tuya V1 WiFi Door Sensor Instructions
- June 13, 2024
- Tuya
Table of Contents
tuya V1 WiFi Door Sensor
Thanks for Choosing our WiFi Smart Home Sensors
Specifications
Battery: AA LR6 1.5V * 2PCS
Working current: 70mA
Undistributed current: 75mA
Standby current: 5.5uA
Working times: 4000
Storage Temperature: 0℃ ～ 50℃ (32°F～122°F)
Storage humidity: 0% ～ 90%RH(Non condensation)
Bluetooth distribution network: 2.4GHz IEEE801.11b/g/n
Wireless frequency: 2.4GHz Wireless standard: IEEE 802.11b/g/n
Wi-Firangi: 40M Open and close the distance: 18mm
Body size: 82mm x 42mm x 16mm
Magnet size: 82mm x 11mm x 18mm
LED State
| Device Status | LED State |
|---|---|
| Smart Wi-Fi Mode | LED light blinks twice per second |
(Bluetooth network available)
AP Mode| LED light blinks every two seconds
(Bluetooth network available)
Trigger Mode| LED light flashing once
Standby Mode| LED light off
Undistributed Mode| 2mintus
Note:
- Both Smart Wi-Fi mode and AP compatible mode have Bluetooth mode.
- If the device does not enter the pairing mode after the first power-on, then press the reset button for 6 seconds
- When the door status sensor is on or of, the sensor must be triggered after the status is reported. Otherwise, the later triggering information replaces the previous one.
Get Started with Tuya Smart App
Download APP
Download the “Smart life” app from APP Store or Google Play to your mobile.
Register and Login
- Launch the “Smart life” app.
- To register ,enter your mobile phone number or email address ,create a password ,then login to the app.
- Login if you have an account already
Add Device
Wi-Fi Mode(Default)
- If you have not turned on the Bluetooth function of your phone, please add devices manually.
- Select the “+” symbol on the top right-hand corner.
- Click “Add Device”– Add Manually“Plug(BLE+Wi-Fi)” enter Wi-Fi Mode.
Note:
- If the indicator light is of, please press and hold the reset button for 5-7 seconds, then add the device according to the status of the indicator light .
- All Wi-Fi products can be added with any Wi-Fi option, and the device only supports 2.4GHz Wi-Fi signals;
- Here is an example of adding a Plug.
Press the reset button until the device turns into the indicator light blink
quickly , then follow the APP
prompts to add.
Press the reset button until the device turns into the indicator light blink slowly, then follow the APP prompts to add.
Bluetooth Mode
Bluetooth Pairing(Add Automatically)
- Open the “Settings” on your phone and turn on the bluetooth function.
- Then enter the smart life app, the “Devices to be added” window will pop up automatically.
Bluetooth network (Add Manually)
- If it does not automatically pop up, you can add the device by following the steps below.
What’s the App User Interface Like?
Main functions(Working Status, Record and Settings)
Current Status
Display the current on/of status of the door sensor
Open/close prompt
Alerts are updated when the door is opened or closed
APP Record
historical alarm records and linkage record of added devices in the message center can be viewed
Smart(Intelligent linkage)
Smart Scene which can be associated with with, zigbee devices
Setting
Battery level
Display the current power status of the battery
Alarm Set
Door alarm, low battery, closing reminder switch.
Device Settings
Share Device
Remove Device
Clear records; Delete the device through the APP and add the device again to clear the historical record
Push Management
If push is disabled, all devices in the APP will not receive push, but message records will not be at ected.
You can experience more functions of the product with the app, just try and do it yourself.
Notice: Due to the update of the app version, the above interface is for reference only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>