A3002RU Repeater Settings
- June 13, 2024
- TOTOLINK
Table of Contents
A3002RU Repeater Settings
It is suitable for: A702R, A850R, A3002RU
Application introduction:
**** Solution about how to set repeater mode on TOTOLINK products.
Settings
STEP-1:
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP-2:
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.
STEP-3:
Please go to Operation Mode -> Repteater Mode -> wlan 2.4GHz or wlan 5GHz then Click Apply.
STEP-4:
Firstly select Scan , then select host router’s SSID and input Password of the host router’s SSID , then select Change SSID and Possword to input SSID and Possword you want to fill in,then Click Next.
STEP-5:
Then you can change Repeater SSID in 5GHz. As below steps input SSID and Possword you want to fill in to 5GHz,then Click Connect.
PS: After completing the above operation, please re-connect your SSID after 1 minute or so.if the Internet is available it means that the settings are successful.Otherwise,please re-set the settings again
DOWNLOAD
A3002RU Repeater Settings – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>