Prestel EFC-4K1000 18Gbps HDMI Over Optical Fiber Extender With Audio Extracting User Manual
- June 13, 2024
- Prestel
Table of Contents
Prestel EFC-4K1000 18Gbps HDMI Over Optical Fiber Extender With Audio
Extracting User Manual
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Introduction
This HDMI Extender can extend HDMI signal up to 33000 feet/10 km (over single- mode fiber cable). It supports video resolution up to 4K2K@60Hz 4:4:4. Transmitter supports loop output, audio embedding and EDID management function. Receiver supports audio extracting function. In addition, the extender supports bidirectional IR control and RS-232 signal pass-through. It can allow you to easily control the display device on the signal source side or control the signal source device on the display side when using this extender.
Features
-
HDMI 2.0b, HDCP 2.2 and DVI 1.0 compliant
-
Support 18Gbps video bandwidth
-
Video resolution up to 4K2K@50/60Hz 4:4:4
-
HDMI audio formats: LPCM2/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby
True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD -
Support 3D and HDR format video, does not support CEC control
-
Transmission distance up to 33000 feet/10 km (over single-mode fiber cable)
*It is possible to use multi-mode fiber with these SFP modules but the distance can not be guaranteed. -
Support bidirectional IR control, RS-232 pass-through and EDID management for simple and convenient control
-
Transmitter supports loop output (sharing local HD video and audio) and audio embedding function
-
Receiver supports audio extracting output function
-
Compact design for easy and flexible installation
Package Contents
- 1× 18Gbps HDMI over Optical Fiber Extender (Transmitter)
- 1× 18Gbps HDMI over Optical Fiber Extender (Receiver)
- 1× IR Blaster cable (1.5 meters)
- 1× IR Receiver cable (1.5 meters)
- 2× 5V/1A Power adapter
- 2× 3-pin 3.81mm Phoenix connector
- 1× User Manual
Specifications
Technical
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2
Video Bandwidth| 18Gbps
Video Resolution| 480i ~1080p50/60Hz, 4Kx2K@24/30Hz, 4K2K@60Hz
Color Space| RGB, YCbCr 4:4:4 / 4:2:2, YUV 4:2:0
Color Depth| 8-bit, 10-bit, 12-bit
HDMI Audio Formats| LPCM2/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD,
DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HDMaster Audio, DSD
Transmission Distance| Up to 33000 feet/10 km over single-mode fiber cable
IR Frequency| 20KHz-60KHz
RS-232 Baud Rate| 4800-115200bps
ESD Protection| Human body model — ±8kV (Air-gap discharge) &±4kV (Contact
discharge)
Connection
Transmitter| Input: 1 x HDMI IN [Type A, 19-pin female] 1 x LINE IN [3.5mm
Stereo Mini-jack] 1 x IR IN [3.5mm Stereo Mini-jack]1 x RS-232 [3.81mm Phoenix
connector] 1 x SERVICE [Micro USB, Update port]Output: 1 x HDMI OUT [Type A,
19-pin female] 1 x Optical Fiber Out [LC female]1 x IR OUT [3.5mm Stereo Mini-
jack]
Receiver| Input: 1 x Optical Fiber In [LC female]1 x IR IN [3.5mm Stereo
Mini-jack]1 x SERVICE [Micro USB, Update port] Output: 1 x HDMI OUT [Type A,
19-pin female]1 x RS-232 [3.81mm Phoenix connector] 1 x IR OUT [3.5mm Stereo
Mini-jack]1 x AUDIO OUT [3.5mm Stereo Mini-jack]
Mechanical|
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver:134mm [W] x 68mm [D] x 18mm [H]
Weight| Transmitter: 280g, Receiver: 278g
**Power Supply| Input: AC 100 – 240V 50/60HzOutput: DC 5V/1A(US/EU
standards, CE/FCC/UL certified)
Power Consumption| Transmitter: 3.85W (Max.), Receiver: 2.7W (Max.)
Operating Temperature| 32 – 104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity**| 20 – 90% RH (no condensation)
Operation Controls and Functions
Transmitter Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | POWER LED | The power indicator is always on when the Transmitter is powered |
on.
2| FIBER LED| The optical fiber connection indicator is always on
when the Transmitter and Receiver establish a normal optical fiber signal
connection.
**** 3| **** HDMI LED| IN: The HDMI signal input indicator is always
on when there is signal input on the HDMI IN port.
LOOP: The HDMI loop output indicator is always on when the HDMI OUT port of
the Transmitter outputs signals to the HDMI display device.
4| IR IN| Connect to IR Receiver cable. The IR signal will send to the IR OUT
port of the Receiver.
5| IR OUT| Connect to IR Blaster cable. The IR signal is from the IR INport of
the Receiver.
6| AUDIO switch| Switch to select audio signal source (HDMI IN or LINE
IN). When there is no video signals input, audio signals can be transmitted
separately.
7| EDID DIPswitch| Dial the switch to set EDID. 11: Copy RX HDMI OUT10:
Copy TX HDMI LOOP OUT01: 4K60_2CH00: 1080P_2CH
8| SERVICE port| Firmware update port.
9| DC 5V| DC 5V/1A power input port.
10| FIBER| Connect the Transmitter optical fiber module, and transmit signals
to the Receiver via an optical fiber cable.
11| HDMI OUT| HDMI signal loop output port, connected to HDMI display device
such as TV or Projector with an HDMI cable.
12| HDMI IN| HDMI signal input port, connected to HDMI source device such as
DVD or PC with an HDMI cable.
13| LINE IN| Audio signal input port, connected to audio source device such as
MP3.
14| RS-232| RS-232 signal pass-through port for transmitting RS-232 command
signals between the Transmitter and Receiver.
Receiver Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | POWER LED | The power indicator is always on when the Receiver is powered |
on.
2| FIBER LED| The optical fiber connection indicator is always on
when the Transmitter and Receiver establish a normal optical fiber signal
connection.
3| HDMI LED| The HDMI signal output indicator is always on when
the HDMI OUT port of the Receiver outputs signals to the HDMI display device.
4| IR IN| Connect to IR Receiver cable. The IR signal will send to the IR OUT
port of the Transmitter.
5| IR OUT| Connect to IR Blaster cable. The IR signal is from the IR IN port
of the Transmitter.
6| SERVICE port| Firmware update port.
7| DC 5V| DC 5V/1A power supply port
8| FIBER| Connect the Receiver optical fiber module, and receive signals from
the Transmitter via an optical fiber cable.
9| HDMI OUT| HDMI signal output port, connected to HDMI display device such as
HDTV or Projector with an HDMI cable.
10| **** AUDIO OUT| Audio signal extracting output port (extract the HDMI OUT
audio signal), connected to audio output device such as amplifier or speaker.
11| RS-232| RS-232 signal pass-through port for transmitting RS-232 command
signals between the Transmitter and Receiver.
IR Pin Definition
IR Receiver and Blaster pin’s definition as below:
IR RECEIVER
IR BLASTER
Optical Fiber Module
- SFP-BL32TG-10DC is the optical fiber module of the Transmitter.
- SFP-BL23TG-10DC is the optical fiber module of the Receiver.
Application Example
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>