N600R Upgrade the software settings

N600R Upgrade the software settings

It is suitable for:  N600R, A800R, A810R, A3100R, T10, A950RG, A3000RU

Application introduction:  Solution about how to upgrade Firewall on the TOTOLINK products

STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

Note: The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

STEP-2:

User Name and Password are required, by default both are  admin  in lowercase letter. Click  LOGIN.

STEP-3: Upgrade the software setting

Please go to  Management  -> Upgrade Firmware page, and check which you have selected.

Select  Check when you can surf the internet or you can click the Upgrade method  and  Select Local files  ,then Click  Upgrade.

Note:

1.DO NOT power off the device curind firmware upgrading.

2.DO Reset the router to factory default settings by RST or RST/WPS button after firmware upgrading fineshed.

STEP-4: System reset

Please go to  System- >Save/Reload Settiings page, and check which you have selected.Then Click  Reset

Or please find the RST bottom in the box and use needle to press down the bottom more than five seconds.

DOWNLOAD

N600R Upgrade the software settings – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>