A950RG WISP Settings
- June 13, 2024
- TOTOLINK
Table of Contents
A950RG WISP Settings
It is suitable for: A800R, A810R, A3100R, T10, A950RG, A3000RU
Application introduction:
WISP mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.
Diagram
Preparation
- Before configuration, make sure that both A Router and B Router are powered on.
- make sure you know the SSID and password for A router
- 2.4G and 5G, you can only choose one for WISP
- move the B router closer to the A router to find the B routing signals better for fast WISP
Feature
1. B router can use PPPOE, static IP. DHCP function.
2. WISP can build its own base stations in public places such as airports, hotels, cafes, teahouses and other places, providing wireless Internet access services.
STEP-1: B-Router Wireless Setup
You need to enter the Advanced Setup page of the router B, then follow the steps illustrated.
① ② set 2.4G network -> ③④ set 5G network
⑤ Click the Apply button
STEP-2: B-Router Repeater Setup
Enter the settings page of the router B, then follow the steps illustrated.
① Click Operation Mode > ② Select WISP Mod e -> ③ Click Next button
④ In next page, you should click Scan 2.4G or Scan 5G
⑤ Choose the WIFI SSID you need to make the WISP
Note: This article set to A router as an example
⑥ Enter the password for the WISP router
⑦ Click connect
STEP-3: B Router Position Display
Move the Router B to a different location for a best Wi-Fi access.
DOWNLOAD
A950RG WISP Settings – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>