GPX PJ712W Showtime Max 1080p Projector With Bluetooth User Guide
- June 13, 2024
- GPX
Table of Contents
- GPX PJ712W Showtime Max 1080p Projector With Bluetooth
- Product Information
- Product Usage Instructions
- Safety Instructions & Warnings
- Overview
- Projector
- Remote
- Projector Setup
- Projector Setup
- Options Menu
- Connecting to Other Devices
- Customer Support
- Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GPX PJ712W Showtime Max 1080p Projector With Bluetooth
Product Information
This product is a projector that provides high-quality video and image projection. It comes with various features and inputs to enhance your viewing experience.
Features
- Projector Lens
- Angle Adjustment Knob – For adjusting the height and angle of the projector
- Micro SD Slot
- Audio Out Port
- AV In Port
- HDMI 1 Port
- DC In Port
- IR Sensor – For receiving remote commands
- USB Port
- HDMI 2 Port
- Focus Adjust Knob – For adjusting screen focus and image size
- Keystone Adjust Knob – For adjusting image distortion
- Source Button – For selecting input source
- Menu Button – For accessing the projector menu
- Navigate Buttons – For navigating menu options and adjusting volume
- OK Button – For selecting menu options and confirming selections
- Return Button – For returning to the previous screen or exiting the menu
- Power Button – For turning the projector on/off or entering standby mode
Product Usage Instructions
Projector Setup
- Connect the power cable to the DC In Port and plug it into a power outlet.
- Adjust the projector angle using the Angle Adjustment Knob to ensure proper projection.
- If needed, adjust the screen focus by turning the Focus Adjust Knob.
- Connect the desired input source to the corresponding ports (Micro SD, Audio Out, AV In, HDMI 1/2).
- Press the Power Button to turn on the projector.
Menu Options
To access the projector menu, press the Menu Button. Use the Navigate
Buttons to navigate through the menu options. Press the OK Button to select an
option and confirm selections. Use the ReturnButton to go back to the previous
screen or exit the menu.
Connecting to Other Devices
- HDMI : Connect an HDMI device to the HDMI port for high-quality audio and video.
- Audio/Video Input : Connect external audio/video devices using the AV In port.
- Pairing to Bluetooth Wireless Speakers or Sound Bar: Follow the device’s instructions to pair it with the projector.
- External Audio : Connect external audio devices using the Audio Out port.
- MicroSD & USB Storage Devices: Insert a MicroSD card or USB storage device into the corresponding slots for playback.
Customer Support
If you need assistance or have any questions regarding the product, refer
to the Contact Information provided in the user manual. The product comes with
a warranty and international support is available.
Safety Instructions & Warnings
Important Safety Instructions
- Read these Instructions.
- Keep these Instructions.
- Heed all Warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
FCC Warnings
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Battery Warnings
- WARNING: Do not ingest battery, Chemical Burn Hazard.
- If the remote control supplied with this product contains a coin/button cell battery and the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
- Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
- CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.
- Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
- Do not mix old and new batteries.
- Completely replace all old batteries with new ones.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
- Batteries should be recycled or disposed of as per state and local guidelines.
Additional Warnings and Precautions
- Do not look directly into the projector light.
- Use in well ventilated area with ambient temperature between 41°F~104°C (5°C~40°C).
- Do not block any ventilation openings.
- To prevent risk of overheating, place the projector in an area that does not block ventilation, such as an enclosure or cabinet that might restrict airflow.
- Do not place the projector on an unstable surface, such as a loose stack of books, bed, or cushion.
- Do not cover the projector with a blanket, curtain, or similar. If setting up near a wall, leave at least 10 in. (25cm) between the wall and the projector’s ventilation ports.
- Use a power outlet that can be easily accessed and unplugged.
- Do not block the light coming out of the lens. The light will heat the object and may cause burns, cause it to melt or catch fire.
- When powering off the projector, allow the cooling cycle to finish before handling or disconnecting the power supply.
- Do not use the projector if it has been damaged. Damage could be (but not limited to)
- Unit has been dropped or something has been dropped on it or into it.
- Something is loose or rattling inside the unit.
- Projector has been exposed to rain or liquid.
- Power supply or power cord is damaged.
- Do not use the projector in places where flammable gases or explosives may be present.
- Do not use the projector in the following conditions
- Extremely hot, cold, or humid environments
- Environments with excessive amounts of dust and dirt in the atmosphere.
- Near appliances generating a strong electromagnetic field or heat.
- In direct sunlight.
- If the air vents become clogged or dirty, use a vacuum or air compressor and nozzle to clean. Do not use canned air, as the gas may leave a residue inside the enclosure.
- CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
- Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
- CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
- WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
- WARNING: Shock hazard – Do Not Open.
- Caution and marking information is located at the rear or bottom of the apparatus.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
- Objects filled with liquids, such as vases, shall not be placed on the apparatus.
- Do not place any objects, heavy or otherwise, on the projector.
- This product meets and complies with all Federal regulations.
- See projector enclosure for related safety markings.
- No user serviceable parts inside, do not attempt to open the unit or perform any repair. Doing so may cause damage or injury, and will void your warranty.
- Refer all repairs or replacement to qualified service personnel.
- Stop using the projector and unplug the power source immediately if you notice the following
- Smoke coming from the unit or power supply.
- Strange odors or noises coming from the unit.
- Liquid or foreign objects have gotten inside the unit.
- Unit has been dropped and enclosure has been damaged.
WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
This symbol indicates that this product incorporates double insulation between
hazardous mains voltage and user accessible parts.
WARNING : This product can expose you to chemicals including lead, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warnings. ca.gov. This product meets and
complies with required Federal product guidelines.
Overview
Features
- Native Resolution: 1920 x 1080 (1080p)
- Supports 480p, 720p, 1080i, 1080p
- Aspect Ratio: 16:9, 4:3
- Brightness: 280 ANSI lumens
- Bluetooth transmitter
- I/O: 2 x HDMI, USB, MicroSD card, 3.5mm audio input/output
- 43˝ to 300˝ viewable screen size
- Display distance: 4.27–30.8 ft. (1.3–9.4m)
- Supports mpeg1, mpeg2, mpeg4, mp3, jpeg
- Built-in speaker
- Manual keystone angle correction and focus adjust
Includes
- Remote control : requires 2 AAA batteries (not included)
- AC/DC power adapter
- User’s Guide
Projector
Features & Inputs
-
Projector Lens
-
Angle Adjustment Knob – Turn to raise or lower the projector height and angle.
-
Micro SD Slot
-
Audio Out Port
-
AV In Port
-
HDMI 1 Port
-
DC In Port
-
IR Sensor – Sensor for receiving remote commands.
-
USB Port
-
HDMI 2 Port
Projector -
Focus Adjust Knob – Turn to adjust screen focus by changing the image size.
-
Keystone Adjust Knob – Turn to adjust image distortion.
-
Source – Press to select input source.
-
Menu – Press to enter the projector menu.
-
Navigate Left/Volume Down -Press to navigate options on the menu screens. Press and hold to decrease the volume level.
-
Navigate Up – Press to navigate options on the menu screens.
-
OK – Press to and confirm menu selections.
-
Navigate Down – Press to navigate options on the menu screens.
-
Navigate Right/Volume Up -Press to navigate options on the menu screens. Press and hold to increase the volume level.
-
Return – Press to return to the previous screen or exit the menu.
-
Power – Press once to turn the projector on. Press again to enter standby mode.
Remote
Functions
Batteries
Requires 2 AAA batteries (not included).
Projector Setup
Power
Plug the AC/DC power adapter (included) into a standard wall outlet and the DC
power input on the rear of the unit. After connecting power, please allow
approximately 5 seconds to pass before powering the unit ON.
Projector Placement
For best results, place the projector in a dark room or other dimly lit area.
The projector will display a screen size from 43˝ to 300˝. Adjust the
projector angle and distance to best suit your needs.
Use the unit with a dedicated projector screen for best picture resolution. If
placing the projector behind the viewing screen (unit in front of/projecting
toward viewers), a special screen will be required. Projector screens are not
included. If you are not using the unit with a screen, a smooth, white or
lightly colored surface will provide the best results.
Angle Adjustment
Use the Angle Adjustment Knob to fine tune the projector’s height.
Viewing Options
The projector can be used to project onto a wall or screen. It can be mounted
from a ceiling or placed on a table. Be sure to aim the remote at the sensor
on the front or rear of the projector. See page 6 for sensor locations on the
projector. When projecting from the rear position, a special screen will be
needed (not included) to display the image.
Note: The quality of the projection screen will also affect the image quality. Therefore, it is recommended to use a white wall or higher quality projector screen for best results. Projecting images onto a thin material, low grade screen can reduce image quality.
Image Adjustment
Projector Setup
Ceiling Mount
To mount the projector from the ceiling, you will need mounting hardware as
recommended by a professional. Mounting hardware and instructions are not
included.
Before mounting, be sure the ceiling structure can support the weight of the
projector and the mount itself. It is recommended to have this unit mounted by
a professional.
Menu Options
Change projector settings by pressing the Menu button on top of the
projector.
Note: Not all settings are user adjustable.
Picture Menu
-
Picture Mode
Use the Navigation Buttons to select Standard, Dynamic, Mild, or User (custom). The User setting allows you to adjust Contrast, Brightness, Color, and Sharpness. -
Contrast
Set the contrast level between 0 and 100 using the Navigation buttons. -
Brightness
Set the brightness level between 0 and 100 using the Navigation buttons. -
Color
Set the color level between 0 and 100 using the Navigation buttons. -
Sharpness
Set the sharpness level between 0 and 100 using the Navigation buttons. -
Color Temperature
Select Cool, Medium, or Warm using the Navigation buttons.
Sound Menu
-
Sound Mode
Select Standard, Movie, Music, Sports, and User (custom). The User setting allows you to adjust the Treble and Bass levels. -
Treble
Set the treble level between 0 and 100 using the Arrow buttons. -
Bass
Set the bass level between 0 and 100 using the Arrow buttons. -
Balance
Set the balance level between -50 and +50 using the Arrow buttons. -
BT Setting
Turn Bluetooth ON or OFF.
Options Menu
-
OSD Language
Select English, French, or Spanish for the On Screen Display. -
Flip
Use the Arrow buttons to select Front Table, Front Ceiling, Rear Table, or Rear Ceiling. -
Aspect Ratio
Use the Arrow buttons to select an aspect ratio from 4:3, 16:9, Full. Panorama, and Just Scan. -
Restore Factory Default
Reset the projector and restore all the default settings by selecting Y or N. Y will return the projector to factory default settings. -
Software Update (USB)
For service center use only.
Connecting to Other Devices
HDMI
HDMI offers superior sound and picture quality and is the easiest way to play
media from a computer, Blu-Ray player, or other device with an HDMI output.
Requires an HDMI cable (not included) and a device with an HDMI output.
- Press the Power button on the projector to enter Standby mode.
- Using an HDMI cable, connect the HDMI 1 or HDMI 2 input on the projector to the HDMI output on your media player or computer.
- Press the Power button on the projector to turn the unit on.
- Press the Source button and use the Navigation and OK buttons to select HDMI 1 or HDMI 2 as the source. Use the controls on the connected device to select and play media.
Note: Due to copyright issues, this projector does not support direct playback of Netflix, Amazon, or Disney streaming properties through a TV or laptop HDMI connection. However, you can stream these services using a streaming stick inserted into the HDMI port of the projector. When using a streaming stick, follow the use instructions included with the device.
Audio/Video Input
Requires a 3.5mm to RCA audio/video cable (not included).
- Press the Power button on the projector to enter Standby mode.
- Connect the 3.5mm to RCA audio/video cable to the AV input on the unit.
- Connect the 3.5mm to RCA audio/video cable to the RCA stereo audio outputs and composite video output on the media player.
- Press the Power button to turn the Projector on.
- Press the Source button and select the AV icon. Use the controls on the connected player to select and play media.
Connect AV cable (included) to media player’s AV outputs.
- Audio Left Channel – White
- Audio Right Channel – Red Video – Yellow
Connecting to Other Devices
Pairing to Bluetooth Wireless Speakers or Sound Bar
NOTE: Bluetooth is OFF by default when the projector first powers ON. Bluetooth can be turned ON or OFF from the Sound Menu (steps 2 and 3 below).
- Enable Bluetooth on the receiver (external speakers, sound bar, etc.) to which you wish to connect. Devices such as smartphones, tablets, or computers are not Bluetooth receivers and will not connect to the projector. To eliminate confusion, you should disable Bluetooth on all receivers to which you do not wish to connect.
- Power on the projector and press the menu button. Select and enter the sound menu by using the navigation and OK buttons.
- Select the Bluetooth setting by using the navigation and OK buttons. After selecting the Bluetooth setting, use the Up or Down navigation buttons to change the setting to ON. Now the BT Settings menu will appear.
- In the BT Settings menu, use the OK button to select Search BT to scan for available devices. Using the navigation buttons select your desired Bluetooth speaker or soundbar and press OK.
- When successfully paired, the Bluetooth receiver should indicate it is connected, usually with a chime or other audible noise. Check the user manual on your Bluetooth receiver for more information.
- When successfully connected, the projector will display the Bluetooth receiver’s name on the top right portion of the Main Menu screen, and sound played from the projector will be heard through the Bluetooth receiver.
After initial pairing, the projector and the Bluetooth speakers will stay paired unless unpaired manually by the user or erased due to a reset of either device. If this occurs or you find either unit is unable to connect, repeat the above steps. To disconnect Bluetooth, enter the Sound menu and change the BT setting to OFF.
External Audio
Requires a 3.5mm to RCA audio/video cable (not included).
Note: Speakers must have their own power supply.
- Press the Power button on the projector to enter Standby mode.
- Using a 3.5mm to RCA stereo cable, connect the external powered speakers to the Headphone Jack on the projector.
- Note: The yellow video plug will not be needed in this setup and will not need to be connected.
- Press the Power button to turn on the projector. The projector will automatically detect the connection and send audio signal to the speakers.
MicroSD & USB Storage Devices
Supports MicroSD cards and USB drives up to 256GB NTFS format. Supports mpeg1,
mpeg2, mpeg4, mp3, and jpeg file formats.
- Press the Power button on the projector to enter Standby mode before inserting a USB drive or MicroSD card. Then, insert into the appropriate port or slot and turn the unit on.
- On the home menu, use the Navigation buttons to select Photo/Movie/Music, then press the OK button to enter the menu.
- Select “C:drive” or “D:drive” as the source to begin playing content from the connected storage device. The first installed device, either USB or MicroSD card, will be assigned “C:drive” by the projector. The second installed device will be assigned “D:drive.”
- Use the Navigation buttons to search for the file you wish to playback and press the OK button to select.
Note: Before removing an inserted USB drive or MicroSD card, first press the Power button to enter standby mode.
Customer Support
Contact Information
- Website : www.gpx.com
- Email Support : prodinfo@dpiinc.com
- Email Parts : partsinfo@dpiinc.com
- Phone Support : 1-888-999-4215
Warranty
For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.gpx.com
International Support
To download this User’s Guide in English, Spanish, and French, or to get
answers to frequently asked questions, visit the support section at:
www.gpx.com
www.gpx.com
Copyright © 2023 Digital Products International (DPI, Inc.) All other
trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.