Zip BCS60 H Home Arc Plus Tap Brushed Nickel Instructions

Zip BCS60 H Home Arc Plus Tap Brushed Nickel

Product Information

• Product Name : BKL2 HydroTap G5
• Version: v1.10 07.04
• Model Options : BCS60, BCS100

Product Usage Instructions

• Ventilation Requirements
  Contact your local service provider if ventilation is not suitable.

• Clearance Envelope
  Position the Tap and the Command Centre as close together as possible.
  Vent tray (kit no. 93540) should not be impeded by pipework.

• HydroTap Tap Options

1. HydroTap Arc Plus Tap
2. HydroTap Cube Plus Tap

• Tap Positioning
  Position the Tap to dispense into the sink, allowing clearance for a cup or teapot. Alternatively, mount on a Font (available as an accessory).

Mixer Tap Options

1. Arc Mixer Tap
2. Vented Arc Mixer Tap (optional)
3. Cube Mixer Tap

Vented Mixer Tap Installation

1. Only cold water supply required.
2. Install a 35mm hole in the sink/benchtop for the mixer tap.
3. Connect the RED marked braided hose to the HydroTap Command Centre MIXER OUT.
4. Connect the BLUE marked braided hose to the HydroTap Command Centre MIXER IN.
5. Connect the WHITE marked braided hose to the HydroTap Command Centre MAINS inlet.
6. Ensure a mains water isolation valve is installed (not supplied).

Booster (BC100 models)
Note: The 500mm braided hoses supplied cannot be lengthened.

Electrical Requirements
IEC Flex & Plug: 230-240V, 10A, 50Hz

Installation Diagrams
Note: Diagrams are for illustrative purposes only. Hoses are not shown to scale and cannot be lengthened.

Ventilation requirements **

**

Contact your local service provider if ventilation is not suitable

• Clearance envelope
  Position the Tap and the Command Centre as close together as possible.

• Vent tray (kit no. 93540)

1. Detail A. Air inlet grille Cut-out in cabinet floor
2. Detail B. Vent Tray air outlet Cut-out in cabinet floor

HydroTap Tap options

• HydroTap Arc Plus Tap
• HydroTap Cube Plus Tap

Mixer Tap options

Vented mixer tap installation

Only cold water supply required

Tap Positioning
Position the Tap to dispense into the sink, allowing clearance for a cup or teapot. Alternatively, mount on a Font (available as an accessory).

SCALE 1:5
ALL DIMENSIONS IN MM UNLESS OTHERWISE SPECIFIED. INSTALLATION DIAGRAMS ARE FOR ILLUSTRATIVE PURPOSES ONLY. HOSES ARE NOT SHOWN TO SCALE AND CANNOT BE LENGTHENED.

HydroTap G5 BCS60 H, BCS100 H

Documents / Resources

| Zip BCS60 H Home Arc Plus Tap Brushed Nickel [pdf] Instructions
BCS60 H, BCS100 H, BCS60 H Home Arc Plus Tap Brushed Nickel, BCS60 H, Home Arc Plus Tap Brushed Nickel, Arc Plus Tap Brushed Nickel, Tap Brushed Nickel, Brushed Nickel, Nickel
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>