Prestel SW-H161MVS 16×1 HDMI Multi Viewer with Seamless Switcher User Manual
- June 13, 2024
- Prestel
Table of Contents
Prestel SW-H161MVS
16×1 HDMI Multi-Viewer with
Seamless Switcher
USER MANUAL
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shook, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
This product is a high performance 16 by 1 Multi-Viewer wit seamless switcher. It supports sixteen High definition input source display on one screen. As a switcher, it can also seamlessly switch the sixteen HD input freely. The product can be controlled by various ways, through the front panel button control and RS-232 control etc.
Features
- Compliant with HDMI 1.3a,HDCP 1.2；
- Supports multiplexed HDMI 16-input and 1-output；
- Supports up to 1080p High Definition resolution；
- Support 16 by 1 Quad Multi-viewer and seamless switch；
- Support scale up, scale down function；
- Support multiple output resolution；
- Support digital audio format LPCM/AC3/DTS
- Support button and RS-232 control；
Package Contents
- 1× 16×1 HDMI Multi-Viewer
- 1× 12V/5A DC Power Adapter
- 1× User Manual
- 1× RS-232 Cable
- 2× Mounting ears
Specifications
Technical|
---|---
Video Bandwidth| 2.25Gbps
Input Ports| 16 x HDMI (Female type),1x RS232
Output Ports| 1 x HDMI (Female type),
Audio output| PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1
Input Resolution| 480i60Hz,480p60Hz,576i50Hz,576p50Hz,720p50/60Hz,
1080i50/60Hz,1080p 24/30/50/60Hz,800×600@60,
1024×768@60,1280×720@60,1920×1080@60;
Output Resolution| 1080p,1080i,720p,1024×768,1360×768
ESD Protection| ±8kV (Air-gap discharge), ±4kV (Contact discharge)
Power Supply| 12V/5A DC (US/EU standards, CE/FCC/UL certified)
Dimensions| 440mm(W)x200mm(D)x45 mm(H)
Weight| 1800g
Chassis Material| Metal
Silkscreen Color| Black
Operating Temperature| 0°C – 40°C / 32°F – 104°F
Storage Temperature| -20°C – 60°C / -4°F – 140°F
Relative Humidity| 20-90% RH (non-condensing)
Power Consumption| 24W
Operation Controls and Functions
5.1 Front Panel
| Number | Name | Function description |
|---|---|---|
| 1 | POWER | Press this button to power the device on/off. The LED will |
illuminate green when the power is on, red when it is in ‘Standby’ mode.
2| LOCK| Press this button to lock all the buttons on the panel, press again
to unlock. The red LED will illuminate when the button is locked. On the
contrary, turn dark when unlock.
3| IR receiver window| Receive the IR from the remote controller.
4| HDMI input selection button area| Press to select the input from 1 to 16.
5| MODE| Press the button to select display mode.
6| RESOLUTION| Press the button to select the output resolution.
NO.| RESOLUTION
---|---
1| 1080P, Main image audio
2| 1080I, Main image audio
3| 720P, Main image audio
4| 1360×768, Main image audio
5| 1024×768, Main image audio
5.2 Rear Panel
| Number | Name | Function descriptions |
|---|---|---|
| 1 | HDMI INPUT Area | Connect HDMI sources. LED 1-16 illuminate when the HDMI |
signal plug in corresponding input port with HDMI cable.
2| HDMI OUTPUT Area| Output for displays, AVR etc. LED illuminate when the
display plug in corresponding output port with HDMI cable.
3| RS-232| Conn ect to a PC or control system with D-Sub 9-pin cable for the
transmission of RS-232 commands.
4| IR EXT| IR extender receiver port, connect with IR receiver cable.
5| DC POWER IN| Plug the 12V/5A connect the adapter DC power supply into the
unit and to an AC outlet.
Detail description of display mode
The 16×1 multi-viewer have 4 display modes.
MODE1:The 16×1 multi-viewer will separate display the sixteen HD input,
and now it is a seamless switcher.
MODE2: The 16×1 multi-viewer divides the four HD input to the same size and display on one screen. And now switch the input button on front panel or IR remote, the HDMI output audio will corresponding to the selected input source.
MODE3: The 16×1 multi-viewer divides the nine HD input to the same size and display on one screen. And now switch the input button on front panel or IR remote, the HDMI output audio will corresponding to the selected input source.
MODE4: The 16×1 multi-viewer divides the sixteen HD input to the same size and display on one screen. And now switch the input button on front panel or IR remote, the HDMI output audio will corresponding to the selected input source.
PC Controller User Guide
Installation
The PC controller is green software. Just use a cable to connect the PC via
RS-232 port and copy “Quad Multi-Viewer.exe” to PC to complete installation.
Preparation
- Connect PC and multi-viewer by RS-232 cable (headers of both sides of cable should be FEMALE).
- Power-up multi-viewer.
- Double click “Quad Multi-Viewer.exe” icon to run it.
- Select PC connect COM port，Click to connect or disconnect PC and multi-viewer and the corresponding light will display.
- Select the HDMI output resolution.
- Select the input source.
- Select the output mode, see the detail description (chapter 6).
- Adjust the HDMI output picture quality.
- Display or hidden the border.
- Display or hidden the OSD menu.
- Input characters in the Set box (The maximum is 16 characters). The user select the input port that needs to be set, then click the Set key on the right. The input port set are completed and it have saved in the following list box. Click the Query key and the corresponding list will display.
- FW upgrade part: Click to open Firmware. The click the upgrade button, the new firmware will auto download to the multi-viewer and restart it.
- Press the Reset button, the quad multi-viewer will reset to factory state.
Application Example
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>