SSW TP 21 CNC Crosscut Saw Salvador Machine Instructions
- June 13, 2024
- SSW
Table of Contents
Instructions
TP 21 CNC Crosscut Saw Salvador Machine
Safe System of Work
OPERATING AND SAFETY INSTRUCTIONS FOR CNC Crosscut saw (Salvador)
Name: …………………………………………….………….
Training Date:…..…………………………
| Instruction| Understood ✓ or X
---|---|---
1| Explained where on/off and emergency stop switches are located on machine
along with the isolator switch.|
2| Explained that safety equipment must be used at all times and why -goggles.
ear protection and dust extraction must be provided and used|
3| Explained how to calibrate/Zero offset the machine|
4| Explained why the CNC Salvador machine is not to be left running when
unattended.|
5| Explained why we use safety guards and how they should be set|
6| Explained why the area around the Salvador machine should be kept clear at
all limes.|
7| Explained why we don’t wear loose clothing when operating the Salvador
machine|
8| Explained the use of correct manual handling techniques at all times. i.e.,
Explained how to lift limber and place it on CNC Salvador machine where not to
put fingers etc.|
9| Explained why the blade is to be sharp and of correct size. secure and
correctly adjusted.|
10| Explained that only trained personnel can change blades or carry out minor
maintenance.|
11| Explained that any maintenance/cleaning to be done only when machine is
switched off by the isolator switch. Using a lock out method.|
12| Do not operate machine with faulty guards or safety devices.|
13| Explained how to run machine using the computer|
14| Explained that only trained personnel are to programme the machine. Once
their supervisor/manager is confident they can do it without risk or injury.|
15| Please note entering commands on a CNC machine could have serious
consequences, you must be sure and pay attention to the command you are
entering.|
16| When cleaning the CNC Salvador Machine safety equipment must always be
always used and why? — goggles and mask must be provided and used.|
17| Explained that only trained and authorised personnel are to use this
machine.|
18| If senior staff have concerns on your ability to run a machine, you could
be stopped from working it and provided with additional training if required.|
I have received the above training and fully understand every point that was
explained to me. I confirm that I will wear the required PPE equipment when
using the above machinery and take all steps to ensure my own safety. I will
ask for further training if I need to and will immediately inform the
Supervisor or Manager if there are any issues with the machinery.
Name: ……………………………
Signed: ……………………………
Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully
understand how to use the above machinery, have received the required PPE
equipment and know to inform me immediately of any issues with the machinery
or if they require further training. I authorise this person to use the
machinery detailed above.
Name: …………………………(Authorised Trainer)
Signed ……………………………
Date: ……………………………