PIT BOSS PB3BGT1 3 Burner Gas Griddle Lid Installation Guide
- June 13, 2024
- PIT BOSS
Table of Contents
PIT BOSS PB3BGT1 3 Burner Gas Griddle Lid
Product Information
- Product Name: PB3BGT1 Griddle Lid
- Part Number: 41053
- Included Parts: (1) Lid, (2) Hinges x2, (3) Left Top Hinge, (4) Right Top Hinge, (5) Lid Handle Bezel x2, (6) Lid Handle
- Note: Griddle not included
Product Usage Instructions
- Remove the griddle cooking surface and set it aside.
- Remove the two screws from the outside burners (not the center).
- First, install the Left Top Hinge by using the pre-installed screws, locking washers, and washers. Slide the hinge pin into the lower hinge on the firebox base.
- Next, slide the Right Top Hinge pin into the lower hinge on the firebox base. Then secure the Right Top Hinge with the pre-installed screws, locking washers, and washers.
- Remove the pre-installed screws from the handle. Place the lid handle bezels between the handle and lid. Secure them into place with the screws.
- Place the griddle cooking surface on top of the firebox.
- The Griddle Lid is now fully installed.
For more information, please visit PITBOSS-GRILLS.COM
If you are in the USA, you can contact us at 480-923-9630. If you are in Canada, please call our toll-free number: 1-877-942-2246.
INSTALAATION INSTRUCTION
- Included Parts: (1) Lid, (2) Hinges x2 , (3) Left Top Hinge, (4) Right Top Hinge, (5) Lid Handle Bezel x2, (6) Lid Handle.
- First, install the Left Top Hinge with the pre-installed screws, locking washers, and washers. Slide the hinge pin into the lower hinge on the firebox base. Remove the griddle cooking surface and place aside.
- Remove the two screws from the outside burners, not the center.
- Place the hinge on the back edge of the firebox at a 90° angle and rotate down to line it up to the screw holes from the burners. Screw the hinges and burners in place with the pre-installed screws, locking washers, and washers.
- First, install the Left Top Hinge with the pre-installed screws, locking washers, and washers. Slide the hinge pin into the lower hinge on the firebox base.
- First, slide the Right Top Hinge pin into the lower hinge on the firebox base. Then secure the Right Top Hinge with the pre-installed screws, locking washers, and washers.
- Remove the pre-installed screws from the handle. Place the lid handle bezels between the handle and lid. Secure them into place with the screws.
- Place the griddle cooking surface on top of the firebox.
- The Griddle Lid is fully installed.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>