A800R IPV6 function settings

A800R IPV6 function settings

It is suitable for:  A800R

Application introduction:  This article will introduce the configuration of IPV6 function and will guide you to configure this function correctly.In this article, we will take A800R as an example.

Note:

Please make sure that you are provided IPv6 internet service by your internet provider. If not, please contact with your IPv6 internet provider first.

STEP-1:

Make sure you have set up an IPv4 connection either manually or by using the Easy Setup wizard before setting up an IPv6 connection.

STEP-2:

Connect your computer to the router by cable or wireless, enter http://192.168.0.1

STEP-3:

Please go to  Network - >WAN setting. Select  WAN Type  and configure the IPv6 parameters(here is PPPOE as an example). Click  Apply.

STEP-4:

Switch to the IPV6 configuration page.  Enable  IPv6, and configure the IPv6 parameters(here is PPPOE as an example). Click  Apply.

Finally in the status bar page to see if you get the IPV6 address.

DOWNLOAD

A800R IPV6 function settings – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>