GPX, Inc. C353B AM/FM Clock Radio with Dual Alarms-Complete Features/Owner’s Guide

GPX, Inc. C353B AM/FM Clock Radio with Dual Alarms

Specifications

• POWER SOURCE : Battery Powered
• BRAND : GPX
• COLOR : Black
• HARDWARE INTERFACE : 3.5mm Audio
• ITEM WEIGHT : 1.06 Pounds
• ITEM DIMENSIONS LXWXH : 7.87 x 2.72 x 3.23 inches
• DISPLAY TYPE : LED

Introduction

This clock radio features a dual alarm function to ensure that you wake up on time, which is just what you need and want. The wake feature features a big snooze button and allows you to wake up gradually utilizing the radio or alarm. The built-in AM/FM antennas allow you to listen to your preferred radio stations whenever you want. You may adjust the volume and dimmer of this clock radio to a comfortable level for your own use because it has 10 AM and 10 FM presets. The contemporary design looks great everywhere. A large 1.8-inch green LED display is easy to read, and the controls are simple to use. The clock has an AC power line integrated into it, but for added security, it also features a battery backup powered by two AAA batteries (not included). The clock radio, a warranty card, and a user’s manual are all included in the box. GPX has provided one of the most comprehensive portfolios of technology-driven consumer audio and video products for over 30 years. An industry leader in consumer electronics, GPX has established a strong reputation for its superior product quality, dependability, design, and pricing.

POWER

Plug the built in AC power cord into an AC power outlet to power the dock.

BATTERY BACKUP

The battery backup is intended for short power outages only. The clock radio’s primary functions cannot run off of the battery backup alone. Requires 2, AAA- size, batteries (not included)

CLOCK AND SLEEP TIMER

SETTING THE CLOCK

1. If in radio mode, press and hold the Power/Source/Al Off button to turn the unit off.
2. Press and hold the Clock/Mem button until the display begins to blink, then release the button.
3. Press the Hour button to adjust the hour.

The PM indicator will light when the hour is set in the PM.

4. Press the Min button to adjust the minute.
5. Press the Clock/Mem button to finish setting the time.

SETTING THE SLEEP TIMER

1. Press the Snooze/Sleep button repeatedly to set the sleep timer (90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF).
2. Once the set sleep time has expired the clock radio will automatically power off.

ALARM

SETTING THE ALARM

1. If in radio mode, press and hold the Power/Source/Al Off button to turn the unit off.
2. Press the Al1 or Al2 button until the display begins to blink.
3. Press the Hour button to adjust the hour.

The PM indicator will light when the hour is set in the PM.

4. Press the Min button to adjust the minute.
5. Press the Al1 or Al2 buttons repeatedly to switch between Radio and Buzzer.

Please refer to the Radio section to adjust the volume of the alarm.

6. Once the set alarm time is reached, the alarm will sound.

To set the other alarm, follow the above steps and choose the alarm not currently set.

CANCELLING THE ALARM

1. Follow the instructions for Setting the Alarm.
2. Press the Al1 or Al2 buttons repeatedly until the indicator is no longer lit.

SNOOZE AND ALARM RESET

After the alarm sounds:
Press the Snooze/Sleep button to delay the alarm for an additional 9 minutes.
OR
Press the Power/Source/Al Off button to turn the alarm off until the set alarm time is reached again.

RADIO

TUNING THE AM OR FM RADIO

1. Press the Power/Source/Al Off button to turn the clock radio on.
2. Press the Power/Source/Al Off button again to switch between the AM and FM radio mode.
3. Press the Tun+ and Tun- buttons to adjust the radio to the desired frequency.
4. Press and hold the Tun+ and Tun- buttons to search for the next available frequency.
5. Press the Vol+/- buttons to adjust the volume.
6. Press and hold the Power/ Source/Al Off to turn the radio off.

SAVING A STATION AS A PRESET

1. Follow the instructions for Tuning the AM or FM Radio.
2. Tune to the desired station.
3. Press and hold the Clock/Mem button to save the current radio station as a preset.

TUNING TO A PRESET RADIO STATION

1. Follow the instructions for Tuning the Radio and Saving a Station as a Preset.
2. Press the Clock/Mem button to cycle through preset radio stations.

RADIO RECEPTION

Adjust the position of the FM Antenna to improve FM radio reception. An AM antenna is built into the clock radio. To improve AM radio reception, adjust the position of the clock radio.

Frequently Asked Questions

• On my Intertek clock, how can I set the time?
  When the hour flashes in the display, press and hold the TIME or CLOCK buttons for longer than 2 seconds. Select the date and/or time as needed by pressing the + or – buttons, then click the CLOCK or TIME buttons. To set the remaining date and/or time properties, repeat step number two.

• How do I silence my GPX alarm’s alarm?
  When in off mode, continually press the AL1 or AL2 buttons to cycle through Radio, Buzzer, and then OFF. Watch for the screen to stop blinking. Your alarm is completely off at this point unless you set it again.

• Dual alarm: What does that mean?
  One of the best dual alarm clocks can assist in establishing a distraction- free atmosphere for a restful night’s sleep by replacing your phone with one of these devices. These alarm clocks are also perfect for people who tend to sleep a lot and want a loud alarm to wake them up or like to wake up gradually to simulated sunlight.

• How is a manual alarm clock set?
  You may set the time and the alarm by using the knobs or keys that are located on the face of the clock. Three knobs are typically present: one for the hour hand, one for the minute hand, and one for the alarm.

• A digital clock’s AM and PM settings are described?
  Click the switch next to the 24-hour clock after clicking the ••• to the right of the clock to alter the format of the time display. To keep the interface tidy, the AM/PM unit will briefly appear when you switch to the 12-hour format and then fade away.

• How can the alarm be disabled on a digital clock?
  Launch the Clock app on your phone. Tap Alarm down at the bottom. Tap the On/Off switch next to the desired alarm.

• On a Timex alarm, how do you silence the alert?
  Press and hold the Power/Mode/Alarm Reset Button, Alarm 1 Button, or Alarm 2 Button to turn off any alarm that is currently sounding and to reset it so that it will sound again at the same time the next day.

• How do I adjust my advanced alarm clock’s time?
  Press the HOUR button to move to the appropriate hour while keeping the ALARM button depressed. When the hour advances into the PM, the PM indicator will glow. Press the MIN button to get to the right minute while keeping the ALARM button pressed.

• How is an analog alarm clock set?
  The time you want your alarm to go off should be displayed by the fourth stationary hand on the clock face after turning the alarm-set knob to that point. To set off the alarm, move the “Alarm ON/OFF switch” to “ON.” Slide the “ON/OFF switch” to “OFF” to silence the alarm after it has sounded.

• How does a little clock set the time?
  Find the “Clock,” “Clock Set,” or “Time” buttons. Look for buttons with the labels “Mode” or “Settings” if your digital clock model lacks one of these buttons. Press the proper time-setting button, or press and hold it, until the numbers on the digital display begin to blink.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>