Prestel EHD-4K100L 18Gbps HDMI Over HD Base Extender With Bi Directional User Manual
- June 13, 2024
- Prestel
Table of Contents
Prestel EHD-4K100L 18Gbps HDMI Over HD Base Extender With Bi Directional
User Manual
Introduction
This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR and internet signal, at the distance of up to 328ft / 100 meters between transmitter and receiver via a single CAT6/6a cable and support resolution up to 4K2K@60Hz 4:4:4. The transmitter supports ARC function and local audio extract. In addition, the extender is equipped with bi-directional IR pass-through which allows for source and display control. It also supports PoC function.
The extender offers the most convenient solution for HDMI extension via a single CAT cable with long distance capability, and is the perfect solution for any application.
Features
- HDCP 2.2 / 1.x and DVI 1.0 compliant
- Support 18Gbps video bandwidth
- Video resolution is up to 4k2k@60Hz YUV 4:4:4 High bit rate audio transmission via HDMI
- The maximum transmission distance is 328ft / 100 meters via a single CAT6/6a cable
- Support PoC (Power over Cable) function
- Support ARC (Audio Return Channel) function
- Support bi-directional IR, RS-232 and LAN signal pass-through transmission
- HDR, HDR10+, Dolby Vision and HLG function supported
- Compact design for easy and flexible installation.
Package Contents
| Qty | Item |
|---|---|
| 1 | 18Gbps HDMI over HDBaseT Extender (Transmitter) |
| 1 | 18Gbps HDMI over HDBaseT Extender (Receiver) |
| 1 | IR Blaster cable (1.5 meters) |
| 1 | 20~60KHz IR Receiver cable (1.5 meters) |
| 4 | Mounting Ear |
| 2 | 3-pin Phoenix connector |
| 1 | 24V/1A Locking Power adapter |
| 1 | User Manual |
| 8 | Machine screw – KM3*4mm |
Specifications
Technical
HDCP Compliance| HDCP 2.2 / 1.x
Video Bandwidth| 18Gbps
Video Resolution| 4K2K 50/60Hz 4:4:44K2K 50/60Hz 4:2:24K2K 50/60Hz
4:2:04K2K 30Hz 4:4:41080p, 1080i, 720p, 720i, 480p, 480iAll PC resolutions
including 1920 x 1200
Color Space| RGB / CyBC 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth| 8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz
YCbCr4:2:2/4:2:0)8-bit (4K60Hz 4:4:4 )
** HDMI Audio Formats| LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby
TrueHD, Dolby Digital Plus(DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
L/R Audio Formats| PCM 2.0
SPDIF Audio Formats| LPCM2.0, Dolby Digital, Dolby Digital Plus, DTS
ESD Protection| Human body model — ±8kV (Air-gap discharge) &±4kV (Contact
discharge)
Connection**
**** Transmitter| Inputs: 1x HDMI Type A [19-pin female] Outputs:
1x HDBT OUT [RJ45, 8-pin female]1x SPDIF OUT [S/PDIF]1×L/R OUT [3.5mm Stereo
Mini-jack] 1×LAN [RG45]Control: 1x IR IN [3.5mm Stereo Mini-jack] 1x IR OUT
[3.5mm Stereo Mini-jack] 1x RS-232 [Phoenix jack]1x SERVICE [Mini-USB, Update
port]
**** Receiver| Inputs: 1x HDBT IN [RJ45, 8-pin female] 1x SPDIF IN
[S/PDIF]Outputs: 1x HDMI Type A [19-pin female] 1x LAN [RG45]Control: 1x IR IN
[3.5mm Stereo Mini-jack] 1x IR OUT [3.5mm Stereo Mini-jack] 1x RS-232 [Phoenix
jack]1x SERVICE [Mini-USB, Update port]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver:163mm [W] x 90mm [D] x 16mm [H]
Weight| Transmitter: 170g, Receiver: 165g
Power Supply| Input: AC 100 – 240V 50/60HzOutput: DC 24V/1A (Locking
connector)
Power Consumption| 13 W
Operating Temperature| 32 – 104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
Resolution| Distance
4K2K| 296ft /90M
1080P| 328ft /100M
Resolution / Cable Length| 4K60 – Feet / Meters|
4K30 – Feet / Meters| 1080P60 – Feet / Meters
---|---|---|---
HDMI IN / OUT| 16ft / 5M| 32ft / 10M| 50ft / 15M
The use of “Premium High Speed HDMI” cable is highly recommended.
Operation Controls and Functions
Transmitter Panel
| Name | Function Description |
|---|---|
| Power LED | Red LED is on when the transmitter is working. LED is off when the |
transmitter is on standby.
ARC LED| Green LED is on when ARC function is turned on.
SPIDIF LED| Green LED is on when SPDIF OUT port outputs the the audio signal
returned from SPDIF IN on receiver.
SWITCH| Press the button to switch the output audio signal source for SPDIF
OUT and L/R OUT port.
SERVICE port| Firmware update port.
DC 24V| DC 24V input for 24V 1A power adapter. Note that the extender
supports PoC function, it means that either transmitter or receiver is
connected to 24V/1A power supply, the other doesn’t need power supply.
HDBT OUT| RJ45 connector for connecting the HDBT IN port of receiver with CAT
6/6a cable.
Connection Signal Indicator lamp (on the left side of the HDBT OUT port)| ▪
Illuminate: Transmitter and Receiver are in good connection status.▪
Flash: Transmitter and Receiver are in poor connectionstatus.▪ Dark:
Transmitter and Receiver are not connected.
---|---
Data Signal Indicator lamp (on the right side of the HDBT OUT port)| ▪
Illuminate: HDMI signal with HDCP.▪ Flash: HDMI signal without HDCP.▪
Dark: No HDMI signal.
HDMI IN| HDMI source input.
IR IN| IR input port for receiving the signal of IR remote.
IR OUT| IR output port for control of source device. This IR output signal is
from IR IN port of receiver.
L/R OUT| 3.5mm stereo connector for analog audio output.
SPDIF OUT| SPDIF connector for optical audio output.
RS-232| 3-pin Phoenix connector for RS-232 command transmission. The RS-232
command will pass-through from transmitter to receiver or receiver to
transmitter.
LAN| RJ45 connector for connecting Hub or router.
Receiver Panel
| Name | Function Description |
|---|---|
| Power LED | Red LED is on when the receiver is working. LED is off when the |
receiver is on standby.
ARC LED| Green LED is on when ARC function is turned on.
SPIDIF LED| Green LED is on when SPDIF OUT port outputs the the audio signal
returned from SPDIF IN on receiver.
---|---
SWITCH| Press the button to switch the output audio signal source for SPDIF
OUT and L/R OUT port.
SERVICE port| Firmware update port.
DC 24V| DC 24V input for 24V 1A power adapter. Note that the extender
supports PoC function, it means that either transmitter or receiver is
connected to 24V/1A power supply, the other doesn’t need power supply.
HDBT IN| RJ45 connector for connecting the HDBT OUT port of transmitter with
CAT 6/6a cable.
HDMI OUT| HDMI output for display.
IR IN| IR input port for receiving the signal of IR remote.
IR OUT| IR output port for control of display device. This IR output signal is
from IR IN port of transmitter.
SPDIF IN| SPDIF connector for optical audio input.
RS-232| 3-pin Phoenix connector for RS-232 command transmission. The RS-232
command will pass-through from transmitter to receiver or receiver to
transmitter.
LAN| Connect to Internet device such as PC or laptop.
Audio Signal Output Switching
Switch the output audio signal source for SPDIF OUT and L/R OUT port via the “Switch” button on the panel (the corresponding LED will illuminate). The states of ARC LED and SPDIF LED indicate the specific output audio signal source, as shown in the table below:
ARC LED State| SPDIF LED State| Output Audio Signal
Source for SPDIF OUT port and L/R OUT port
---|---|---
On| Off| The audio signal returned from HDMI (display device) on receiver
Off| On| The audio signal returned from SPDIF IN on receiver
Off| Off| The audio signal extracted from the transmitter
IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
IR RECEIVER
IR BLASTER
IR Blaster
IR Receiver
Note: IR remote sends signal at the distance of 0~5 meters / 0~8 meters withthe angle of ± 45° in vertical direction.
Application Example
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>