Bonsen S3106 Micro Cut Paper Shredder User Manual

Bonsen S3106 Micro Cut Paper Shredder User Manual

S3106 10 SHEETS

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.

CONTACT US!

Please give us a chance to make it right and do better! Contact our friendly customer service department for help firstly. Replacements for missing or damaged parts will be shipped.

Customer Service:
support01@bonsenglobal.com

BEFORE YOU START

• Please read all instructions carefully.
• Retain instructions for future reference.
• Read through each step carefully and follow the proper order.
• Please place this machine on a flat and stable surface, please be careful not to tip over the machine.
• In case the machine breaks down and cannot be used appropriately.
  • Dangerous, please do not disassembly, modify or repair the machine in any way on your own.
• To avoid electric shock or accidental injury.
  • When emptying the waste bin, moving, or not using the machine for a certain period of time, please unplug and disconnect the power.
    *To avoid fire accident or electric shock.
  • Please do not splash water in this machine.
• To avoid fire accident or electric shock.
  • lease do not use this machine near a heating machine or a cooling machine, or in a place with high temperature, high humidity, and heavy dust.
  • • To avoid fire accident or electric shock .
  • Please do not put adhesive tape, carbon paper, fabric, plastic film, etc. into the Machine for crushing.
• To avoid failures of the machine .
  • Please do not damage or process the power cables, or do not place heavy objects on the cables.
• To avoid fire accident or electric shock .
  • If abnormal conditions such as smoke or odor occurred, please disconnect the power and stop using it immediately.
• To avoid fire accident or electric shock .
  • Please do not use if the shredder or the power cable is damaged or defective.
• To avoid fire accident or electric shock.

IMPORTANT SAFETY INTRODUCTIONS

KNOW YOUR SHREDDER

PRODUCT SPECIFICATIONS

CONTROL PANEL

OPERATING INSTRUCTIONS

Overload (“ON/OFF button” is in red with flashing, need to take out excess papers).
Clean the confetti (The “ON/OFF button”changes from purple to flashing purple, pulls out the waste bin, and cleans the confetti to put the waste bin in place, the machine can continue to use).

PRODUCT MAINTENANCE

1. All shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding, and could ultimately stop running. To avoid these problems, we recommend you oil your shredder once a month.
2. Due to the precision and sharpness of the blades of the shredder, please keep foreign objects like clothes corner, tie, hair, etc. away from shredder openings to avoid damage in daily use.
3. When the waste bin is full, please empty it in time to avoid affecting the normal operation of the machine.
4. Do not put broken fabric, plastic ( except for credit card) , hard metal, etc. into the shredder.
5. In order to prolong the service life of the shredder, it is advisable that the amount of shredded paper should be lower than the maximum amount of shredded paper specified in the manual.
6. While clean the face of machine, please kindly plug out first or make the shredder under OFF status and then wipe it with a soft cloth with detergent or soft soapy water. Please kindly don’t let the detergent or soapy water goes through the shredder inside and don’t use bleach, gasoline or thin liquid to wash the shredder. Please don’t allow sharp objects to scratch the casing, which may affect the effect of shredder vision or will damage the shredder.

TROUBLE SHOOTING

If the above answers cannot solve your problems, please kindly contact with us customer service team via email support01@bonsenglobal.com.

LIMITED WARRANTY

This product implements free maintenance for product failures due to non-human factors within 12 months.
We stand by our product and offer a 30-day money-back guarantee. During this time, you could return them without any paying extra fee if there is a manufacturing defect in it. Please rest assured that the returns are free and easy if there is a manufacturing defect. Otherwise, it would be the customer’s responsibility to cover the shipping fee. Products on sale are also returnable.

If the product isn’t meeting your expectations, please email within 30-days of receipt. We will help you to either return or exchange your product. Your original form of payment will be refunded in full once the full return is complete. After 30-days orders may be subject to a 20% restocking fee and all shipping and handling charges will be the responsibility of the customer. Additional return details are listed below. After 60-days the purchase from BONSEN is non-refundable.

If you receive a damaged product, you must notify BONSEN within 48 hours of delivery. BONSEN will investigate the claim and notify the freight company of the damage. Please retain all packaging in the event that BONSEN or the freight company needs to inspect it. These investigations may take several days but merchandise replacements will be processed as soon as possible.

For product arrived defective or damage, We’re sorry to hear that your BONSEN product arrived in less than perfect condition. We’d like to resolve this issue right away with the help of our Customer Support Team and Quality Assurance team. They’ll need to know a bit of information on your order as well as the issue you’re experiencing with your BONSEN product. To report your issue, please reach out to our Customer Support team by emailing support01@bonsenglobal.com with your order number. We may need you to make a short video, or take some pictures of the defects of the product and send them to support01 @bonsenglobal.com. After a preliminary analysis on the video or pictures, we will send you a brand new replacement right away if it is confirm to be defective on its arrival. If we determine that you have misrepresented BONSEN product’s condition and that product is not defective, we will send you the right instruc­tions and help you to use the product correctly.

If you have any questions or any confusions, Please kindly contact with us: support01@bonsenglobal.com.

Recycle of the Shredder

Please make sure to send waste electronic products and packaging materials to special collection points, so as to avoid uncontrolled and unnecessary waste disposal and help material recycling.

The packaging materials have been selected for their environmental friendiness and ease of disposal and are therefore recyclable. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.

Manufacture: Bonsen Electronics Limited Address: No.11-12, Lun Pin Chong Industrial Zone San Tun Community, Hou Jie Town 523941 Dongguan City, Guangdong PEOPLE’S REPUBLIC OF CHINA
Contact: 1-844-728-6917
Customer Service: support01@bonsenglobal.com

Designed in Georgia Made in China

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>