ENJOYWOOD M4 Fiber Laser Engraver Marking Machine User Manual

ENJOYWOOD M4 Fiber Laser Engraver Marking Machine

Security Statement Before Installation

Before using the laser marking machine, please read this safety guide carefully, it mentions situations that require special attention and includes warnings of unsafe practices that can cause damage to your property or even endanger your personal safety.

1. The product belongs to Class 4 laser products, the laser system itself must meet the requirements of IEC 60825 -1 latest version, otherwise, the product is prohibited to be used.
2. When handling the product you must wear appropriate goggles(OD5+) to protect your eyes from laser light including reflected and stray light.
3. Because cutting burns off the substrate,a high-intensity laser beam generates extremely high temperatures and a lot of heat. Certain materials can catch fire during cutting, creating gases and fumes inside the equipment. A small flame usually appears here when a laser beam hits the material. It will move with the laser and will not stay lit when the laser passes by. Do not leave the machine unattended during the marking process. After use, be sure to clean up the debris, debris, and flammable materials in the marking machine. Always keep an available fire extinguisher nearby to ensure safety. When laser marking machines are used, smoke, vapor, particles, and potentially highly toxic materials (plastics and other combustible materials) are produced from the material. These fumes or air pollutants can be hazardous to health.
4. To prevent accidental disasters such as fire and electric shock, the marking machine provides a power adapter with a ground wire. when using the marking machine, insert the power plug into a power socket with a ground wire.
5. when the marking machine iS working, please make sure that the workplace must be cleaned up , and there should be no flammable and explosive materials around the equipment.

Disclaimer and warning
This product is not a toy and is not suitable for people under 15. This product is a laser device. Please scan the QR Code on the cover to get the complete “User Manual” and the latest instructions and warnings. All information in this material has been carefully reviewed, f there are any typographical errors or misunderstandings in the content, please contact us. Technical improvements (if any) of the product will be added to the new Manual without further notice. The appearance and color of the product are subject to change.

Please be sure to read this document carefully before using the product to understand your legal rights, responsibilities, and safety instructions; Otherwise, it may bring property loss, safety accidents, and hidden danger of personal safety. Once you use this product, you shall be deemed to have understood, and accepted all terms and contents of this document. The user undertakes to be responsible for his or her actions and all consequences arising therefrom. User agrees to use the Product only for legitimate purposes and agrees to the entire terms and contents of this document and any relevant policies or guidelines that Our company may establish.

You understand and agree that Our company may not be able to provide you with damage or accident damage unless you provide the original marking files, configuration parameters of the marking software used, operating system information, videos of the marking process, and operating steps prior to the occurrence of the problem or failure. reasons and to provide you with Our company after-sales service.

Our company is not liable for any and all losses arising from the user’s failure to use the product in accordance with this manual, without the guidance of the company’s technical personnel, users are prohibited from disassembling the machine by themselves. If this behavior occurs, the loss caused by the user shall be borne by the user. Our company has the ultimate right to interpret the document, subject to legal compliance. Our company reserves the right to update, modify, or terminate the Terms without prior notice.

Product Parameters

Detailed Parameters of Machine

Configuration list

Product structure introduction

Introduction to the assembly method of the desktop working mode

Introduction to the assembly method of the hand-held working mode

Common operating procedures of the software

Product-focusing method introduction

1. Put in the marking test paper, turn on the power switch of the machine, and adjust the height adjustment knob so that the two red light spots overlap into one light spot, that is, the focus debugging is completed. Otherwise, continue to adjust.
   Note: If the two light spots do not overlap, the marking effect will be affected when the deviation is small, and the marking machine cannot work when the deviation is large

2. There isa ruler equipped with this machine to measure the distance between the laser head and the engraved object to adjust the focus. The distance between the two is 130mm, because there may be errors in the assembly, please refer to the actual measurement for details.

Software Acquisition and Installation

Method I:

1. Turn on the power of the marking machine and use the data cable to connect the computer where the marking software needs to be installed;
2. Open the attached U-disk on the computer, extract the “BSL engraving software” file to the computer desktop, open the unzipped folder, and send to the desktop shortcut;
3. Install the driver file “Drive\win7win8win 1 0-x64. exe” in the U disk. After successful installation, double-click the desktop shortcut to start the engraving software.

Method II:
In the event that the attached U-disk is lost or the software is deleted by mistake, users can log in to the official website to obtain the software. Installation steps are the same as the method.

Description of Functions of the software

Description of Common Functions Shape Drawing

Text Drawing

1. Click to open the Filling Settings window;
2. There is no need to set other parameters for text carving. Only the “line” needs to be changed. The default value is 0.04.
   Notes: “Line” is the text fling density. The greater the value, the higher the carving speed, the lighter the carving color; the smaller the value, the lower the carving speed, the deeper the carving color; Carving on primary color metal, paint and baking paint, oxidized paint surface, electroplating metal, plastic, leather and other paint materials provide the best effects.

Picture Processing (Portrait/Colored Photo)

(Ordinary Bitmap)

Adjust the picture to a proper size;
Check “Grayscale” and “Fixed DPI” (enter parameter 300 for X and Y) and “Outlets” in the Picture Settings window; Check “Two-way Scanning” in the “Mark Configs” window and enter 0.4 in “Dotting time”; Carving parameter setting. Set “speed(mm/s)” as 500 and “power(%)” as 100.
Notes: Carving on primary color metal, paint and baking paint, oxidized paint surface, electroplating metal, plastic, leather and other paint materials provide the best effects.

Mark Control

1. Click to import vector files in the formats of PLT, DWG and Al;
2. The vector files imported must be filled before carving. There is no need to set other parameters for filling of vector files. Only “line” needs to be changed. The default value is 0.04.

Notes: “Line” is the text filling density. The greater the value, the higher the carving speed, the lighter the carving color; the smaller the value, the lower the carving speed, the deeper the carving color; Carving on primary color metal, paint and baking paint, oxidized paint surface, electroplated metal, plastic, leather and other paint materials provide the best effects.

References of Carving Parameters for Different Materials

FAQ

1. The machine does not respond when powered on.
2. Power connection failure: check the socket, switch and socket on the machine body to ensure that they have been properly plugged and connected to power; check the Power button on the panel to make sure it is pressed and the button light is on.
3. Unable to connect to the computer
4. Not connected to the USB cable: check the computer and machine intertace of the USB cable to ensure that it is properly connected. The USB interface on the front panel of some desktop computers is invalid, so it needs to be connected to the socket at the rear of the host.
5. The driver is not installed properly: install the driver according to the instructions. If the computer identifies the device as a serial port after installation, the hardware connection is OK.
6. Other special cases: disconnect the USB cable and power supply. Atter the equipment is completely powered off for 5 seconds, connect it to the power again.
7. Light carving or no carving
8. Inaccurate focusing: read the focusing section of the Operations Manual for accurate focusing.
9. Carving speed: a result of too high speed or too short a burning time. Read the carving parameters section of the Operations Manual to readjust the parameters.
10. Shallow picture: the imported picture needs to be clear. If the lines too fine and the color is too light, the carving effect will be affected directly.
11. Placement of object: as the laser focal distance is fixed, the object to be carved needs to be flat, parallel to the machine body. If the object to be carved is titled, the focal distance is inaccurate, resulting in an abnormal carving effect.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>