Zip BC20 Home Arc Plus Tap Brushed Nickel Instructions
- June 13, 2024
- Zip
Table of Contents
Zip BC20 Home Arc Plus Tap Brushed Nickel
Product Information
The BKL2 HydroTap G5 v1.10 07.04 BC BC20 is a state-of-the-art water dispensing system that provides instant boiling, chilled, and sparkling water. It is designed for both residential and commercial use and offers advanced features for convenience and efficiency.
- HydroTap Tap options
- HydroTap Arc Plus Tap
- HydroTap Cube Plus Tap
- Ventilation Requirements
Contact your local service provider if ventilation is not suitable.
-
* Clearance Envelope:
Position the Tap and the Command Centre as close together as possible.
- Tap Positioning:
Position the Tap to dispense into the sink, allowing clearance for a cup or teapot. Alternatively, mount it on a Font (available as an accessory).
Product Usage Instructions
- Choose the desired HydroTap Tap option: Arc Plus Tap or Cube Plus Tap.
- Ensure proper ventilation by contacting your local service provider if necessary.
- Position the Tap and the Command Centre as close together as possible within the clearance envelope.
- If required, cut out an air outlet louver in the door/wall towards the top of the cabinet.
- If using a Font, mount the Tap on it following the instructions provided with the accessory.
- Create a cut-out in the cabinet floor for air inlet.
- Refer to the cutting detail diagram for precise measurements and hole placements.
- Connect the IEC Flex & Plug to a 230-240V, 50Hz power outlet.
- Ensure a mains cold water supply is available.
- If necessary, install an isolation valve for the air inlet grille (not supplied).
- Refer to the installation diagrams for further guidance, noting that hoses are not shown to scale and cannot be lengthened.
Clearance envelope
Position the Tap and the Command Centre as close together as possible
HydroTap Tap options
Tap Positioning
Position the Tap to dispense into the sink, allowing clearance for a cup or teapot. Alternatively, mount it on a Font (available as an accessory)
SCALE 1:5
ALL DIMENSIONS IN MM UNLESS OTHERWISE SPECIFIED. INSTALLATION DIAGRAMS ARE FOR
ILLUSTRATIVE PURPOSES ONLY. HOSES ARE NOT SHOWN TO SCALE AND CANNOT BE
LENGTHENED.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>