BIG ASS FANS UV-C LED Board Instruction Manual
- June 13, 2024
- BIG ASS FANS
Table of Contents
BIG ASS FANS UV-C LED Board Instruction Manual
WARNING: Power must be disconnected before installation and servicing, cleaning, and other user maintenance. Failure to disconnect power creates risk of fi re, electric shock, and serious bodily injury.
WARNING: Skin or eye damage may result from directly viewing ultraviolet
light produced by the lamp in this apparatus. Always disconnect power before
relamping or servicing.
Replace ultraviolet LEDs with Model No. 1050-45-50, manufactured by Big Ass
Fans.
CAUTION: When service or replacement of a component in the fan requires the removal or disconnection of a safety device, the safety device must be reinstalled or remounted as previously installed.
CAUTION: The UV-C LEDs are sensitive to dirt and oils. Wear gloves during installation and do not touch the LEDs. Touching the LEDs could result in reduced LED life.
CAUTION: The Big Ass Fans product warranty will not cover equipment damage or failure that is caused by improper installation or use
Installing boards
Removing boards
Applying UV-C warning labels
Before installing the uplight on the fan, you MUST apply the provided UV-C
warning labels to the underside of the uplight in one of the six locations
shown. Apply all labels containing warnings in your region’s language. If
necessary, place labels overtop of factory-applied labels containing languages
that are not applicable to your region.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>