AEG IKB64413FB Induction Hob User Manual

User Manual
Hob

 IKB64413FB Induction Hob

FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website to:

 Get usage advice, brochures, trouble shooter, service and repair information:www.aeg.com/support
 Register your product for better service: www.registeraeg.com
 Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop

CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
 Warning / Caution-Safety information
 General information and tips
 Environmental information

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
• Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
• Do not let children play with the appliance.
• Keep all packaging away from children and dispose of it appropriately.
• WARNING:  Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts become hot during use.
• If the appliance has a child safety device, it should be activated.
• Children shall not carry out cleaning and user maintenance of the appliance without supervision.

1.2 General Safety

• WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.

• WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.
  CAUTION: The appliance must not be supplied through anexternal switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.

• CAUTION: The cooking process has to be supervised. Ashort term cooking process has to be supervised continuously.

• WARNING: Danger of fire: Do not store items on the cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.

• Do not use the appliance before installing it in the built-in structure.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and do not rely on the pan detector.

• If the glass-ceramic surface/glass surface is cracked, switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply. In either case contact the Authorised Service Centre.

•  If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.

SAFETY INSTRUCTIONS

2.1 Installation

WARNING!
Only a qualified person must install this appliance.
WARNING!
Risk of injury or damage to the appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with the appliance.

• Keep the minimum distance from other appliances and units.

• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to prevent moisture from causing swelling.

• Protect the bottom of the appliance from steam and moisture.

• Do not install the appliance next to a door or under a window. This prevents hot cookware from falling from the appliance when the door or the window is opened.

• Each appliance has cooling fans on the bottom.

• If the appliance is installed above a drawer:
  – Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system.
  – Keep a distance of minimum 2 cm between the bottom of the appliance and parts stored in the drawer.

• Remove any separator panels installed in the cabinet below the appliance.

2.2 Electrical Connection

WARNING!
Risk of fire and electric shock.

• All electrical connections should be made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation makesure that the appliance is disconnected from the power supply.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable tangle.
• Make sure that a shock protection isinstalled.
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
• The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

2.3 Use
WARNING!
Risk of injury, burns, and electric shock.

• Remove all the packaging, labelling and protective film (if applicable) before first use.

• This appliance is for household use only.

• Do not change the specification of this appliance.

• Make sure that the ventilation openings are not blocked.

• Do not let the appliance stay unattended during operation.

• Set the cooking zone to “off” after each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on the cooking zones. They can become hot.

• Do not operate the appliance with wet hands or when it has contact with water.

• Do not use the appliance as a work surface or as a storage surface.

• If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock.

• Users with a pacemaker must keep a distance of a minimum 30 cm from the induction cooking zones when the appliance is in operation.

• When you place food into hot oil, it may splash.
  WARNING!  Risk of fire and explosion

• Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.

• The vapors that very hot oil releases can cause spontaneous combustion.

• Used oil, which can contain food remnants, can cause fire at a lower temperature than oil used for the first time.

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
  WARNING!  Risk of damage to the appliance.

• Do not keep hot cookware on the control panel.

• Do not put a hot pan cover on the glass surface of the hob.

• Do not let cookware boil dry.

• Becareful not to let objects or cookware fall on the appliance. The surface can be damaged.

• Do not activate the cooking zones with empty cookware or without cookware.

• Do not put aluminum foil on theappliance.

• Cookware made of cast iron, aluminum or with a damaged bottom can cause scratches on the glass / glass-ceramic. Always lift these objects up when you have to move them on the cooking surface.

• This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

2.4 Care and cleaning

• Clean the appliance regularly to prevent the deterioration of the surface material.
• Switch off the appliance and let it cool down before cleaning.
• Do not use water spray and steam to clean the appliance.
• Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

2.5 Service

• To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

2.6 Disposal

WARNING! Risk of injury or suffocation.

• Contact your municipal authority for information on how to discard the appliance correctly.
• Disconnect the appliance from the main supply.
• Cut off the mains electrical cable close to the appliance and dispose of it.

INSTALLATION

WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the information below from the rating plate. The rating plate is on the bottom of the hob.
Serial number ………………………
3.2 Built-in hobs
Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards.
3.3 Connection cable

• The hob is supplied with a connection cable.
• To replace the damaged mains cable, usethe cable type: H05V2V2-F which withstands a temperature of 90 °C or higher. Speak to your local Service Centre.

3.4 Assembly
If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances.If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process.

www.youtube.com/electrolux
www.youtube.com/aeg

How to install your AEG Induction Hob – Worktop installation|
---|---

PRODUCT DESCRIPTION

4.1 Cooking surface layout

1. 1. Induction cooking zone

2. Control panel

4.2 Control panel layout

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.

1 |   Sensor field
| Function| Comment
---|---|---|---
 2| | ON / OFF| To activate and deactivate the hob.
 3| | Lock / Child Safety Device| To lock/unlock the control panel.
 4| | Pause| To activate and deactivate the function.
 5|   –| Timer indicators of cooking zones | To show for which zone you set the time.
 6| –| Timer display| To show the time in minutes.
 7| | Hob²Hood| To activate and deactivate the manual mode of the function.
 8| | –| To select the cooking zone.
 9| | –| To increase or decrease the time.
 10| P| PowerBoost| To activate the function.
 11| –| Control bar| To set a heat setting.

4.3 Heat setting displays

warm/resid‐
ual heat.
| Lock / Child Safety Device operates.
**| Incorrect or too small cookware or no cookware on the cooking zone.
–**| Automatic Switch Off operates.

4.4 OptiHeat Control (3 step Residual heat indicator)

  WARNING!
 There is a risk of burns from residual heat.
The indicators show the level of the residual heat for the cooking zones you are currentlyusing. The indicators may also come on for the neighboring cooking zones even if you are not using them.
The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass-ceramic is heated by the heat of the cookware.

DAILY USE

WARNING! Refer to Safety chapters.
5.1 Activating and deactivating
Touch  for 1 second to activate or deactivate the hob.

5.2 Automatic Switch Off
The function deactivates the hob automatically if:

• all cooking zones are deactivated,
• you do not set the heat setting after you activate the hob,
• you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the controlpanel.
• the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again.
• you use incorrect cookware. The symbol   comes on and the cooking zone deactivates automatically after 2 minutes.
• you do not deactivate a cooking zone or change the heat setting. After some  –  time comes on and the hob deactivates.

The relation between the heat setting and the time after which the hob deactivates:

5.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting or move your finger along the control bar until you reach the correct heat setting.

5.4 Using the cooking zones
Place the cookware in the centre of the selected zone. Induction cooking zones adapt to the dimension of the bottom of the cookware automatically.
5.5 Automatic Heat Up
Activate this function to get a desired heat setting in a shorter time. When it is on, the zone operates on the highest setting in the beginning and then continues to cook at the desired heating setting.

 To activate the function the cooking zone must be cold.
To activate the function for a cooking
zone: touch  P  (   comes on). Immediately touch a desired heat setting. After 3 seconds  comes on.
To deactivate the function: change the heat setting.
5.6 PowerBoost
This function makes more power available to the induction cooking zones. The function can be activated for the induction cooking zone only for a limited period of time. After
this time the induction cooking zone automatically sets back to the highest heat setting.

Refer to the “Technical data” chapter.
To activate the function for a cooking
zone:  touch  P  comes on.
To deactivate the function:  change the heat setting.

5.7 Timer
• Count Down Timer
You can use this function to set the length of a single cooking session.
First set the heat setting for the cooking zone, then set the function.
To set the cooking zone:  touch  repeatedly until the indicator of a cooking zone appears.
To activate the function : a touch  of the timer to set the time (00 – 99 minutes). When the indicator of the cooking zone starts to flash, the time counts down.
to set the cooking zone. The indicator of the cooking zone starts to flash. The display shows the remaining time.
To see the remaining time : touch  to set the cooking zone. Touch
To change the time:  touch  +  or_
To deactivate the function: touch  to set the cooking zone and then touch . The remaining time counts down to 00. The indicator of the cooking zone disappears.

 When the countdown ends, an  acoustic signal sounds and 00 flashes. The cooking zone deactivates.
To stop the sound:  touch

• CountUp Timer
You can use this function to monitor how long the cooking zone operates.
To set the cooking zone: touch
repeatedly until the indicator of a cooking zone appears.
To activate the function:  a touch  of the timer.
appears. When the indicator of the cooking zone starts to flash, the time counts up. The display switches between and the counted time (in minutes).
To see how long the cooking zone operates:  touch  to set the cooking zone.
The indicator of the cooking zone starts to flash. The display shows how long the zone operates.
To deactivate the function:  touch  and then touch +or _The indicator of the cooking zone disappears.

• Minute Minder
You can use this function when the hob is activated and the cooking zones do not operate. The heat setting display shows
To activate the function:  touch   and then touch +or _ of the timer to set the time. When the time finishes, an acoustic signal sounds and 00 flashes.

To stop the sound:  touch
The function has no effect on the operation of the cooking zones.
5.8 Pause
This function sets all cooking zones that operate to the lowest heat setting.
When the function operates, all other symbols on the control panels are locked.
The function does not stop the timer functions.

Touch   to activate the function  comes on. The heat setting is lowered to
To deactivate the function, touch  The previous heat setting comes on.

5.9 Lock
You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch   comes on for 4 seconds. The Timer stays on.
To deactivate the function:  touch    The previous heat setting comes on.
 When you deactivate the hob, you also deactivate this function.

5.10 Child Safety Device
This function prevents an accidental operation of the hob.
To activate the function:  activate the hob with  Do not set any heat setting. Touch comes on. Deactivate the hob with  for 4 seconds . comes on. Deactivat the hob with

To deactivate the function:  activate the hob with  Do not set any heat setting. Touch comes on. Deactivate the hob with  for 4 seconds  comes on. Deactivate the hob with

To override the function for only one
cooking time:  activate the hob with  .  comes on. Touch  for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you deactivate the hob with   the function operates again.

5.11 OffSound Control (Deactivating and activating the sounds)

Deactivate the hob. Touch   for 3 seconds. The display comes on and goes out. Touch for  3 seconds. or comes on. Touch  the timer to choose one  +  of the following:

• ****the sounds are off
• ****the sounds are on

To confirm your selection wait until the hob deactivates automatically.

When the function is set to ****you can hear the sounds only when:

• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.

5.12 Power management

• Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration.
• Each phase has a maximum electricity loading of 3700 W.
• The function divides the power between cooking zones connected to the same phase.
• The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3700 W.
• The function decreases the power to the other cooking zones connected to the same phase.
• The heat setting display of the reducedzones alternates between the chosen heat setting and the reduced heat setting. After some time the heat setting display of the reduced zones stays on the reduced heat setting.

5.13 Hob²Hood
It is an advanced automatic function that connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. Speed of the fan is defined automatically on basis of the mode setting and the temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually.

**** For most of the hoods, the remote system is originally deactivated. Activate it before you use the function. For more information refer to hood user manual.

Operating the function automatically To operate the function automatically set the automatic mode to H1 – H6. The hob is originally set to H5. The hood reach whenever you operate the hob. The hob recognizes the temperature of the cookware automatically and adjusts the speed of the fan.

Automatic modes

| Automatic light
| Boiling1)| Frying2)
---|---|---|---
Model H0| Off| Off| Off
Model H1| On| Off| Off
Model H2 3)| On|  Fan speed  1| Fan speed 1
Model H3| | Off| Fan speed 1
Model H4| On| Fan speed 1| Fan speed 1
Model H5| On| Fan speed 1| Fan speed 2
Model H6| On| Fan speed 2| Fan speed 3

1. The hob detects the boiling process and activates fan speed in accordance with automatic mode.
2. The hob detects the frying process and activates fan speed in accordance with automatic mode.
3. This mode activates the fan and the light and does not rely on the temperature.

Changing the automatic mode

1. Deactivate the appliance.
2. Touch  for 3 seconds. The display comes on and goes off.
3. Touch   for 3 seconds.
4.  Touch  a few times until  comes on.
5. Touch  +  the Timer to select an automatic mode.

 To operate the hood directly on the hood panel deactivate the automatic mode of the function.
 When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from accidental activation of the fan for the next 30 seconds.

Operating the fan speed manually
You can also operate the function manually. To do that touch   when the hob is active. This deactivates the automatic operation of the function and allows you to change the fan speed manually. When you press  you to raise the fan speed by one. When you reach an intensive level and press   again you will set fan speed to  hich deactivates the hood fan. To start the fan again with fan speed 1 touch
 To activate the automatic operation of the function, deactivate the hob and activate it again.

Activating the light
You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 – H6.
 The light on the hood deactivates 2 minutes after deactivating the hob.

HINTS AND TIPS

WARNING!
Refer to Safety chapters.

6.1 Cookware
For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly.
 Use the induction cooking zones with suitable cookware.

• The bottom of the cookware must be as thick and flat as possible.
• Ensure pan bases are clean and dry before placing on the hob surface.
• In order to avoid scratches, do not slide or rub the pot across the ceramic glass.

Cookware material

• correct: cast iron, steel, enameled steel, stainless steel, multi-layer bottom (with a correct marking from a manufacturer).
• not correct: aluminum, copper, brass, glass, ceramic, porcelain.

Cookware is suitable for an induction hob if:

• water boils very quickly on a zone set to the highest heat setting.
• a magnet pulls on to the bottom of the cookware.

Cookware dimensions

• Induction cooking zones adapt to the dimension of the bottom of the cookware automatically.
• The cooking zone efficiency is related to the diameter of the cookware. The cookware with a diameter smaller than the minimum receives only a part of the power generated by the cooking zone.
• For both safety reasons and optimal cooking results, do not use cookware larger than indicated in the “Cooking zones specification”. Avoid keeping cookware close to the control panel during the cooking session. This might impact the functioning of the control panel or accidentally activate hob functions.

Refer to “Technical data”.

6.2 The noises during operation If you can hear:

• crack noise: cookware is made of different materials (a sandwich construction).
• whistle sound: you use a cooking zone with a high power level and the cookware is made of different materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.

The noises are normal and do not indicate any malfunction.

6.3 (Eco Timer)
To save energy, the heater of the cooking zone deactivates before the count- down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation.

6.4 Examples of cooking applications
The correlation between the heat setting of a zone and its consumption of power is not linear. When you increase the heat setting, it is not proportional to the increase in the consumption of power. It means that a cooking zone with a medium heat setting uses less than half of its power.

 The data in the table is for guidance only.

through the procedure.
5 – 7| Steam vegetables, fish, and meat.| 20 – 45| Add a couple of tablespoons of liquid.
7 – 9| Steam potatoes.| 20 – 60| Use max. ¼ l of water for 750 g of potatoes.
7 – 9| Cook larger quantities of food, stews, and soups.| 60 – 150| Up to 3 l of liquid plus ingredients.
9 – 12| Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts.| as necessary| Turn halfway through.
12 – 13| Heavy fry, hash browns, loin steaks, steaks.| 5 – 15| Turn halfway through.
14| Boil water, cook pasta, sear meat (goulash, pot roast), and deep-fry chips.
P| Boil large quantities of water. PowerBoost is activated.

6.5 Hints and Tips for Hob²Hood
When you operate the hob with the function:

• Protect the hood panel from direct sunlight.
• Do not spot a halogen light on the hood panel.
• Do not cover the hob control panel.
• Do not interrupt the signal between the hob and the hood (e.g. with the hand, a cookware handle, or a tall pot). See the picture.
  The hood in the picture is only exemplary.

Other remotely controlled appliances may block the signal.
Do not use any such appliances near to the hob while Hob²Hood is on.

Cooker hoods with the Hob²Hood function
To find the full range of cooker hoods that work with this function refer to our consumer website. The AEG cooker hoods that work with this function must have a symbol .

CARE AND CLEANING

WARNING!
Refer to Safety chapters.

7.1 General information

• Clean the hob after each use.
• Always use cookware with a clean base.
• Scratches or dark stains on the surface have no effect on how the hob operates.
• Use a special cleaner suitable for the surface of the hob.
• Use a special scraper for the glass.

7.2 Cleaning the hob

• Remove immediately:  melted plastic, plastic foil, sugar, and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface.
• Remove when the hob is sufficiently cool:  limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth.
• Remove shiny metallic discoloration:  use a solution of water with vinegar and clean the glass surface with a cloth.

TROUBLESHOOTING

  WARNING!
Refer to Safety chapters.

8.1 What to do if…

correctly connected to the electrical supply.
| The fuse is blown.| Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.
| You do not set the heat setting for 10 seconds.| Activate the hob again and set the heat setting in less than 10 seconds.
| You touched 2 or more sensor fields at the same time.| Touch only one sensor field.
| Pause operates.| Refer to “Daily use”.
| There are water or fat stains on the control panel.| Clean the control panel.
An acoustic signal sounds and the hob deactivates.
An acoustic signal sounds when the hob is deactivated.| You put something on one or more sensor fields  .| Remove the object from the sensor fields.
The hob deactivates.| You put something on the sensor field 0.| Remove the object from the sensor field.
The residual heat indicator does not come on.| The zone is not hot because it operated only for a short time or the sensor is damaged.| If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre.
Hob2Hood does not work.| You covered the control panel.| Remove the object from the control panel.
| You use a very tall pot which blocks the signal.| Use a smaller pot, change the cooking zone or operate the hood manually.
Automatic Heat Up does not operate.| The zone is hot.| Let the zone become sufficiently cool.
| The highest heat setting is set| The highest heat setting has the same power as the function.
The heat setting changes be- tween two levels.| Power management operates.| Refer to “Daily use”.
The sensor fields become hot.| The cookware is too large or you put it too near to the controls.| Put large cookware on the rear zones, if possible.
There is no sound when you touch the panel sensor fields.| The sounds are deactivated.| Activate the sounds. Refer to “Daily use”.
 comes on.| Child Safety Device or Lock operates.| Refer to “Daily use”.
 comes on.|  There is no cookware in the zone.| Put cookware on the zone.
| The cookware is unsuitable.| Use suitable cookware. Refer to “Hints and tips”.
| The diameter of the bottom of the cookware is too small for the zone.| Use cookware with correct dimensions. Refer to “Technical data”.
 and a number comes on.| There is an error in the hob.| Deactivate the hob and activate it again after 30 seconds. If   comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre.
You can hear a constant beep noise.| The electrical connection is incorrect.| Disconnect the hob from the electrical supply. Ask a qualified electrician to check the installation.

8.2 If you cannot find a solution…
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also a three-digit letter code for the glass-ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of the guarantee are in the guarantee booklet.

TECHNICAL DATA

9.1 Rating plate

Model IKB64431FB
Typ 61 B4A 00 AA
Induction 7.35 kW
Ser.Nr. ……………..
AEG| PNC 949 597 645 00
220 – 240 V / 400 V 2N 50 – 60 Hz
Made in Germany
7.35 kW

---|---

9.2 Cooking zones specification

Cooking zone| Nominal power (maximum heat setting) [W]| PowerBoost [W]| PowerBoost maximum duration [min]| Cookware diameter [mm]
---|---|---|---|---
Left front| 2300| 3700| 10| 125 – 210
Left rear| 1800| 2800| 10| 145 – 180
Right front| 1400| 2500| 4| 125 – 145
Right rear| 1800| 2800| 10| 145 – 180

The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.
For optimal cooking results use cookware no larger than the diameter of the table.

ENERGY EFFICIENCY

10.1 Product information according to EU 66/2014 is valid for the EU market only

Left rear
Right front
Right rear| 21.0 cm
18.0 cm
14.5 cm
18.0 cm
Energy consumption per cooking zone (EC electric cooking)| Left front
Left rear
Right front
Right rear| 178.4 Wh / kg
174.4 Wh / kg
183.2 Wh / kg
184.9 Wh / kg
Energy consumption of the hob (EC electric hob)| 180.2 Wh / kg

EN 60350-2 – Household electric cooking appliances – Part 2: Hobs – Methods for measuring performance

10.2 Energy saving
You can save energy during everyday cooking if you follow the below hints.

• When you heat up water, use only the amount you need.
• If it is possible, always put the lids on the cookware.
• Before you activate the cooking zone put the cookware on it.
• Put the smaller cookware on the smaller cooking zones.
• Put the cookware directly in the center of the cooking zone.
• Use the residual heat to keep the food warm or to melt it.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol   Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol   with the household waste. Return the product to your local recycling facility or contact your municipal office.

www.aeg.com/shop

867358894-B-152022

Documents / Resources

| AEG IKB64413FB Induction Hob [pdf] User Manual
IKB64413FB Induction Hob, IKB64413FB, Induction Hob, Hob
---|---

References

• AEG - aeg.com
• Product Support | AEG

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>