TOYOTA TKM Innova Hycross Car User Guide

: June 1, 2024
: Toyota

Table of Contents

TOYOTA TKM Innova Hycross Car
DRIVING
WARNING
System Components
- Meter display
- Switches
Using the cruise control
Specifications:
FAQ
- Q: When should I avoid using cruise control?
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TOYOTA TKM Innova Hycross Car

USER GUIDE

DRIVING

Using the driving support systems

Cruise control (Vehicles with Toyota Safety Sense)

A. Set vehicle speed
B. Cruise control indicator

The vehicle can be driven at a set speed even if the accelerator pedal is not depressed. Use the cruise controlonly on highways and expressways.

WARNING

For safe use

Driving safely is solely the responsibility of the driver. Therefore, do not overly rely on this system. The driver is solely responsible forpaying attention to the vehicle’s surroundings and driving safely.
Set the speed appropriately according to the speed limit, traffi c fl ow, road conditions, weather conditions, etc. The driver is responsiblefor confi rming the set speed.

Situations in which cruise control should not be used

Do not use the cruise control in the following situations. As the system will not be able to provide appropriate control, using it may lead to anaccident resulting in death or serious injury.

On roads with sharp bends
On winding roads
On slippery roads, such as those covered with rain, ice or snow
On steep downhills, or where there are sudden changes between sharp up and down gradients
Vehicle speed may exceed the set speed when driving down a steep hill.
When it is necessary to disable the system:(Click Here)

System Components

Meter display

A. Set vehicle speed
B. Cruise control indicator

Switches

A. Driving assist mode select switch
B. Driving assist switch
C. “+” switch / “RES” switch
D. “-” switch
E. Cancel switch

Using the cruise control

Setting the vehicle speed

Press the driving assist mode select switch to select cruise control.
The cruise control indicator will illuminate.
Using the accelerator pedal, accelerate to the desired vehicle speed (approximately 30 km/h [20 mph] or more),and press the driving assist switch to set the set vehicle speed.
The vehicle speed at the moment the switch is released will be the set vehicle speed.

Adjusting the set vehicle speed

Adjusting the set vehicle speed using the switches
To change the set vehicle speed, press the “+” switch or “-” switch until the desired speed is displayed.

1. Increase set vehicle speed2.
2. Decrease set vehicle speed

The set vehicle speed will increase or decrease as follows:

Fine adjustment: By 1 km/h (0.6 mph) or 1 mph (1.6 km/h) each time the switch is pressed
Large adjustment: Increases continuously while the switch is pressed and held

Increasing the set vehicle speed using the accelerator pedal1.
1. Depress the accelerator pedal to accelerate the vehicle to the desired vehicle speed.2.
2. Press the “+” switch.

Canceling/resuming control1

1. Press the cancel switch or driving assist switch to cancel control.
Control will also be canceled if the brake pedal is depressed.

2. Press the “RES” switch to resume control.

Automatic cancellation of the cruise control

In the following situations, the cruise control will be canceled automatically:

When the vehicle speed drops approximately 16 km/h (10 mph) or more below the set vehicle speed
When the vehicle speed drops below approximately 30 km/h (20 mph)
When the brake control or output restriction control of a driving support system operates (For example: PCS, drive-start control)
When the parking brake has been operated

Situations in which some or all of the functions of the system cannot operate:(Click Here)