TOTOLINK AC1200 Dual Band Smart Home Wi-Fi Installation Guide
- June 6, 2024
- TOTOLINK
Table of Contents
TOTOLINK AC1200 Dual Band Smart Home Wi-Fi
Hello friend,
Thanks for choosing our Mesh wifi system. Compared with traditional wifi routers and wifi extenders, the Mesh wifi system could provide a whole home coverage with a single wifi name and achieves Seamless Roaming, while you don’t need to switch networks, which is more convenient.
There are 2 using methods:
-
1. Router Mode and Satellites
— This using methods allows that you don’t need existing wifi router at home. You just need to select either of them as master to set as a WiFi Router, then add another one as the satellite, pair with the master device. -
2. AP Mode and Satellites
— If you have an existing wifi router at home, and you just want to use these units to boost the wifi range, then you can select either of them as master device to set as AP mode, and add another one as satellite, pair with the master. You can select the most suitable working method.
How to Set Up the WiFi Router Mode:
- Plug into power, connect the master (through WAN port) with your modem( through LAN Port) via RJ-45 Ethernet cable. (Wait for about 45 seconds, the LED will change from Solid Green to Blinking Green.)
- Connect the wifi signal WiFi_5G_XXXX or WiFi_XXXX on the
- Open the browser on phone or computer and enter into 192.168.188.1, input default password: admin to login.
Quick Setup
Click the Menu, Quick Setup, Next
- Click Connection Type, Select PPPoE, input the User name and Password (Broadband user name and password, which are provided by your network provider.
-
Set Network name and Password for 2.4G and 5G wifi.
-
Set administrator login password.
- Click Done to finish the configuration.
- Add satellite to create whole home mesh wifi system.
After finished the setup of the master wifi router, you can add another unit as the satellite.
Put the satellite within 1 meter of the master and power it on. Wait for about 45 seconds, press the M button on the Master unit for 2 seconds and release it, the indicator LED on the Master device turns orange blinking green.
Wait for about 1 minute, the indicator LED on the Satellite turns orange blinking green, Then wait for about 110 seconds, the LED on the Satellite turns Solid Green. That means pairing successful. You can move the satellite to a suitable location (Within 10 Meters of the Master unit)
AP Mode and Satellite
If you have existing wifi router at home and you just want to add these as
satellites to expand wifi range, then you need to set one unit to AP mode,
then add another one as satellite.
How to Set up the first one?
1~3 Same steps as Router Mode (See setup details from page 2).
- After enter into the setup page, please click Menu – Wireless – Basic, then set the wifi name and password for the Mesh wifi.
- After setup is successful, please add satellite. Same steps as Router mode. (Pls see step 5 on page 5)
Please select the most suitable using method for your home.
If any inquiries about the setup or use, please feel free to contact our professional service team via mail [ help@aigital.com ] anytime and we will solve it for you asap.
Thank you!
Digital Team
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>