.
2. Fresh Batteries:
3. 2 x AA alkaline or lithium batteries for the weather station.
4. 3 x AA alkaline or lithium batteries for the multi-combination sensor.

Install Multi-combination Wireless Sensor

• Installation method 1 — install on the pole

• Installation method 2 — install on the ground

• Mount in an open area clear for 15 meters {SO feet) in all directions.
• The sensor needs to be mounted on a sturdy platform or bracket that is mounted 1.5 m (5 ft) above the ground.
• The base of the sensor is screwed to the platform and the support frame. Tighten the large nut that secures the support rod to the base
• When installing, adjust the sensor body so that the solar panel faces south, otherwise the wind direction will be wrong. Note the “N” North Embossed Mark on the top of the sensor (requires a compass for proofreading, and the “N” North Emboss mark is identical to the “N” of the compass).
• When installing the sensor, use the top bubble level to ensure the sensor level, otherwise the accuracy of the rainfall reading will be affected.
• After completing the above two steps, lock the two hexagon socket screws on the side of the sensor body.
• When installing, the fixing screws of the wind cup and the wind direction cursor should be tightened and tightened.
• The rainforest structure of the sensor needs to be cleaned regularly (recommended cycle 1-3 months, depending on the frequency of rain):

1. Remove the rainwater funnel (turn the rain sand funnel according to the direction of rotation shown).
2. Gently remove debris or insects from the rain sensor.
3. Remove debris from the rainwater funnel itself, especially debris from the funnel drain.
4. Remove the debris from the drain.
5. Reinstall the rainwater bucket.
6. Note: Do not apply oil to the rain sensor.

• Make sure the wireless sensor is installed within 100 meters of the weather station (empty, unobstructed). According to the thickness of the obstacle between the wireless sensor and the weather station, the distance should be shortened as much as possible (the distance after the wireless signal penetrates the obstacle will be shortened), otherwise the data transmission may be disturbed.

Quick Setup

• Insert 3 x AA batteries into the multi-combination wireless remote sensor
• Then plug the power cord into the weather station and insert 2 AA batteries into the weather station (when the power adapter is unexpectedly powered off, the settings will not be lost)
• Move the remote sensor to outdoor or other location after 5 minutes

Time and unit setting

• Press and hold the button for 3 seconds to enter the time setting mode.
• Brief press the ” or button to adjust the value. Hold the “ or ” button to adjust quickly.
• Press the  button to confirm and proceed to the next item.

1. BEEP ON/OFF
2. Temperature unit: °C I °F
3. Pressure unit: hPa I in Hg I mm Hg
4. Wind speed unit: KM/H I MPH
5. Wind degree (angle) or direction (letter) selection
6. Rainfall unit: MM I inch
7. Hour format: 24Hr I 12Hr
8. Hour
9. Minutes
10. Calendar display format: Month/Date I Date/Month
11. Year
12. Month
13. Date
14. Week display language: a total of seven countries
15. Initialize weather settings

Alarm function turn ON and OFF

• Brief press the button to view the alarm time, press again to view the alarm time. While viewing the alarm time or the alarm time, press button to set current alarm function ON or OFF.
• When the function of alarm clock function is turned ON, the corresponding icon ,, or will displayed.

Alarm and Snooze settings

• Press and hold the button for 3 seconds to enter the alarm and snooze setting mode.
• Brief press the ” ” or “ ” button to set the value. Hold the ” ” or “ ” button to adjust quickly.
• Press the ,, ,, button to confirm and proceed to the next item.

Settings order

1. Alarm 1 minutes
2. Alarm 1 repeat: M-F I S-S I M-S
3. Alarm 1 snooze time: 5 to 60minutes I OFF
4. Alarm 2 hour
5. Alarm 2 minutes
6. Alarm 2 repeat: M-F I S-S I M-S
7. Alarm 2 snooze time: 5 to 60minutes I OFF

• The alarm is repeatedly set to , the alarm function will be activated from Monday to Friday, the Saturday and Sunday will be invalid. The alarm is repeatedly set to , and the alarm function will be activated on Saturday and Sunday, and will expire from Monday to Friday. When the alarm is repeatedly set to display both  and  the alarm function will be activated throughout the week.
• The alarm will sound for 1 minutes if you do not deactivate it by pressing any button. In this case the alarm will be repeated automatically after 24 hours.
• Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is heard.

Switching off the alarm signal

• When the alarm rings, press any buttons except the touch button or touch and hold the  button for more than 3 seoonds to stop the alarm signal.

Snooze function

• When the alarm rings, brief touch once the ,, ,, button, the alarm signal will stops and enter to the snooze mode. The alarm will ring again based on the snooze time you set.
• In snooze mode, press any buttons except the ,, ,, touch button or touch hold down the  ,, touch button for more than 3 seconds to exit the snooze mode

Wireless Sensor Connection

• The weather station can connect up to 1 Multi-combination wireless sensor and 3 different channels of temperature I humidity wireless sensor.(Only one multi-combination wireless sensor included)

• The weather station automatically s,earches for all wireless sensors within 3 minutes of power-on and registers the sensor IDs. Each sensor generates a random ID after power-on to distinguish the sensors.

• In the main display interface, brief press the ,, ,, button to view the value of the wireless sensor on the different channels, the ID number of the wireless sensor will displayed. If you do not buy extra wireless sensor, please keep channel display in OUTDOOR (NOT 1,2 or 3).

• The temperature/humidity data of the additional channel wireless sensor needs to be displayed on the normal time display interface. After selecting the channel in the viewing mode, touch the ,, ,, location button to exit the viewing mode.
  Note: The temperature and humidity values shown in the OUTDOOR column after exit are the selected channels. At the same time, in the channel icon (displaying the position of AlS), the number of channels is
  displayed: OUTDOOR (representing Multi-combination wireless sensor) I 1 or 2 or 3 (representing 3 channels of temperature I humidity wireless sensor))
  Note: When the weather station loses sensor signals or the sensor is not connected to the channel, the value of the channel is displayed as “–“.

• If you need to add a new sensor or replace the sensor. In channel view mode, press and hold the ,, ,, button for more than 3 seconds, the weather station will search for the 3 minute signal again, and the new channel sensor will be added to the weather station within 3 minutes.
  Note: When adding a new sensor or replacing a sensor (old sensor replacement battery), you need to turn on the sensor power first, then follow the steps above to control the weather station.
  Note: When the channel icon (the position of the display AlS) displays the low voltage icon , the battery of the corresponding channel wireless sensor is replaced according to the channel number of the channel icon. Then follow the steps above to re-add the wireless sensor to the weather station.

• In the normal time display interface, press and hold the ,, ,, button for 3 seconds, the wireless channel in the OUTDOOR column will enter the loop mode, and the channel will be changed every 5 seconds (OUTDOOR I CHl I CH2 I CH3), and the automatic conversion display will be different. Channel temperature I humidity value

Temperature I Humidity Readings I History I Trend

• Brief press the ” ” button to view High I Low temperature and humidity and feels like temperature, dew point temperature, heat index, wind chill index.

• In the view High I Low temperature or humidity mode, press and release the “ ” button to switch to view the records of other channels.
  Note: feels like temperature, dew point temperature, heat index and wind chill index is related to the value detected by the multi-combined wireless remote sensor.

• In the mode of viewing temperature I Humidity history, press and hold the ,, ,, button for 3 seconds to clear all history of indoor I outdoor remote temperature I Humidity.
  Note: Indoor I outdoor remote temperature I Humidity reading will reset to current value.
  Note: After 20 seconds without pressing any button or touch the location button at any time to exit the view mode.

• Indoor I outdoor remote temperature I humidity will have trend change tips

  • : Temperature / humidity is rising.
  • : Temperature/humidity drops.

• No display: temperature/humidity remains unchanged.

Wind Readings I History

• In the main display interface, press and hold the  ” button for 3 seconds to convert the display of “wind direction” or “1 hour top speed”.
  Note: WIND SPEED: average speed over the past 30 seconds lHR TOP SPEED: Highest speed in the past hour WIND DIRECTION: In letters or degrees

• The conversion is displayed as a wind direction display or 1 hour top speed can only be operated under the main display interface. T ….)>

• View history: Brief press the button to view the maximum wind history values: 1 Hour (default) I 24 Hour I 7 Days I Month I Year

  • Note: One Hour: past 60 minute period (default Top Speed record, already shown)
  • 24 hour: Past 24 hour period, from last record
  • 7 Days: Past 7-day period, from last record
  • Month: Defined by Calendar Month i.e. January 1 – January 31
  • Year: Defined by Calendar Year i.e. January 1- December 31

• In the mode of viewing wind speed history, press and hold the ,, ,, button for 3 seconds to clear all history of wind speed.

  • Note: Wind speed reading will reset to current wind speed.
  • Note: After 20 seconds without pressing any button or touch the location button at any time to exit the view mode.

Rain Readings I History

• In the main display interface, press ,and hold the ,, ,, button for 3 seconds to convert the display to cumulative value of rainfall or rate of rainfall
  Note: Rainfall: from current to past (1 hour I 24 hours I day I 7 days I month I year I total) total accumulated rainfall

• Rainfall rate: average rainfall over the past 12 hours per hour

• Press and release the  button to view the rain history

• • Note: NOW: cumulative value over the p,ast 30 minutes
  • HOUR: cumulative value over the past 60 minutes
  • 24 HOURS: The cumulative value of the past 24 hours.
  • DAY: 24 hr period from 0:00 – 23:59(12:00am – 11:59pm). Cumulative value with today
  • 7 DAYS: In the past 7 days, the cumulative value of the last record begins
  • MONTH: The cumulative value defined by the calendar month (ie January 1st – January 31st).
  • YEAR: The cumulative value is determined by the calendar year, from January 1 to December 31.
  • TOTAL: The cumulative value of the total run time (no time stamp) since the weather station was started

• In the mode of viewing rain history, press and hold the “ ” button for 3 seconds to clear all history of rain.
  Note: The rain reading will reset to O mm (in).

Note: After 20 seconds without pressing any button or touch the location button at any time to exit the view mode, The weather station will resume normal time display and display the last rainfall record you viewed. When the rain shows the rain rate before entering the observation mode, it still shows the rain rate when returning from the observation mode to the normal time display.

Weather Alerts Viewing and Setting

• Brief press the button to view the weather alerts mode. Continue to press and release the  button to confirm and move to the next item.

  • Note: After 20 seconds without pressing any button or touch the ,, ,, location button at any time to exit the view mode.
  • Note: View Outdoor I REMOTE Temperature I Humidity alert, press and release the ,, ,, button to switch to other channels. (A total of 4 channels: outdoor I CHl I CH2 I CH3)
  • In each weather alert view item, press and hold the ,, ,, button to turn the alert on or off.
    Note: The weather alert is initially turned off by default, and the display is OFF. When the weather alert is turned on, it is displayed as ON.

• Press and hold the  button for 3 seconds to enter the weather alert setting mode.

• Press and release the or  button to adjust the value. Hold the or button to adjust quickly.

• Press and release the button to confirm and move to the next item.

  • Note: After 20 seconds without pressing any button or touch the location button at any time to exit the settings.

Note: Set Outdoor I REMOTE Temperature I Humidity alert, press and release the ,, ,, button to switch to other channels. (A total of 4 channels: outdoor I CHl I CH2 I CH3)

View and Settings order

1. Outdoor I remote high temperature
2. Outdoor I remote low temperature
3. Outdoor I remote high humidity
4. Outdoor I remote low humidity
5. Indoor I remote high temperature
6. Indoor I remote low temperature
7. Indoor I remote high humidity
8. Indoor I remote low humidity
9. High wind speed
10. High 24-hours rainfall
11. High rainfall rate

Weather Alert Trigger

• When armed alert value is reached, station will beep 5 times each minute, until Out of alert range.
• The flashing alert icon will indicate if is a LOW or High alert.
• Press any button to stop the alert sound.
• The alert icon will flash while value is in alert range.

Note: If you want to permanently cancel the alert, enter the weather view mode, switch to the item you want to cancel, press and release the ,, ,, button to set to OFF

Weather Forecast

• The weather station calculates a weather forecast for about the next 12 hours based on the barometric pressure trend. Of course this forecast can’t compare to that of professional weather services supported by satellites and high performance computers, It provides only an approximate indication of the current weather development in a small local area. Please take the weather forecast from your local weather forecasting service into account as well as the forecast from your weather station. If there are discrepancies between the information from your device and from the local weather forecasting service, please take the advice of the latter as authoritative.
• The weather station displays the following weather icon:

Note: The Snowy icon will only appear if the outdoor temperature (refers to the temperature detected by multiple combined sensors) is below -4° C (+25°F) and the forecast would be rainy or Thunder Rainy. The Gale icon will only appear if the wind speed is above S0KM/H and the forecast would be Sunny or Mostly Cloudy or Cloudy. The storm icon will only appear if the wind speed is above S0KM/H and the forecast would be rainy or thunder rain. The Snowstorm icon will only appear if the outdoor temperature (refers to the temperature detected by multiple combined sensors) is below -4°C (+25° F) and the wind speed is above 50 KM / H and the forecast would be rainy or Thunder Rainy.

• After the weather station needs 7-10 days of air pressure calibration, the weather forecast will tend to be stable with an accuracy rate of 70%-75%.
• The weather station can display the barometric pressure trend.
• You may see the following displays:
• : The barometric pressure will rise.
• : The barometric pressure will remain constant .
• : The barometric pressure will fall.

Background Lighting

• If the product is powered by batteries, Touch the location button. Backlight lit 15 seconds.
• When the power supply of the product is inserted into the power supply adapter, the battery will  automatically disconnect the power supply, and the backlight will always be bright. Press the button to adjust the brightness of the backlight, you can adjust the 4 state: 3 different brightness backlight and close the backlight. When the backlight brightness is not at the maximum brightness, press the button. Backlight turns to maximum brightness of 10 seconds.

Low Battery

• If the  “lndoor sensor” column is display the battery icon you need to replace the weather station’s battery as soon as possible.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>