Legrand 829CKAL-3-4BK Omni Box Series Floor Boxes Instruction Manual
- June 13, 2024
- Legrand
Table of Contents
WIREMOLD®
OmniBox Series Floor Boxes
829CKAL-3-4BK Omni Box Series Floor Boxes
Two-gang OmniBox Series Floor Box Installation with an aesthetically pleasing
flush activation cover.
Fully Adjustable, Multiple Service, Floor Boxes OmniBox™ Series Floor Boxes
provides an excellent activation solution when multiple services are required
in open space areas.
OmniBox™ Series Floor Boxes offer one-, two-, and three-gang multi-service
boxes that are fully adjustable before and after the concrete pour.
Available in both stamped steel and cast iron fabrications, they meet a wide
range of workstation requirements for today’s and tomorrow’s service needs.
These floor boxes have many applications, some of which include schools,
financial institutions, and commercial office buildings.
Features & Benefits
-
Fully adjustable box. Fully adjustable both before and after concrete pour. Reduces installation costs.
-
Two Fabrications: Stamped Steel – Lower cost concretetight construction option for above grade applications.
Cast-Iron – Watertight construction for on or below grade applications. -
Available in two depths. Economical alternatives when pour depths are limited.
-
Flush activation assemblies for carpet and tile.
Aesthetically pleasing assemblies are interchangeable in both cast-iron and stamped steel box models. -
Available in one-, two-, and three-gang configurations.
Removable dividers increase capacity. More configurations to support multi- service applications. -
Triple service boxes. Accommodates power, communication and/or audio/video devices which reduces the need for multiple boxes.
-
Brushed aluminum covers for power applications. 830CK Series Aluminum Covers redesigned to accept threaded conduit when passing through power cables.
-
Brass and brushed aluminum covers accept single locking power receptacles. New 828DLR Series provides single flip lid cover.
-
828COMTC Series Cover Kit in brass and brushed aluminum. Allows communication devices to be recessed into 880S and 880CS Series Floor Boxes.
-
Partition support kit for 3-gang tile flanges. The 838TAL-880 Series Flanges provide partition supports in tile applications for added strength and durability.
-
TopGuard protection. All cover assemblies for the OmniBox Floor Box Series have TopGuard protection. An integral design which keeps out water, dirt, and debris from the power and communication compartments.
-
Boxes and covers have been listed by Underwriters Laboratories Inc. to their standard UL514A, 514C, 514D, and Canadian standard C22.2
-
Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point-ofuse. A wide selection of data and adapter options available for use with Ortronics ® TracJack® and Series II devices.
Vertical Markets
- Commercial
- Education
- Government
- Healthcare
- Retail
Download this product’s PEP ecopasport® environmental product declaration at
www.legrand.us/resources-and-downloads.
This declaration conforms with ISO 14025 and 14040 and is in alignment with EN
15804.
Compliance
Metallic Outlet Boxes File E2961, Guide QCIT,
Boxes & Covers UL514A, 514C, 514D & Canadian standard C22.2.
Protection from water, dirt, and debris.
OmniBox Series Stamped Steel Floor Boxes Ordering Information **
**
One-Gang Stamped Steel Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(3) 1/2″ (12.7mm), (5) 3/4″ (19.1mm)
(2) 1″ (25mm)| 53| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: Mexico
Two-Gang Stamped Steel Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(4) 1/2″ (12.7mm), (8) 3/4″ (19.1mm)
(4) 1″ (25mm)| 117
(58/59)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: Mexico
Three-Gang Stamped Steel Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(5) 1/2″ (12.7mm), (11) 3/4″ (19.1mm)
(6) 1″ (25mm)| 180
(56/68/56)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
OmniBox Series Shallow Stamped Steel Floor Boxes Ordering Information
One-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(5) 1/2″ (12.7mm),
(5) 3/4″ (19.1mm)| 37| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: Mexico
Two-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(8) 1/2″ (12.7mm),
(8) 3/4″ (19.1mm)| 80
40/40| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: Mexico
Three-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(11) 1/2″ (12.7mm),
(11) 3/4″ (19.1mm)| 126
39/48/39| 1 3/4″ (44mm)| 1/2″ (12.7mm)
OmniBox Series Cast Iron Floor Boxes Ordering Information
One-Gang Cast Iron Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(4) 1″ (25mm)| 48| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: China
Two-Gang Cast Iron Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(6) 1″ (25mm)| 94
(45/49)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: China
Three-Gang Cast Iron Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(8) 1″ (25mm)| 160
(53/54/53)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
OmniBox Series North America Made Cast Iron Floor Boxes Ordering
Information
North America Made One-Gang Cast Iron Floor Box – Fully Adjustable
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(4) 1″ (25mm)| 48| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
North America Made Two-Gang Cast Iron Floor Box – Fully Adjustable
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(6) 1″ (25mm)| 94
(45/49)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
North America Made Three-Gang Cast Iron Floor Box – Fully Adjustable
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(8) 1″ (25mm)| 160
(53/54/53)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
OmniBox Series Shallow Cast Iron Floor Boxes Ordering Information
One-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(4) 1″ (25mm),| 34| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
Two-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(6) 1″ (25mm),| 76
36/40| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
Three-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
| TECHNICAL SPECIFICATIONS
---|---
Conduit Openings| Cubic Inch
Capacity| Adjustment
Before Pour| Adjustment
After Pour
(8) 1″ (25mm),| 118
39/40/39| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Single-gang stamped steel and triple-gang cast iron models of OmniBox Series Floor Boxes.
| One-Gang Brass Combination Carpet & Tile Flange – Accepts Ortronics® MAB6TJ
TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold
separately.
Country of Origin: China| | Three-Gang Brass Carpet
Flange – For use on 880S3, 880M3, 880CS32-1, and 880CM3-1 Floor Boxes.
Country of Origin: China
---|---|---|---
| Two-Gang Brass Combination Carpet and Tile Flange – AcceptsOrtronics®
MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts,
sold separately.
Country of Origin: China| | One-Gang Brass Tile Flange –
For use on 880S1, 880M1, 880CS1-1, and 880M1-1 Floor Boxes.
Country of Origin: China
| Three-Gang Brass Combination Carpet and Tile Flange – Accepts Ortronics®
MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts,
sold separately.
Country of Origin: China| | Two-Gang Brass Tile Flange –
For use on 880S2, 880M2, 880CS2-1, and 880CM2-1 Floor Boxes.
Country of Origin: China
| One-Gang Brass Carpet Flange –
For use on 880S1, 880M1, 880CS1-1, and 880CM1-1 Floor Boxes.
Country of Origin: China| | Three-Gang Brass Tile Flange –
For use on 880S3, 880M3, 880CS3-1, and 880CM3-1 Floor Boxes.
Country of Origin: China
| Two-Gang Brass Carpet Flange –
For use on 880S2, 880M2, 880CS2-1, and 880CM2-1 Floor Boxes.
Country of Origin: China| |
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum
flanges.
Cover Plates for OmniBox Series Floor Boxes provide access to a wide range of connectivity and are available in both metal and nonmetallic fabrications.
OmniBox Series Floor Boxes Metal Cover Plates Ordering Information
| Brass Duplex Cover Plate – Flip lids. Can also be used with a 106 type
communication adapter.
Country of Origin: China| | Brass Communication Cover
Plate – Data slides. Feed through
only, not for use with a mounting
plate for communication jacks.
Country of Origin: China
---|---|---|---
| Brass GFI Cover Plate – May be used with Activate and Ortronics®
Connectivity Systems in conjunction with 817B, 827B, and 837B Flanges.
Country of Origin: China| | Brass Communication Cover
Plate – 2 5/8″ and 2 1/4″ (67mm
and 57mm) plugs.
Country of Origin: China
| Brass Rectangular Cover Plate – Allows for mounting of a duplex style
receptacle with a rectangular style flip lid cover.
Country of Origin: China| | Brass Communication Cover
Plate – 2 5/8″ and 1″ (67mm and
25mm) plugs.
Country of Origin: China
| Brass Communication Cover Plate – Allows for up to four communication
devices to be mounted in a recessed position within the 880 Floor Box. The
828COM Cover Plate has removable slides for cable egress.
Country of Origin: China
NOTE: For use with 880S and 880CS
Series Boxes only.| | Brass Communication Cover
Plate – 2 5/8″ and 3/4″ (67mm
and 19.1mm) plugs.
Country of Origin: China
| Brass Single Locking Receptacle Cover Plate – Single flip lid cover for 20A
or 30A single locking receptacles. Device opening is 2 5/8″ (67mm). For use
with
maximum female locking device of 1.58″ diameter, and maximum male plug face of
2.25″ diameter.
Country of Origin: China| | Brass Communication Cover
Plate – 2 5/8″ and 1/2″ (67mm and 12.7mm) plugs.
Country of Origin: China
| Brass Duplex Cover Plate – Screw plugs. Screw plugs are 1 1/2″ (38mm) in
diameter.
Country of Origin: China| | A/V Adapter Plate – Sheet metal adapter plate that
accepts two (2) Legrand AVIP devices or two (2) Extron Electronics MAAP style®
device plates (sold separately). For use with 828GFITC or 828GFITCAL cover
plates. (Sold separately)
Country of Origin: USA
OmniBox Series Floor Boxes Brushed Aluminum Cover Plates Ordering
Information
| One-Gang Brushed Aluminum Combination Carpet and Tile Flange – Accepts
Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM
Series inserts, sold separately.
Country of Origin: China
NOTE: Brushed aluminum flanges
come with beveled edges.| | One-Gang Brushed Aluminum Tile Flange – For use on
880S1, 880M1, 880CS1-1, and 880M1-1 Floor Boxes.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.
---|---|---|---
| Two-Gang Brushed Aluminum Combination Carpet and Tile Flange – Accepts
Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM
Series inserts, sold separately.
Country of Origin: China
NOTE: Brushed aluminum flanges
come with beveled edges.| | Two-Gang Brushed Aluminum Tile Flange – For use on
880S2, 880M2, 880CS2-1, and 880CM2-1 Floor Boxes.
Country of Origin: China
NOTE: Brushed aluminum flanges
come with beveled edges.
| Three-Gang Brushed Aluminum Combination Carpet and Tile Flange – Accepts
Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM
Series inserts, sold separately.
Country of Origin: China
NOTE: Brushed aluminum flanges
come with beveled edges.| | Kit – The 838TAL-880 Series flanges provide
additional load support for 3-gang tile flanges.
Kit includes 838TAL Flange and two support dividers.
Country of Origin: USA
NOTE: Order kit for specific box type: 880S3, 880M3, 880CS3, or 880CM3.
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum
flanges.
OmniBox Series Floor Boxes Metal Cover Plates Ordering Information
| Brushed Aluminum Duplex Cover Plate – Flip lids. Can also be used with a
106 type
communication adapter.
Country of Origin: China| | Brushed Aluminum Cover
Plate – Power or communication plate with 2″ (51mm) and 1 1/4″ (32mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
---|---|---|---
| Brushed Aluminum GFI Cover
Plate – May be used with Activate and Ortronics® Connectivity
Systems in conjunction with 817B, 827B, and 837B Flanges.
Country of Origin: China| | Brushed Aluminum Cover
Plate – Power or communication plate with 2″ (51mm) and 1″ (25mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
| Brushed Aluminum Rectangular Cover Plate –
Allows for mounting of a duplex style receptacle with a rectangular style flip
lid cover.
Country of Origin: China| | Brushed Aluminum Cover
Plate – Power or communication plate with 2″ (51mm) and 3/4″ (19.1mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
| Brushed Aluminum Communication Cover Plate – Allows for up to four
communication devices to be mounted in a recessed position within the 880
Floor Box. The 828COMTCAL Cover Plate has
removable slides for cable egress. Country of Origin: China
NOTE: For use with 880S and 880CS
Series Boxes only.| | Brushed Aluminum Cover
Plate – Power or communication plate with 2″ (51mm) and 1/2″ (12.7mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
| Brushed Aluminum Single Locking
Receptacle Cover Plate – Single flip lid cover for 20A or 30A single locking
receptacles. Device opening is 2 5/8″ (67mm). For use with maximum female
locking device of 1.58″ diameter, and maximum male plug face of 2.25″
diameter.
Country of Origin: China| | A/V Adapter Plate – Sheet metal adapter plate that
accepts two (2) Extron
Electronics MAAP style® device plates (sold separately). For use with 828GFITC
or 828GFITCAL cover plates. (Sold separately)
Country of Origin: China
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum
flanges.
OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges Ordering Information
817TCAL-BK
817TCAL-GY
817TCAL-BS
817TCAL-NK
817TCAL-BZ
| One-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange – Accepts
Ortronics®
MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts,
sold separately. Flanges are available in five decorative colors: black, gray
brass,nickel and bronze.
Country of Origin: China| 827TAL-BK
827TAL-GY
827TAL-BS
827TAL-NK
827TAL-BZ
| Two-Gang Powder-Coated
Aluminum Tile Flange – For use on 880S2, 880M2, 880CS2-1, and 880CM2-1 Floor
Boxes. Flanges are available in five decorative colors: black, gray
brass,nickel
and bronze.
Country of Origin: China
---|---|---|---
827TCAL-BK
827TCAL-GY
827TCAL-BS
827TCAL-NK
827TCAL-BZ
| Two-Gang Powder-Coated
Aluminum Combination Carpet and Tile Flange – Accepts Ortronics®
MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts,
sold separately. Flanges are available in five decorative colors: black, gray
brass,nickel and bronze.
Country of Origin: China| 828R-TCALBK
828R-TCALGY
828R-TCALBS
828R-TCALNK
828R-TCALBZ
| Powder-Coated Aluminum
Duplex Cover Plate – Flip lids.
Can also be used with a 106 type communication adapter.
Country of Origin: China
837TCAL-BK
837TCAL-GY
837TCAL-BS
837TCAL-NK
837TCAL-BZ
| Three-Gang Powder-Coated
Aluminum Combination Carpet and Tile Flange – Accepts Ortronics®
MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts,
sold separately. Flanges are available in five decorative colors: black, gray
brass,nickel and bronze.
Country of Origin: China| 828GFITCAL-BK
828GFITCAL-GY
828GFITCAL-BS
828GFITCAL-NK
828GFITCAL-BZ
| Powder-Coated Aluminum
Rectangular Cover Plate – Allows for mounting a duplex receptacle (Decorator
or GFCI style) with a rectangular flip cover
Country of Origin: China
817TAL-BK
817TAL-GY
817TAL-BS
817TAL-NK
817TAL-BZ
| One-Gang Powder-Coated
Aluminum Tile Flange – For use on 880S1, 880M1, 880CS1-1, and 880M1-1 Floor
Boxes. Flanges are available in five decorative colors: black, gray
brass,nickel
and bronze.
Country of Origin: China| 829CKAL-1BK
829CKAL-1GY
829CKAL-1BS
829CKAL-1NK
829CKAL-1BZ
| Powder-Coated Aluminum Cover Plate – Power or communication plate with 2″
(51mm) and 1″ (25mm) plugs. Covers are available in five decorative colors:
black, gray brass,nickel and bronze.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
829CKAL-3/4BK
829CKAL-3/4GY
829CKAL-3/4BS
829CKAL-3/4NK
829CKAL-3/4BZ
| Powder-Coated Aluminum Cover Plate – Power or communication plate with 2″
(51mm) and 3/4″ (19.1mm) plugs. Covers are available in five decorative
colors:
black, gray brass,nickel and bronze.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.| | A/V Adapter Plate – Sheet metal adapter plate that accepts two (2)
Extron
Electronics MAAP style® device plates (sold separately). For use with 828GFITC
or 828GFITCAL cover plates. (Sold separately)
Country of Origin: China
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum
flanges.
OmniBox Series Floor Boxes Nonmetallic Cover Plate Flanges Ordering Information
| One-Gang Nonmetallic Carpet
Flange – Available in black or brown. For Ortronics® connectivity use with
829PFLRT Cover. For Activate connectivity use with 829PFL Cover. Accepts
Ortronics®
MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts,
sold separately.
Country of Origin: Mexico| | Three-Gang Nonmetallic Carpet
Flange – Available in black or brown. For Ortronics® connectivity use with
829PFLRT Cover. For Activate connectivity use with 829PFL Cover. Accepts
Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM
Series inserts, sold separately.
Country of Origin: Mexico
---|---|---|---
| Two-Gang Nonmetallic Carpet
Flange – Available in black or brown. For Ortronics® connectivity use with
829PFLRT Cover. For Activate connectivity use with 829PFL Cover. Accepts
Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM
Series inserts, sold separately.
Country of Origin: Mexico| |
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum
flanges.
OmniBox Series Floor Boxes Nonmetallic Cover Plates Ordering Information
| Nonmetallic Duplex Cover
Plate – Flip lids. Available in black or brown. Can also be used with a 106
type communication adapter.
Country of Origin: USA| | Nonmetallic Communication
Cover Plate – Individual flip lids.
Available in black or brown.
Gasket included. Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters
included.
Country of Origin: USA
---|---|---|---
| Nonmetallic GFI Cover Plate – Available in black or brown.
May be used with Ortronics ® Connectivity systems in conjunction with 817, 827
and 837PCC Series flanges.
Country of Origin: USA| | Nonmetallic Communication
Cover Plate – Breakouts.
Available in black or brown. Feed through only, not for use with a mounting
plate for communication jacks.
Country of Origin: USA
| Nonmetallic Communication
Cover Plate – Individual flip lids. Available in black or brown.
Gasket included. Wiremold CM Series inserts included.
Country of Origin: USA| | Nonmetallic Communication
Cover Plate – Data slides.
Available in black or brown. Feed through only, not for use with a mounting
plate for communication jacks.
Country of Origin: USA
- Replacement flip lids can be ordered under Cat. No. PFL-BLK and PFL-BRN. Each Cat. No. comes with three flip lids.
The above cover plates are listed for tile, terrazzo, and carpet floors.
NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges.
Nonmetallic covers are interchangeable with aluminum flanges.
NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders.
NOTE: The paper used to print this document is an environmentally responsible paper with 10% post consumer waste, with FSC and SFI Chain of Custody certifications, Lacey Act complaint. 100% of the electricity used to manufacture Flo sheets is generated with Green-e certified renewable energy.
Legrand, North America
60 Woodlawn Street
West Hartford, CT 06110
1.877.BY.LEGRAND (295.3472)
www.legrand.us
Canada
905.738.9195
www.legrand.ca
FOLLOW US
ED772R17 — Updated April 2019 — For latest specs visit
www.legrand.us/wiremold
References
- Legrand CA | Delivering and Managing Power, Light, and Data
- Legrand US | Delivering and Managing Power, Light, and Data
- Resources
- Wiremold Wire and Cable Management Products from Legrand