TOYOTA 1706362 Tundra Truck Beds Instructions
- June 13, 2024
- Toyota
Table of Contents
SIDE RAIL CLAMPING FOR THE 2022 AND NEWER TOYOTA TUNDRA W/O DECK RAIL SYSTEM
1706362 Tundra Truck Beds
Clamping Locations and Clamping Procedure.
Begin clamping the driver side rail to the truck bed. Start in the middle and
evenly space 3 clamps along the rail. You should leave approximately 6” on
each end of the rail. Finger tighten the clamps, making sure the teeth
properly engage with the grooves of the side rail.
Tighten all clamps with a 1/2” socket or wrench. Repeat this step for the
passenger side rail.
Make sure all clamps are tightened properly before operating vehicle.
TOOLS REQUIRED:
- 1/2″ wrench orsocket
TOOLS RECOMMENDED:
- Spring clamps
NOTE: The use of spring clamps to hold the side rail in place can assist during the installation process.
Clamping detail shown, adjust clamp up and down as need for level side rail installation.
P/N 1118761 Rev. A
Documents / Resources
|
TOYOTA 1706362 Tundra Truck
Beds
[pdf] Instructions
1706362 Tundra Truck Beds, 1706362, Tundra Truck Beds, Truck Beds, Beds
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>