AMP RESEARCH 75325-01A BedStep Instruction Manual
- June 13, 2024
- AMP RESEARCH
Table of Contents
AMP RESEARCH 75325-01A BedStep
Product Information
- Product Name: AMP PART # 75325-01A
- Application: Dodge Ram 1500 2009-2018 (2019 Classic) (Compatible with Single / Dual Exhaust)
- Manufacturer: AMP Research
- Website: www.amp-research.com
- Technical Support: AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2) Monday – Friday, 7:00 AM – 5:00 PM PST
Product Usage Instructions
- Ensure that the product is compatible with your Dodge Ram 1500 model and year.
- Locate Bracket A and Bracket B.
- Using a torque wrench, tighten Bracket A to 33 ft-lbs / 44 Nm and Bracket B to 16 ft-lbs / 22 Nm.
- Remove the Driver-side bumper mount using a 10mm socket.
- Loosen the ball socket joint using a 13mm socket and adjust the spacing of the exhaust tip to be approximately 1 inch from the bumper. Repeat for the passenger side.
- Torque the bolts to 41 ft-lbs / 55Nm.
- Ensure that the step pad is not overtightened to avoid damage.
- Clean the step pad surface and linkage arms with mild soap and water using a soft brush or sponge. Rinse with fresh water.
- Adjust the spacing of the exhaust tip as per step 9 using a 13mm socket. Repeat for the passenger side.
- Register your product for faster service and product updates by visiting www.amp-research.com/productregistration or scanning the provided QR code.
- Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed.
- Ensure that the BedStep is always stowed in the retracted position when driving.
Important: Please read and precisely follow the provided instructions during installation to ensure proper installation and avoid potential safety hazards.
Maintenance Tips
- Wash the step pad surface and linkage arms with mild soap and water using a soft brush or sponge to remove mud, dirt, or road grime. Rinse with fresh water.
Warning: Failure to install the product correctly may put vehicle occupants in a potentially dangerous situation. After installation, re-check to ensure proper installation.
Parts And Tools
Installation Instructions
Torque to
- A) 33 ft-lbs / 44 Nm
- B) 16 ft-lbs / 22 Nm
- Due to variances in builds exhaust tip spacing varies. The top edge of the exhaust tip should be approx. 1” from bumper. See step 10 for tailpipe adjustment
- Using a 13mm Socket loosen ball socket joint. Adjust spacing per step 9. Repeat for passenger side.
REGISTER YOUR PRODUCT
Thank you for your recent AMP Research Purchase.
REGISTER YOUR PRODUCT TODAY FOR FASTER SERVICE & PRODUCT UPDATES
Please visit: www.amp-research.com/productregistration or scan the QR Code
Product Registration Benefits
- Ensure we have your purchase receipt and product info in our system which is required for warranty
- Faster and easier access to customer service and tech support in the unlikely event you need warranty or product support
- Registration helps us keep you up to date on product information and offers
To view other Amp Research products that may be offered for your vehicle.
Please visit: www.amp-research.com
Congratulations on the purchase of your AMP RESEARCH BedStep®
Here’s what you should know…
OPERATION
- The AMP Research BedStep® is foot operated and deploys and retracts with a nudge of your foot.
- To deploy, press down using your left foot, on the forward outside corner of the step pad.
- To retract, gently kick the underside of the step pad.
- Max Load Capacity: 300lbs.
- Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed.
MAINTENANCE TIPS
- The step pad surface and linkage arms can be washed with mild soap and water using a soft brush or sponge to dislodge any mud, dirt or accumulated road grime. Rinse with fresh water.
- To prevent slipping, avoid applying waxes, lubricants or protectants like Armor All® to the step surface.
ATTENTION: BEDSTEP SHOULD ALWAYS BE STOWED IN THE RETRACTED POSITION WHEN DRIVING.
LIMITED WARRANTY
- AMP RESEARCH warrants product to be free from defects in material and workmanship, for terms specified below, provided there has been normal use and proper maintenance. All remedies under this warranty are limited to the repair or replacement of any item found by the factory to be defective within the time period specified.
- If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid. Damage to our products caused by accidents, fire, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty.
- THE WARRANTY TIME PERIOD IS AS FOLLOWS: THREE YEARS FROM DATE OF PURCHASE.
- ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
- Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
- FOR WARRANTY ISSUES WITH THIS PRODUCT PLEASE CALL AMP RESEARCH CUSTOMER SERVICE 1-888-983-2204
WARNING: Be sure to read and precisely follow the provided instructions when installing this product. Failure to do so could place the vehicle occupants in a potentially dangerous situation. After installing or reinstalling, re-check to insure that the product is properly installed.
Warranty
Three-year limited warranty
- Three-year limited warranty.
- Professional installation is recommended.
More Information
AMP RESEARCH TECH SUPPORT: 1-888-983-2204 (Press 2) Monday – Friday, 7:00 AM – 5:00 PM PST
Designed and manufactured by AMP Research®. Patent Number 6,830,257; 6,641,158; 6,834,875; 6,938,909; 6,942,233; 7,007,961; 7,055,839; 7,163,221; 7,367,574; 7,380,807; 7,398,985; 7,413,204; 7,487,986. Other US and Worldwide patents pending.
Made in USA © 2009 AMP Research
References
- AMP Research Accessories | RealTruck
- AMP Research Accessories | RealTruck
- RealTruck Warranty Registration | RealTruck
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>