N200RE WISP settings

N200RE WISP settings

 It is suitable for:   N100RE, N150RT, N200RE, N210RE, N300RT, N302R Plus

Application introduction:

WISP mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.

Diagram

Preparation

•  Before configuration, make sure that both A Router and B Router are powered on.
•  make sure you know the SSID and password for A router
• move the B router closer to the A router to find the B routing signals better for fast WISP

Feature

1. B router can use PPPOE, static IP. DHCP function.

2. WISP can build its own base stations in public places such as airports, hotels, cafes, teahouses and other places, providing wireless Internet access services.

Set up steps

STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click Login.

STEP-3:

Please go to  Operation Mode - >WISP Mode->Click  Apply.

STEP-4:

Select WAN Type(PPPOE,Static IP,DHCP).Then Click  Next.

STEP-5:

Firstly select  Scan  , then select  host router’s SSID  and input Password  of the  host router’s SSID , then Click  Next.

STEP-6:

Then you can change SSID in as below steps ,input  SSID  and  Possword you want to fill ,then Click  Connect.

PS: After completing the above operation, please re-connect your SSID after 1 minute or so.if the Internet is available it means that the settings are successful. Otherwise, please re-set the settings again

Questions and answers

Q1: How do I reset my router to factory settings?

A: When turning on the power, press and hold the reset button (reset hole) for 5~10 seconds. The system indicator will flash quickly and then release. The reset was successful.

DOWNLOAD

N200RE WISP settings – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>