N600R repeater settings
- June 13, 2024
- TOTOLINK
Table of Contents
N600R repeater settings
It is suitable for: N600R
Application introduction: Solution about how to set repeater mode on TOTOLINK products.
STEP-1:
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note: The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP-2:
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.
STEP-3:
You need to enter the settings page, then follow the steps illustrated.
① Change SSID and Pasword -> ② Click the Apply button
STEP-4:
Please go to Operation Mode - >Repteater Mode，then Click Next.
STEP-5:
Please go to Wireless - >Repeater Setting page, and check which you have select.
Select Scan and WIFI , then Input Key of the host router’s SSID , then Click Connect.
PS: After completing the above operation, please re-connect your SSID after 1 minute or so.if the Internet is available it means that the settings are successful. Otherwise, please re-set the settings again
DOWNLOAD
N600R repeater settings – [Download PDF]