TECKNET EWM01308 Bluetooth Wireless Alpha Mouse User Manual

June 13, 2024
TECKNET

TECKNET EWM01308 Bluetooth Wireless Alpha Mouse

TECKNET EWM01308 Bluetooth Wireless Alpha Mouse

Package Contents

Button Instructions

  1. Left click button
  2. Scroll wheel
  3. Right click button
  4. DPI Switch button
  5. Indicator light
  6. Forward button
  7. Backward button
  8. On/Off button
  9. Pairing button

SIMPLIFIED EU DECLARATION OF CONFORMIT

Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type EWM01308 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/

Product Parameters

Wireless Version: BT3.0/BT5.0
Battery Type: 2x AA Batteries (not included)
Working Voltage: 3.0V
Working Current: <8mA
Transmission Power: 3dBm

System Requirements

Systems compatible: Windows 2000, 2003, XP, Vista, Win7, Win8, Win8.1, Win10, macOS, Linux
Note: The scroll wheel only works under the operating systems listed above. If you use the mouse under a different operating system, the mouse may either not work or lose its enhanced features.

Bluetooth Pairing

  1. Open the battery cover. Insert the batteries into the compartment, ensuring they correspond with the polarity marking. Replace the battery cover.
  2. Turn on the Bluetooth mode by adjusting the switch under the mouse.
  3. Press the pairing button for 2-3 seconds and the LED indicator will flash. Now the mouse is in pairing mode. The mouse will be detected by your device, then click “Pairing”. It will take a few seconds for pairing. Your device will show “Connected” if successful.
  4. The mouse is equipped with a low power indicator. When the battery power gets low during use, the indicator under the scroll wheel will flash. Please replace the batteries.

DPI Switch: Press the DPI button to cycle through 6 DPI levels.

IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS

  1. SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
  2. Before using the product, read all instructions and caution markings on the product, accessories and device using our product.
  3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  4. Children should be supervised to ensure that they do not play with the appliance.
  5. Keep the product away from fire or explosion may occur.
  6. Do not place the product in or near inflammable, explosive or hazardous object.
  7. Do not place in or near water, rain, excess moisture or extreme heat.
  8. Do not operate the product with damaged cord or plug.
  9. Do not operate the product if it has been damaged in any way.
  10. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
  11. Do not throw or shake the product.

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Shenzhen Unichain Technology Co., Ltd is under license. Other trademarks and trade names are those of their respective owners.

Limited 12-Month Warranty

What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TeckNet product that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.
What will we do to correct problems?
Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TeckNet product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TeckNet product has been improperly installed, altered in any way, or tampered with. The TeckNet Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit TECKNET website or email [email protected] for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

  • Reorient the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment

Correct Disposal of This Product

( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

TECKNET Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

TECKNET User Manuals

Related Manuals