How to reset the router to factory defaults?
- June 13, 2024
- TOTOLINK
Table of Contents
How to reset the router to factory defaults?
It is suitable for: N100RE, N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N301RT , N300RH, N302R Plus, A702R, A850R, A3002RU
Application introduction:
If you can’t access the router’s setup interface or simply forgot the router’s password, you may reset the current configuration to factory default. There are two ways to.
Method 1
STEP-1:
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP-2:
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.
STEP-3:
Click System- >Save/Reload Settings on the navigation bar on the left.
STEP-4:
Click Reset Settings to Default to reset the router’s configuration.
STEP-5:
Click OK and wait for few seconds to finish resetting.
Method 2
Only by one click on the RST/WPS button
STEP-1:
Press and hold the RST/WPS button for about 10 seconds, until the CPU led blink quickly.
STEP-2:
After nearly 30 seconds, resetting is finished.
DOWNLOAD
How to reset the router to factory defaults – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>