Gooxi RMC2108-670-HS Hot Swap 800W 80 Platinum PSU User Manual

RMC2108-670-HS User’s Manual
Version 1.0

Foreword

This manual is about the installation and use information of RMC2108-670-HS chassis that provided to professional system integrators and personal computer technicians. The installation and maintenance should be conducted by experienced technicians only.

Gooxi RMC2108-670-HS, fourth generation of server chassis is designed based on standard 2U server and can be assembled into common computing server, storage server, Internet cafe server, database server, VOD storage server, HPC server, and so on. The server chassis is different from ordinary desktop chassis that pays more attention to appearance design, as it focuses on the quality and content.The server chassis uses imported first-class SGCC galvanized steel, and possessed with the characteristics of fingerprint resistance, corrosion resistance, heat resistance, heat transfer and thermal reflectivity, formability as well as weldability.

In addition, taking into account the higher stability requirements of the server during usage, this server chassis has excellent heat dispersion. To be specific, the heat dissipation channel is reasonably designed, which can take away a large amount of heat in the chassis to ensure the stable operation of the server.

The scalability is an important factor to determine whether the server chassis design is reasonable. Gooxi RMC2108-670-HS server chassis has stronger scalability than ordinary chassis, such as: hard disk expander, peripheral expander, etc.

Chapter 1 Chassis Overview

1.1 Chassis Structure![Gooxi RMC2108 670 HS Hot Swap 800W 80 Platinum PSU

• Chassis Structure](https://manuals.plus/wp-content/uploads/2023/10/Gooxi- RMC2108-670-HS-Hot-Swap-800W-80-Platinum-PSU-Chassis-Structure.jpg)

⑴ Base
⑵ Rear window
⑶ Ventilation wall| ⑷ Hard disk module
⑸ Front cover
⑹ Upper cover| ⑺ Handle
⑻ Hard drive bracket
⑼ Fan
---|---|---

1.2 Rear Window

① Power site
② I/O washer position
③ Expansion slot

1.3 Materials Package

• 32 pieces of #6-32*5mm countersunk screws are used for fixing hard disks.
• 10 pieces of active studs with the total height of 8mm are used to install the motherboard.
• 16 pieces of #6-32*6mm cross recessed pan head screws are used for fastening the motherboard and power supply.
• 0∼7 SAS – label.
• One 100 120 0.045mm PE valve bag.

1.4 Chassis View
Front view:Rear view:

1.5 Related Indicators of Chassis Panel

The above picture shows the front panel buttons and LED indicators; each button or indicator light has its own function and status description that are described in the following table:

LED Status Description

alarm, power alarm, etc.; the specific can be viewed through IPMI management software
⑥| | The green light is on| Internet access1 connection is normal
⑦| | The green light is on| Internet access2 connection is normal
⑧| | USB interface| 2* USB2.0 interfaces

1.6 Introduction to Hard Disk Indicator

1.7 Introduction to Backplane
The standard configuration of Gooxi backplane model is RMC2108-BP-12G, and the specific description is as follows:

RMC2108-BP-12G

Corresponding site| Interface / jumper / slot| Corresponding site| Interface /jumper / slot
1, 2| 2 * ATX power inputs| 5, 6, 7, 8| Sockets of 4 temperature control fans
3, 4| SFF-8643 12Gb SAS interface| |

1.8 Introduction to the Output Interface of Backplane Hard Disk

Chapter 2 Installation Instruction

2.1 Introduction to the Disassemble Steps of Gooxi 2108 Chassis Cover

1. Unscrew the upper cover screws
2. Press the button of chassis back cover
3. Push the back cover
4. Pull the back cover

2.2 Introduction to the Insert and Plug Steps of Gooxi2108 Chassis Hard Disk

1. Press the button to pull out the hard disk from the hard disk site.
2. Install the 3.5-inch hard drive to the hard drive bracket according to screw holes, as shown in the figure below.
3. The installed hard disk is shown in the following figure:
4. Insert hard disk to the chassis, and close the switch. As shown in the following figure.

2.3 Introduction to the Installation Steps of Gooxi2108 Chassis Power Supply

1. Place the power supply case to the chassis according to the hole site, as shown in the figure below
2. Install the power to the chassis according to the correct position, and then screw on the power supply screws at the position marked below.
3. Fix the power supply bracket, and screw on the screws at the position marked in the figure below.
4. Insert the hot-swap power modules PSU1 and PSU2, respectively
5. The final installation effect of power supply.

2.4 Introduction to the Installation Steps of Motherboard on Gooxi 2108 Chassis

1. Open the chassis, and place insulation pad according to the correct orientation.
   Based on the hole of motherboard screw, motherboard active stud (8mm height) is installed at the corresponding position on the insulation pad. As shown in the figure below:

2. After the motherboard active stud (8mm height) is installed, place the motherboard into the chassis and fasten motherboard screw at the hole site. As shown in the figure below:

2.5 Introduction to the Installation Steps of Expanding Hard Disk on Gooxi 2108 Chassis
2.5.1 Installation Steps of Two 2.5-inch Non-Hot Swap Hard Disks

1. Remove the screws marked at the following figure, lift the upper cover and remove it. As shown in the figure below:
2. Fix the two 2.5 inch hard disks with expandable bracket, respectively
3. The final installation effect is as follows
4. Install the expandable hard disk to the chassis, as shown in the figure below:
5. The final installation effect of expandable hard disk shown in the figure below
6. Restore the front cover when the expandable hard disk is finished installation

2.5.2 Installation Steps of Two Rear 2.5-inch Hot-swap Hard Disks

1. Install 2.5-inch hot-swap hard drive module, as shown in the figure below:
2. Install two 2.5-inch hard drives on the hard disk box, respectively
3. Insert two 2.5-inch hard drives to the rear hard disk module, respectively
4. Finished installation effect is shown as follows:

Note: If customer selects two optional rear 2.5-inch hot-swap hard drives, then CRPS power of Gooxi-style should be equipped with.

Chapter 3 Chassis Parameters

Basic Parameters

Chassis style| Rackmount
Chassis structure| 2U
Applicable motherboard| EEB(1213)/CEB(1210.5)/ATX(129.5)/Micro ATX
Supported motherboard brands| Gooxi, Intel, ASUS, SuperMicro, TYAN, MSI, GIGABYTE and more
Power type| Single power and 1+1 redundant power
Number of supported power supplies| 1
SGPIO| Support
Backplane| 12Gb/s SAS data backplane
Supported hot-swap hard drives| Supportive, compatible with SAS and SATA drives
Supported hot-swap hard fans| Support
Hard driver site| Eight 3.5-inch (or 2.5-inch) hot-swap hard disk sites; one optional 3.5-inch or 2.5-inch non-hot-swap expandable site
I lard disk shockproof system| Hard disk bracket is designed with EMI spring. The unique shockproof fan design can reduce the resonance between the fan and hard disk without affecting the I/O speed of hard disks.
Cooling system| 3 8038 fans are the standard configuration
Windshield| Optional configuration
Intelligent control of temperature| Support
Expanded card site| 7 half-height PCI or PCI-E expansion card slots, and 3 optional transversal full-height expansion card slots
Supported rails| Optional
Apparent Parameters
Front panel interface| 2 USB, 1 power button, 1 restart button, 1 hard disk indicator, I system failure light, 2 network indicators
Free screws dismantle| Support
Fixed mode of cabinet| NomaL
Configuration Parameters
Product material| Imported SGCC (galvanized steel sheet), ABS panel and punching net
Chassis dimension| 67044487.6mm (Depth Width Height)
Chassis weight| 10kg
Package dimension| 902591228mm (Length Width * Height）
Overall gross weight| 12KG
Safety certification| CE, FCC, RoHS

Note: This manual is a general instruction of RMC2108-670-HS series. Specific parameters of each type please refer to the chassis detailed parameters.

Shenzhen Gooxi Information Security Co., Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>